Products in Electronics Coatings: Good Adhesion

HYDRACOAT is the go-to conformal coating for electronics. With top-notch resistance to humidity, moisture, and weather, it offers lasting protection in any setting. Non-conductive and adhesive, it works seamlessly on plastics, glass, ceramic, and metal. Plus, it's non-flammable and water-resistant, making it perfect for defense, automotive, LED, medical, naval, and printed circuit board applications.

Super Shield™ Silver Coated Copper Epoxy Conductive Paint 843ER is a 2-part epoxy-based conductive paint, pigmented with highly conductive silvercoated copper flake. The cured paint is smooth and extremely hard. It is abrasion, scratch, and mar resistant. It adheres very strongly to plastics, including chemically resistant and low energy plastics, as well as metal, glass, ceramic and wood. 843ER is generally used to provide extremely durable EMI/RFI shielding for applications in harsh environments.

Super Shield™ Silver Conductive Paint 842AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with an extremely conductive silver flake. It is smooth, hard, and abrasion resistant. It can be easily applied by brush or spray. It has a quick dry time, with no heat cure necessary. It adheres strongly to most injection-molded plastics, such as ABS, PBT and PVA. It provides superior high frequency shielding. It also provides strong corrosion resistance, and is suitable for use in marine environments. 842AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when the highest level of shielding is required. Also, its thin minimum layer height makes it suitable for board level applications.

844AR is a 1-part, solvent-based, permanent electrostatic dissipative (ESD) coating. It adheres strongly to plastics, paints, metals, and many other surfaces. The cured coating is flexible, durable, and will not crack, chip or peel. The coating can be cured at room temperature or higher. 844AR is commonly used in electronic assembly lines to protect against electrostatic charge build-up on tools, production conveyor and bumpers, assembly trays, workstation surfaces, and enclosures.

844WB is a one-part, clear, water-based ESD paint made from a high quality aliphatic polyester urethane latex. It adheres strongly to plastics, paints, metals, and many other surfaces. The cured coating is flexible, durable, and will not crack, chip or peel. This non flammable, low odor, low VOC coating is used in electronic assembly lines to protect against electrostatic charge build-up on tools, production conveyor and bumpers, assembly trays, workstation surfaces, and enclosures. 844WB can be applied by roller, brush, manual and selective spray equipment.

Highly Conductive Silver Coating for EMI Shielding Semiconductor Packages 842UR is a 1-part, heat-cured, silver polyurethane coating. It is a smooth, flexible coating that provides excellent electrical conductivity at a low film thickness. It maintains flexibility at low temperatures, provides exceptional adhesion to a wide variety of substrates, and provides excellent environmental stability. 842UR is designed for large volume board-level or package-level EMI shielding applications. It can replace traditional metal lid, which reduces cost, board thickness, and mass.

Super Shield™ Silver Coated Copper Conductive Paint 843AR is a conductive paint that consists of a 1-part, solvent-based acrylic lacquer, pigmented with a highly conductive silver-coated copper flake. It is smooth, hard, and abrasion resistant. It is a ready-to-spray system, with no let down necessary. It has a quick dry time, with no heat cure necessary. 843AR adheres strongly to most injection- molded plastics, such as ABS, PBT, PVA and ABS/PC blend. It provides excellent shielding levels at high frequencies. 843AR is designed to provide a conductive coating for the interior of plastic electronic enclosures that suppresses EMI/RFI emissions. It excels when higher levels of shielding are required.

844AR is a one-part, solvent-based, permanent electrostatic dissipative (ESD) coating. It adheres strongly to plastics, paints, metals, and many other surfaces. The cured coating is flexible, durable, and will not crack, chip or peel. The coating can be cured at room temperature or higher. 844AR is commonly used in electronic assembly lines to protect against electrostatic charge build-up on tools, production conveyor and bumpers, assembly trays, workstation surfaces, and enclosures.

ECP 502 JSF023 EMI Shielding Nickel Acrylic Paint single component Nickel/Acrylic conductive coating concentrate provides effective EMI shielding on plastic housings used in the electronics and computer industries. ECP 502/JSF023 EMI Shielding Nickel Acrylic Paint is a single component nickel acrylic conductive coating concentrate that provides effective EMI shielding on plastic housings used in the electronics and computer industries.

ECP 505 EMI Shielding Silver Plated Copper Paint Is supplied ready for use, it is designed to give low resistance in thin film thickness, and exhibits excellent EMI shielding and grounding properties displaying excellent adhesion to most plastics and is ideal for electronic equipment housing. It exhibits excellent long term shielding and grounding properties while providing an esthetically pleasing appearance.

NANOMYTE® SR-500EC is a transparent coating designed to provide easy-to-clean surfaces. The product, a hard, dense and smooth coating, is a nanostructured composite consisting of organic and inorganic phases. The coating resists scratching and chipping, strongly adheres to metal, glass and ceramic surfaces, and has superior water repellency and soil resistance. SR-500EC is a single component product that is easily applied by dip, spray or brush techniques. The coating can be cured at room temperature.

126-28 is a carbon filled, screen-printable, electrically conductive ink suitable for application by screen-printing, dipping and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. 126-28 can be useful in biomedical applications, biosensors, printed heaters, resistive elements and coatings, and for electronic component manufacturing. 126-28 is designed to be age and chemically resistant.Features Very flexible resistive ink

Green Belting 170-20S Red is well suited for Plasma Spray coating and applications involving higher temperatures, this tape resists burning and scorching while leaving clean coating lines and no adhesive residue.

ABchimie™ 42K UV is a UV curable soft one-component resin with good adhesion to a variety of substrates. It is suitable for use in high-thickness deposits (few mm). It cures instantly with UV radiation. ABchimie™ 42K UV protects your components locally, especially against humidity and high electric pressure. It can also be used to improve the robustness of your systems.

Perma-New™ 6000 Class Coatings is a patented technology incorporating silica-filled methylpolysiloxane polymer containing a latent heat-cure catalyst system, in a blend of alcohols. They are colorless, slightly hazy liquids, typically containing 28% solids by weight. Solids content can be reduced to accommodate different application techniques.

ABchimie™ 746E UV LED is a single transparent component designed to protect printed circuit boards in harsh environments. It has dual cure technology (UV/LED - humidity) for shadow crosslinking. ABchimie746E UV LED can be applied using a brush, pad printing, spray machine, and, of course, a selective coating machine, which is the best method. Because of our system's low viscosity, we can limit the thickness to around 80 microns.

ABchimie™ 746E UV is a single transparent component designed to protect printed circuit boards in harsh environments. It uses dual cure technology (UV/humidity) to crosslink in the shadows. ABchimie746E UV can be applied with a brush, pad printing, spray machine, and, of course, a selective coating machine, which is the best method. Because of our system's low viscosity, we can limit the thickness to around 80 microns.

Green Belting 170-10S Red is well suited for Plasma Spray coating and applications involving higher temperatures, this tape resists burning and scorching while leaving clean coating lines and no adhesive residue.

Green Belting 162-7S is ideal as a underwrap in demanding coating applications, this high temperature fiberglass tape has silicone adhesive on both sides. The tape is removed cleanly after use and does not leave any sticky residue.

Green Belting 179-20S has superior adhesion to itself to withstand the extreme conditions of metalizing and plasma spray operations. This high temperature, abrasion resistant multi-ply tape is made with a silicone/glass layer laminated to a heavy gage aluminum foil. The aluminum layer enhances conformability and produces clean edge lines.

Green Belting 170-10S Green has superior adhesion to itself to withstand the extreme conditions of metalizing and plasma spray operations. In most cases, just a single layer of 170-10S Green will withstand both the grit-blast and spray coating processes.

Green Belting 170-20S YL is a standard thermal spray masking tape withstands grit blast and thermal spray, and releases cleanly from metal surfaces. It offers double-layered protection for added strength and resilience.

Green Belting 170-10S YL is standard thermal spray masking tape withstands grit blast and thermal spray, and releases cleanly from metal surfaces. It offers double-layered protection for added strength and resilience.

Green Belting 179-25S has superior adhesion to itself to withstand the extreme conditions of metalizing and plasma spray operations. This high temperature, abrasion resistant multi-ply tape is made with a silicone/glass layer laminated to a heavy gage aluminum foil. The aluminum layer enhances conformability and produces clean edge lines.

AFA-G is a more viscous / gel like version of the successful AFA acrylic conformal coating. It has been designed to be used alongside the other AFA coatings. AFA-G is intended to be dispensed around the base of connectors to act as a permanent masking material. This masking layer will help prevent the capillary flow of material into the connectors, which can cause loss insulation of tabs and loss of connectivity. In addition, the improved resistance to flow of AFA-G can be used to more clearly define difficult keep-out areas during selective coating. . It can also be used to re-enforce sharp edges of critical components which may otherwise be missed by less viscous materials during the coating process.

AFA-S is a modified version of AFA. This ‘Spray’ grade Aromatic Free Acrylic conformal coating has been formulated for use in atomised spray applicators, and manual HVLP spray guns. AFA-S comes pre-mixed to the correct viscosity for these application methods and is a ‘ready for use’ product without requiring any further mixing by the operator.

Electrolube AFA optically clear acrylic conformal coating ideally suited for use as an LED coating or in other commercial applications to protect the PCB from the environment. AFA boasts superb properties, maintaining excellent clarity, with minimal color temperature shift after prolonged UV exposure making it a superb choice for an LED coating application. While it also provides excellent protection in humid environments, and flexibility over a wide operating temperature range.

Perma-New™ V-2 Class (UV-c​​ured) Coatings are proprietary formulations of UV-curable monomers in alcohol solvents. Typically, they will be colorless to pale amber liquids containing 20-50% solids (i.e., polymerizable and non-volatile materials, not including solvents). The percentage of solids is adjusted to match the intended application method. These coatings will adhere to many kinds of plastics without requiring a primer. At a target thickness of 4 to 12 microns, when fully cured, this class of coating will resist 5 double rubs under firm thumb pressure with #0000 steel wool, with few or no visible scratches. even on polycarbonate. Taber abrasion resistance on acrylic or polycarbonate will be outstanding compared to uncoated plastic.

Ultra-Illumina™ 3502 is a UL-compliant, 100% solids UV light curable conformal coating for PCB assembly. It is suitable for use in high-volume spray systems, does not clog valves due to the absence of volatiles, and is environmentally friendly. When fully cured, Incure 3502 forms a hard and resilient protective coating with a thickness of 30 to 150 microns that functions as a moisture barrier with excellent adhesion in harsh environments. The presence of permanent fluorescence allows for quick in-process and quality inspection of coating coverage. Moisture-curing coated components in shadowed areas take 72 hours.

AFA-F is a modified ‘Film Coat’ version of AFA Aromatic Free Acrylic conformal coating. It has been formulated as a ready for use product suitable for selected film coating machines. It is pre-mixed to the correct viscosity to use and does not require any further mixing – eliminating the margin for error involved when the machine operator is required to add solvent.

Green Belting 170-20S Green has superior adhesion to itself to withstand the extreme conditions of metalizing and plasma spray operations. In most cases, just a single layer of 170-10S Green will withstand both the grit-blast and spray coating processes. For more demanding jobs, 170-205 Green provides an extra layer of protection.

ABchimie™ 42K UV LED is a soft one-component UV curable resin with good adhesion to a variety of substrates. It is suitable for use in high-thickness deposits (few mm). With UV LED radiations, it cures instantly. The ABchimie™ 42K UV LED provides local protection for your components, particularly against humidity and high electrical pressure. It can also be used to improve the robustness of your systems.

ABchimie™ AVR80 BA Conformal Coating is a non-toxic, flexible transparent acrylic coating designed to protect electronic circuitry and meet the most stringent resistance requirements. The AVR80 BA is intended to be removed using ABchimie SND or DNS (100 percent Ozone Friendly).

APL Acrylic Protective Laquer is a flexible, fast drying acrylic conformal coating used for the protection of electronic circuitry. It has been formulated for professional use only and meets the requirements of a variety of international standards.

Green Belting 160-10S HT is constructed with an uncoated glass fabric and silicon adhesive, this tape is ideal for secondary masking. It is highly conformable and does not leave any adhesive residue during removal.