Products in Packaging & Assembly: Chemical Resistant

Jyoti Ceramic Zircocem-1 is a 2 component, Zircon based, inorganic ceramic adhesive chemical setting cement, having low thermal expansion.

Cytonix FluoroPel 420-F25M is an innovative fluoro-polymer based conformal coating that protects electronic components from chemicals and humidity based corrosion. Electrical component are expected to withstand a very wide variety exposures and conditions.

Fine-L-Kote HT High-Temp Silicone Conformal Coating is intended to prevent thermal breakdown at high temperatures. Silicone Conformal Coating is the most versatile coating, providing protection in a wide range of environments.

APPLI-TEC 5308 Epoxy is an electrically isolating material, 5308 was designed specifically for underfilling, staking and encapsulating electronics on circuit boards, as well as potting and encapsulating power supplies, transformers, and coils. Featuring a 3-hour pot life, 5308 has good flowability, making it ideal for applications requiring a self-leveling material. The material meets NASA’s outgassing requirements, is resistant to solvents and chemicals, and is considered non-hazardous per D.O.T. regulations.

ALFA GR-104 is an opaque white heat sink grease compound, which is applied to the base and mounting studs of transistor and diodes to provide a positive heat sink seal, this facilitates heat transfer away from electrical/electronic components and into heat sinks, thereby increasing the overall efficiency and performance of the device. GR104 is grease like silicone material, heavily filled with efficient heat conductive zinc oxide and a binding agent, this combination promotes high thermal conductivity, high temperature stability, and the lowest amount of bleed and evaporation.

PAKCOOL® TPC-213-08-DM is a high thermal conductivity Energy efficient 1:1 two-component liquid electronic potting material, available at room temperature or with added cures at temperature.

Nuceq R9-2039/HD-3469 system is 100% solids, cures at high temperature, once cured it has excellent chemical resistance, the system can be gelled at room temperature or high temperature.

Miller-Stephenson Chemical MS-472C Urethane Coating is a non-flammable, solvent-based, one-component polyurethane conformal coating that be applied by brush, spray or dip methods. Our coating provides excellent electrical and barrier properties in a thin-film applications on components and PCBs. When fully cured, the applied urethane coating exhibits superior toughness, abrasion resistance, and excellent moisture and chemical resistance. MS-472C will maintain its properties even after long exposure to the elements with minimal color change.

Resin Technology Group CT-523LV Cationic UV Cure Epoxy Adhesive is an epoxy-based, low viscosity, cationic-curable adhesive and/or sealant. This product is activated by exposure to medium intensity UV radiationresulting in a high strength, chemical resistant, low outgassing polymer system capable of surviving exposure up to 200°C.

The NGAC TC907-07 adhesive is thermally conductive and electrically insulating, and it can be cured at room temperature. It was created for the purpose of assembling heat sensitive components onto printed circuit boards. It is recommended for any application that necessitates strong adhesive bonds as well as excellent thermal transfer. NASA outgassing and weight loss requirements are met by NGAC TC907-07.

DuploCOLL® 15250 HCR is an high temperature and chemical resistant sealing tapes.

Electrolube DCABL SCC3 Blue transparrent conformal coating is designed to offer excellent protection for electronics operating in harsh environments. Based on DCA, DCABL meets the highest defense standards in both Europe and the United States while offering easier inspection with a blue semi-opaque finish. DCABL is resistant to a wide variety of solvents including most solvents used in the aerospace and automotive industries and has a very wide operating temperature range making it an ideal choice for a wide variety of applications. It is also a highly flexible coating making it ideal for small or delicate components, while also maintaining protection through an extremely wide operating temperature range.

PAKCOOL® TPC-230 is 1:1 two-component liquid electronic potting material that can be solidified at room temperature or at elevated temperatures change. In addition to the characteristics of high thermal conductivity, this product also has a thermal expansion rate low and high insulation characteristics, which eliminates electrons more effectively. Destruction of components due to changes in operating temperature.

Eclectic E6100 Industrial Adhesive (Clear) is a unique NON-SAG, non-flammable industrial adhesive formulated to meet highperformance requirements. It permanently adheres to more surfaces than virtually any other adhesive, providing exceptional adhesion to wood, metal, glass, fiberglass, ceramics, masonry, concrete, asphalt, leather, rubber, PVC, neoprene, vinyl and many plastics. This NON-SAG formula will not drip or run and is highly recommended for use in applications requiring vertical hold. E6100 maintains its flexible bond in extreme cold temperatures, will not crack or become brittle and is excellent for bonding items subject to vibration. For applications exposed to direct sunlight, paint over E6100 after curing.

Advenira® AdvenShield™ SDN® Nanocomposite Coating nanocomposite coating provides hard, anti-scratch protection for polycarbonate, glass, and touchscreens.

Anchor Seal SY6500HS Black is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is heat resistant, thermally conductive and used for encapsulation, casting insulators and bushings, laminating, potting coils.

Fine-L-Kote SR Silicone Conformal Coating is the most versatile coating, providing protection in a wide range of environments.

PAKCOOL® TPC-213-08-AT is 1:1 two-component liquid electronic potting material that can be cured at room temperature or at elevated temperatures. In addition to high thermal conductivity, this product also has high temperature resistance and insulation properties advanced features.

Pyra-Sil™ 864 is a one-part conformal coating that cures at room temperature. When applied, it self-levels and cures in 5 minutes (or 25 seconds @150oC) and is primarily used for sealing, potting, seam-filling, and encapsulation applications. After 24 hours of curing at room temperature, it forms a flexible yet durable seal/coat capable of effective protection against weathering, moisture, UV ray damage, and high temperatures. Incure 864 can be coated on a variety of substrates, including metals and plastics, and is suitable for manual brushing as well as high volume automatic dispensing or spraying systems.

HumiSeal® 1A33 is a single component, polyurethane conformal coating, suitable for general printed circuit board applications. HumiSeal® 1A33 contains no free isocyanates and fluoresces under UV light for inspection purposes. HumiSeal® 1A33 coating is MIL-I-46058C qualified, IPC-CC-830B and RoHS Directive 2011/65/EC compliant and recognized under UL File Number E105698.

Jeil Chemical Corporation EPO – 0599 is extremely resistant to abrasion and chemical attack and it is recommended for the protection of concrete surfaces in contact with aggressive environment like acids, oils, alkalies, etc. Therefore, it is developed and formulated for Accessory coating materials. It is once mixed and applied thinly by using a roller or hand work(handicraft). By the virtue of many properties such as excellent adhesive to substrates, chemical resistance, outstanding resistance against abrasion and excellent durability, good workability, and long pot life, It is wildly used for accessory coating materials for handicraft and electrical transparent potting, etc.

Pyra-Sil™ 880 is a one-part, room temperature cure conformal coating used for sealing, potting, seam filling, and encapsulation. It self-levels and cures Tack-Free in 15 minutes. Fully cured in 24 hours at 25oC, it forms a flexible yet durable seal/coat that protects against weathering, moisture, UV ray damage, and high temperatures. Incure 880 can be coated on a variety of substrates, including metals and plastics, and is suitable for manual brushing as well as high volume automatic dispensing systems.

Fine-L-Kote UR Urethane Conformal Coating is a Techspray® product that comes in a variety of coating formulas to meet field and engineering requirements. Specifications are generally determined by the type of protection required. Thermal, moisture, and static resistance, for example. Coatings contain Opti/Scan to allow quality control inspection of coating coverage and evenness on a PCB. When a coated board is exposed to a common, low-cost UV (short-wave black) light, the coated areas glow. The thicker the coating, the brighter the glow.

ThreeBond Europe SAS TB1225B is a one-component silicone adhesive sealants for the bonding, fix-sealing, coating, and potting of electrical and electronic parts. Conventional de-alcohol silicone RTV rubbers have slow surface-curing and deep-curing properties, as well as unsatisfactory storage stability. The products in the 1220 series show remarkable improvements in all these properties. They dry and cure quickly at room temperature, they are resistant to corrosion, and they have excellent storage stability.

ThreeBond Europe SAS TB3001C is a one component solventless adhesive which can be cured by UV and visible light between 200 and 440 nm. TB3001C is particularly fitted to the adhesion and sealing of electrical and electronic components and provide as well an excellent mechanical and chemical resistance.

Electrolube DCB SCC3 Black conformal coating is a specialist modified alkyd coating which has been specifically designed to meet the highest defense standards in both Europe and the United States. Sharing the same properties as DCA, DCB also offers camouflage to the PCB by being black opaque. DCB is a highly flexible coating making it ideal for small or delicate components, while also maintaining protection through an extremely wide operating temperature range. It provides excellent chemical resistance to a wide range of chemicals and solvents such as those found in the automotive and aerospace industries making it an excellent choice for these industries.

Atom Adhesives Iron-Bond (Rigid Staking Compound Epoxy Adhesive) is a two part, heat-resistant and low exotherm, epoxy adhesive formulation. It is a 100% solid epoxy adhesive, with superior chemical resistance and shear strength. Iron-Bond contains a thixotropic agent which impedes thinning out of the material during heat cure when properly mixed and cured.

HumiSeal® 1A27 is a single component, polyurethane conformal coating, suitable for general printed circuit board applications. HumiSeal® 1A27 contains no free isocyanates. HumiSeal® 1A27 coating is RoHS Directive 2002/95/EC compliant and recognized under UL File Number E105698.

PERMABOND® TA459 is a structural acrylic adhesive designed primarily for bonding metals, ferrites, ceramics and some thermoplastics. This product was specifically designed to be non-corrosive to sensitive copper parts or other electrically conductive surfaces. The fast curing rate and rapid strength development of this material allows for increased production rate.

Pyra-Sil™ 891 is a one-part, room temperature cure conformal coating used for sealing, potting, seam filling, and encapsulation. It self-levels and cures tack-Free in 8 minutes. Fully cured in 24 hours at 25°C, it forms a flexible yet durable seal/coat that protects against weathering, moisture, UV ray damage, and high temperatures. Incure 891 fluoresces under blacklight for inspection and can be coated on a variety of substrates including metals and plastics. It is designed for manual brushing as well as high volume automatic dispensing systems.

WESCOAT® WC04P7 is a coating product that will guarantee performance and longer lifespans. WESCOAT® WC04P7 addresses the chemical, wear and erosion issues.

The NGAC EC907-34 is a two-part, electrically conductive silver-filled epoxy adhesive that cures at room temperature. It was created for applications that require superior mechanical and electrical properties.

Miller-Stephenson Chemical MS-470C Urethane Conformal Coatings is a non-flammable, solvent-based, one-component polyurethane conformal coating provided in the convenience of aerosol. Our coating provides excellent electrical and barrier properties in a thinfilm applications on components and PCBs. When fully cured, the applied urethane coating exhibits superior toughness, abrasion resistance, and excellent moisture and chemical resistance. MS-470C will maintain its properties even after long exposure to the elements with minimal color change.

Durabond™ 4701 is a one component, toughened adhesive and casting compound that has excellent adhesion to metals, glass, ceramics and most plastics.

Anchor Seal SY3002 Amber Clear is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is good / stable shelf life, low viscosity, unfilled, heat and chemical resistant.

Polytec TC 417 2 is a two component, thermally conductive, electrically insulating epoxy It is used in various thermal management applications, especially for potting of large volumes. Polytec TC 417 2 has an excellent chemical and moisture resistance It has an excellent adhesion to glass, metal, ceramic, FR 4 and most plastics. The room temperature cure allows to bond temperature sensitive substrates very conveniently The material can be applied via dispensing or manual application.