Products in Potting Compounds: Low Viscosity

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

GENIOSIL® XT 55 is a silane-terminated polymer suitable for use in moisture-curing formulations. It readily dissolves in standard organic solvents while being virtually insoluble in aqueous media. When used, it reacts slowly, releasing methanol and forming a resinous deposit. GENIOSIL® XT 55 finds applications in various fields such as assembly adhesives (including hybrids), building and construction adhesives, and industrial adhesives.

GENIOSIL® XB 502 is a silane-terminated binder based on alpha-silane technology, specifically designed for formulating high-strength adhesives. It finds applications in various areas, including building and construction adhesives, do-it-yourself projects, and industrial adhesives. One of its specific uses is for wood-to-wood bonding.

GENIOSIL® XT 50 is a silicone-modified polyether-based silane-terminated polymer suitable as a binder in moisture-curing formulations. It differs from conventional silylated polymers due to its high reactivity. This results from the structural proximity of the nitrogen atom to the silicon atom in the dimethoxy(methyl)silyl-methylcarbamate group (alpha-effect). It hydrolyzes in the presence of moisture to form a stable siloxane network initiated by mild catalysis, rather than heavy metal ions.

GENIOSIL® ZK 23 is a binder that utilizes a siloxane reinforced alpha-silane technology. It is specifically designed for coating and adhesive applications. Notably, its exceptional resistance to water provides opportunities for formulating plasticizer-free two-pack adhesives. GENIOSIL® ZK 23 is a transparent and low viscosity polymer. Once cured as a coating or adhesive, it exhibits high hardness values in the Shore D range.

Portaflame® SG 10 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 10 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels.

Portaflame® SG 63 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG10 LV-02 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 100 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG10 LV-01 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 55 LV are produced from carefully selected, synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG LV are "low viscosity" optimized grades with exceptional low oil absorption values, giving the formulator the opportunity to achieve higher loading levels. It is used to make flame retardant aluminum sandwich panels.

Portaflame® SG 200 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 10 LSA is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 10 LSA is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. It is not a dangerous substance (DSD or CLP) and does not contain substances of very high concern (SVHC), including their fire decomposition products.

Portaflame® SG 55 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 30 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 30 LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 30 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels. Portaflame® SG 30 LV makes formulations that are flame retardant.

Portaflame® SG 50 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 40 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 25 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 10 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 35 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Portaflame® SG 20 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation.

Cardolite® NC - 513 is a monofunctional reactive epoxy diluent used to increase flexibility, impact resistance, water resistance, and flexural strength. It has low viscosity and volatility, making it ideal for formulating solvent-free adhesives. It exhibits good water resistance and reacts completely into the epoxy network, enhancing bond strength.

Finomide 1160 is a reactive polyamides which are utilized primarily as curing agents for epoxy resins used in surface coatings ,Adhesives, Decorative Coatings, Laminations, Pottings.

NADIC methyl anhydride (NMA) is a liquid alicyclic anhydride commonly used to cure epoxy resins in many challenging applications, including fiber reinforced composites used in high performance aerospace and military applications, as well as mechanically demanding applications like filament wound bearings. The excellent electrical properties and high temperature performance make NMAcured epoxies outstanding materials for encapsulating electronic components and circuits. NMA demonstrates many excellent characteristics when used as a curing agent for epoxy resins

EPOTUF® 37-640 is a polyamide curing agent based on dimerized fatty acids and polyethylene amines for room temperature curing of EPOTUF® epoxy resins.

EPOTUF® 37-630 is an accelerated amido-amine curing agent for room temperature curing of EPOTUF® epoxy resins.

Technicure® 54 is commonly used as a cure accelerator in epoxy resin based formulations. Typical loading level as an accelerator is about 0.5 to 8 phr in a standard DGEBA type liquid epoxy resin EEW=190) based formulation.

EPOTUF® 37-127 is a low viscosity 100% reactive diluted liquid epoxy resin based on Bisphenol A and which contains EPOTUF® 37-058 (C12 - C14 glycidyl ether).

ECA 100NC is a low viscosity, light colored, non-crystallizing which blend is based blend of methylhexahydrophthalic anhydride, hexahydrophthalic anhydride, and methyltetrahydrophthalic anhydride.. This liquid anhydride epoxy curing agent is designed for converting epoxy resins to highly cross-linked polymers with excellent physical and electrical properties.

Super SAP® CCR/CCF is a clear, UV-stabilized epoxy system designed specifically for casting, potting, and embedding applications. Low color and low viscosity allow for bubble-free, crystal-clear castings ideal for art and hobby applications. This Super Sap® Formulation features two hardener speeds: slow (CCS) for high-build casting epoxy applications and fast (CCF) for quick, small project fast casting epoxy applications such as resin jewelry and more.

Chemline X-75410 is a clear polyurethane compound for use on decals, labels, emblems, and other decorated substrates. Also suitable for potting solar cells.

Super SAP® CCR/CCS is a clear, UV-stabilized epoxy system designed specifically for casting, potting, and embedding applications. Low color and low viscosity allow for bubble-free, crystal-clear castings ideal for art and hobby applications. This Super Sap® Formulation features two hardener speeds: slow (CCS) for high-build casting epoxy applications and fast (CCF) for quick, small project fast casting epoxy applications such as resin jewelry and more.

Chemline X-7377 is a clear polyurethane compound.

ECA 106 is a low viscosity liquid anhydride epoxy curing agent based on methyltetrahydrophthalic anhydride. For convenience, it is pre-catalyzed with an accelerator that contributes to good glass transition temperature (Tg) in cured polymers. It is designed for use in converting epoxy resins to highly crosslinked polymers with excellent physical and electrical properties. ECA 106 is used in demanding applications including laminating and filament winding. It can also be used in electrical applications such as casting, potting and encapsulation.

Chemline X-7250M is a clear polyurethane compound for use on decals, labels, emblems, and other decorated substrates. It is a low viscosity material that is suitable for potting solar cells.

EPOTUF® 37-606 is a modified, aliphatic, polyamine curing agent for room-temperature curing of EPOTUF® epoxy resins.