Products in Potting Compounds: Resin

ALBIFLEX® 297 is a bisphenol-A-epoxy-silicone block copolymer resin that excels in crafting high-performance elastomers. This versatile liquid, responsive to epoxy, seamlessly cures when combined with aliphatic and cycloaliphatic epoxy resin curing agents. ALBIFLEX® 297 accommodates various conventional casting and molding techniques for your manufacturing needs.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Cosmic Epoxy EH21 is an iron-filled epoxy molding compound provided in a black granular form. It is well-suited for applications requiring EMI (Electromagnetic Interference) and RFI (Radio-Frequency Interference) shielding. This material can be molded through compression or transfer molding processes to create core rods or to encapsulate surface mount and axial leaded inductors. It offers the advantage of simplifying the molding process by eliminating the need for labor-intensive over/under molding.

Cosmic Epoxy E4940P is a mineral-filled, glass-reinforced epoxy molding compound supplied in granular form. It is specifically designed for high-volume encapsulation applications, particularly for resistor networks and fiber-optic connectors. This compound offers high quality, reliability, and good moldability for such applications.

Farboset® 2500 is a mineral-filled, flame-retardant, novolac epoxy molding compound that offers fast cure rates at low temperatures, laser markability, and good moldability. This compound is formulated for encapsulating surface mount ceramic and tantalum capacitors, along with other applications that require quick cycle times. Its flame-retardant properties make it suitable for applications where fire safety is a concern, while its rapid curing and ability to be laser marked enhance its utility in modern production processes.

Farboset® 2220 is a granular, mineral-filled, novolac epoxy molding compound known for its excellent moldability, fast cure rate, and strong physical and electrical properties. It is specially designed for high-performance applications that demand enhanced thermal characteristics. These applications include the encapsulation of bushings, insulators, and various electrical and electronic components. The compound's properties make it a reliable choice for protecting and ensuring the performance of critical components in challenging environments.

Cosmic Epoxy EH81 is an iron-filled epoxy molding compound available in a black granular form. It is specifically designed for EMI/RFI shielding applications and can be used in both compression and transfer molding processes to create core rods or encapsulate surface mount and axial leaded inductors. The advantage of this material is its ability to simplify the manufacturing process by eliminating the labor-intensive over/under molding steps.

Farboset® 2270 is a granular epoxy molding compound that contains a combination of glass and mineral fillers. It is based on a novolac epoxy resin and is designed for encapsulating various electrical and electronic components, including capacitors, resistors, hybrids, and more. This compound is known for its good moldability and fast cure rates, especially at lower molding temperatures. It offers excellent performance and reliability for applications where these characteristics are crucial.

Cosmic Epoxy E4930R is a mineral-filled epoxy molding compound supplied in granular form. It is designed for encapsulating various electronic components, including optocouplers, capacitors, resistors, resistor networks, transistors, SOICs (Small Outline Integrated Circuits), and QFPs (Quad Flat Packages). This material helps protect and insulate these components, ensuring their proper functioning in electronic applications.

Cosmic Epoxy E4920CD is designed for the thermoset molding of electronic encapsulation. It is available in a solid form, offered as granules, preforms, or powders, and is available in various colors. This product has a mild odor and is insoluble in water, making it well-suited for a wide range of electronic applications. Additionally, it does not exhibit reactivity under normal conditions, ensuring safety and reliability in its intended use.

Cosmic Epoxy E4920 is a mineral-filled epoxy molding compound available either in granular form or preformed in various sizes and weights. It features excellent moisture resistance, thermal cycling stability, and remarkable moldability. Furthermore, parts molded from this material do not support fungus growth, and it is specifically designed for the encapsulation of passive devices, including capacitors, inductors, diodes, and rectifiers.

Farboset® 2510 is a mineral-filled, novolac epoxy molding compound known for its fast cure rates at low temperatures, excellent laser markability, and good moldability. This compound is specially formulated for encapsulating surface mount ceramic and tantalum capacitors, as well as other applications that demand quick cycle times. Its unique properties and rapid curing make it well-suited for applications where fast production and efficient marking are essential.

Cosmic Epoxy E4920AT is designed for the thermoset molding of electronic encapsulation. It is available in a solid form, provided as granules, preforms, or powder, and comes in various colors. This product has a mild odor and is insoluble in water, making it well-suited for a wide range of electronic applications. Additionally, it does not exhibit reactivity under normal conditions, ensuring safety and reliability in its intended use.

DAP D44/6160 is a mineral-filled, special-purpose diallyl ortho-phthalate molding compound supplied in a free-flowing granular form. It can be easily molded using compression, transfer, or injection equipment and can be readily preformed. It surpasses all mineral compounds available today in terms of mechanical and electrical properties. It boasts extremely low water absorption, high dielectric strength, and a low dissipation factor, along with high tensile strength, exceptional arc resistance, and excellent resistance to high temperatures.

Farboset® 2461 is a mineral-filled novolac epoxy molding compound that offers fast cure rates, excellent moldability, and superior thermal shock and moisture resistance. It has been formulated to achieve a high glass transition temperature, making it suitable for applications requiring optimal reliability performance, even in very thin sections. Farboset® 2461 is designed for encapsulating a wide range of electronic devices, including capacitors, resistors, resistor networks, and inductor coils, ensuring their protection and reliability in various operating conditions.

Cosmic Epoxy EH61 is an iron-filled epoxy molding compound provided in a black granular form. It is designed for EMI/RFI shielding applications and can be utilized in compression or transfer molding processes to manufacture core rods or encapsulate surface mount and axial leaded inductors. This single molded compound streamlines the manufacturing process, eliminating the labor-intensive over/under molding steps.

Farboset® 1708 is a specialized epoxy molding compound that combines mineral and short glass fillers, making it well-suited for the encapsulation of coils and other electrical and electronic components. It offers excellent moldability, which is important for achieving precise shapes during the encapsulation process. One of its standout features is its extreme resistance to thermal shock, meaning it can withstand rapid changes in temperature without cracking or degrading.

Cosmic Epoxy E4920FC is a mineral-filled epoxy molding compound available either in granular form or preformed in a variety of sizes and weights. It offers excellent moisture resistance, thermal cycling stability, and outstanding moldability. Parts molded from this material also resist fungus growth and are designed for the encapsulation of passive devices such as capacitors, inductors, diodes, and rectifiers.

DAP 306 is a general-purpose diallyl ortho-phthalate molding compound filled with Orlon and supplied in flake form. It is suitable for a variety of applications, including switches, terminals, insulators, cups, cases, and other components that require strength as well as chemical and moisture resistance. It can also be used for the encapsulation of electrical and electronic components.

DAP D33/6120 is a versatile general purpose diallyl ortho-phthalate molding compound that incorporates short glass fibers for added strength. Supplied in a free-flowing granular form, it is designed for ease of use in molding applications. This compound can be easily molded using compression, transfer, or injection equipment, and it can also be readily preformed to suit the specific requirements of the application. Its blend of properties makes it suitable for a range of molding applications where strength and versatility are essential.

Cosmic Epoxy E4920AC is designed for the thermoset molding of electronic encapsulation. It is available in a solid form, provided as granules, preforms, or powder, and is offered in various colors. This product features a mild odor and is insoluble in water, making it suitable for a wide range of electronic applications. Additionally, it does not exhibit reactivity under normal conditions, ensuring safety and reliability in its intended use.

Cosmic Epoxy EH71 is an iron-filled epoxy molding compound available in a black granular form. It is well-suited for EMI/RFI shielding applications and can be used in either compression or transfer molding processes to create core rods or encapsulate surface mount and axial leaded inductors. The advantage of this material is its ability to streamline the manufacturing process by eliminating the labor-intensive over/under molding steps.

Farboset® 1707-2 is a mineral and glass-filled, anhydride epoxy molding compound that is engineered for the encapsulation of various electrical and electronic components. It is specifically formulated to provide high thermal shock resistance, making it ideal for protecting components that may be subjected to rapid temperature changes or other harsh environmental conditions. This compound helps ensure the reliability and durability of encapsulated components.

Cosmic Epoxy EH31 is an iron-filled epoxy molding compound available in a granular form with a black color. This material is designed for EMI/RFI shielding applications. It can be used for compression or transfer molding to create core rods and encapsulate surface mount and axial leaded inductors. Using this single molded compound can streamline the manufacturing process and eliminate the need for labor-intensive over/under molding.

DAP D72/6120F is a versatile diiallyl ortho-phthalate molding compound, filled with short glass fibers and featuring flame retardant properties. Supplied in a free-flowing granular form, this compound is well-suited for a variety of molding applications. It can be easily molded using compression, transfer, or injection equipment and can be preformed with ease. An important distinction is that it has passed NASA outgassing tests, indicating its suitability for applications with stringent outgassing requirements, particularly in industries like aerospace where such standards are critical.

Farboset® 1180 is a granular, glass-filled, general-purpose anhydride epoxy molding compound. It is formulated for encapsulation applications where excellent thermal shock resistance and physical strength are required. This compound helps protect electronic and electrical components by providing thermal shock resistance and maintaining their integrity under challenging conditions.

Cosmic Epoxy EH40 is an iron-filled epoxy molding compound available in a black granular form. It is suitable for EMI/RFI shielding applications and can be used for compression or transfer molding to create core rods or encapsulate surface mount and axial leaded inductors. This material simplifies the manufacturing process by allowing for single molded applications, eliminating the need for labor-intensive over/under molding.

Farboset® 2460 is a novolac epoxy molding compound filled with minerals. It is designed for encapsulating a variety of electrical and electronic components, including tantalum and ceramic capacitors, resistors, resistor networks, and high-performance coils. This compound is formulated to provide fast cure rates, excellent moldability, and superior resistance to thermal shock and moisture. It has been specifically designed to offer improved resistance to moisture ingress, making it a reliable choice for applications where moisture resistance is crucial.

Farboset® 1160 is a granular, mineral-filled, anhydride epoxy molding compound designed for the encapsulation of various electrical and electronic components. It offers fast cure rates, long flow, and excellent thermal shock resistance. This compound is suitable for applications involving the encapsulation of coils, transformers, capacitors, diodes, relays, and other components that require good hot rigidity during the molding process.

Cosmic Epoxy EH51 is an iron-filled epoxy molding compound available in a black granular form. It is designed for EMI/RFI shielding applications and can be used in compression or transfer molding processes to create core rods or encapsulate surface mount and axial leaded inductors. This material simplifies the manufacturing process by allowing for single molded applications, eliminating the labor-intensive over/under molding.

Farboset® 1115 is a granular, mineral-filled, anhydride epoxy molding compound with fast cure rates and excellent hot strength. It is specially designed for encapsulating various electrical and electronic components, including coils, transformers, bushings, switches, and more. The material offers good hot rigidity during the molding process and is commonly used in injection and transfer molding applications.