Products in Potting Compounds: Good Adhesion

POWERSIL® GEL FC A/B is a pourable, two-component silicone mixture that cures at room temperature to form a soft silicone gel. This product exhibits a very fast curing behavior, allowing for quick processing times. The resulting vulcanizate is transparent and possesses excellent mechanical damping properties, making it suitable for applications requiring vibration absorption. Furthermore, it is a non-bleeding gel, ensuring its stability and reliability.

POWERSIL® GEL A/B is a pourable, two-component silicone mixture that cures at room temperature to form a transparent, very soft silicone gel. The resulting vulcanizate exhibits excellent mechanical damping properties, providing effective vibration absorption. Additionally, this gel is non-bleeding, ensuring its stability and integrity over time.

CHT Group TufGel 330 is one of a family of soft, adherent, silicone elastomeric gels designed for the encapsulation and protection of electronic components. It is a low-viscosity, two-component system that is readily mixed in a 1:1 ratio. It is used to provide protection from vibration, thermal or mechanical shock, water, and many other environmental contaminants. This product has excellent dielectric properties.

SC-550-LV-TC-1 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-1 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.

SC-550-LV-RT is a 100% silicone solid elastomer designed for electronic potting applications. This two-component, room temperature curing system offers a hard, self-bonding, thermally conductive, low modulus material that is readily re-workable.

UV-8403 is a low viscosity, light curing epoxy adhesive that bonds well to a wide variety of substrates including engineered plastics such as UltemTM, LexanTM, and ABS. This product exhibits good surface wetting and adhesion to glass and many plastics. UV-8403 cures to a clear polymer when properly cured. This product requires direct light exposure during cure. Because of the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cure in the presence of UVA light (310-365nm).

UV-8311 is a low viscosity, fast curing, light curing epoxy adhesive that offers excellent strenth wetting properties. UV-8311 cures to a high Tg, rigid polymer with excellent adhesive to metals, ceramics, and glass.This product requires direct light exposure during cure. UV-8311 can cure fully in under 10 seconds using optimal cure conditions. Due to the variability of different UV/LED light sources, it is suggested that the user test and specify intensity and exposure time. This product will cures best in the UVA wavelengths

LEEBOND 37-75 is a proprietary two-part epoxy adhesive used in both electrical-grade potting and structural adhesive applications. Cured systems demonstrate excellent toughness, impact resistance and exceptional bond strength for hard to bond to substrates. This system can be cured at both room temperature or accelerated with modest heating.

LEECAST 38-191 is a proprietary two-part epoxy adhesive and encapsulating compound. It has been used extensively for potting lead wires in UL-listed commercial gasoline pumps. LEECAST 38-191 has exceptional chemical resistance, especially in respect to gasoline, various gasoline alcohol additives, and other aggressive organic solvents. It also features fast room temperature cure and excellent adhesion to a variety of wire coatings and other substrates. It is formulated with enough thixotropy to inhibit sag on vertical surfaces and self-leveling when applied in a bead on horizontal surfaces.

CHEMSET® EE5101 Epoxy Potting Compounds is a Red filled resin system with excellent electrical properties developed for use where a fire-retardant potting compound was required for civil radar EHT units operating at up to 22,000 volts. It has excellent insulation, adhesion and water resistant properties due to the epoxy resin binder.

CHEMSET® EE5123 Lightweight Epoxy Potting Compound (Syntactic Foam) is a medium cure time lightweight potting compound sold in pre-weighed Semkits to enable ‘on site’ use without having to use metering equipment. Excellent insulation, adhesion and water resistant properties and low exotherm. It gives a pre-determined exact volume of foam in the casting.

CHEMSET® EE5103 Epoxy Potting Compounds is a Yellow filled resin system with excellent electrical properties developed for use where a fire-retardant potting compound was required for civil radar EHT units operating at up to 22,000 volts. It has excellent insulation, adhesion and water resistant properties due to the epoxy resin binder.

CHEMSET® EE5120 Lightweight Epoxy Potting Compound (Syntactic Foam) is purpose made for use when a lightweight potting compound is needed. Good electrical insulation properties maintained by the siliceous nature of the lightweight filler. Good adhesion and water-resistance are also key features.

CHEMSET® EE5102 Epoxy Potting Compounds is a Green filled resin system with excellent electrical properties developed for use where a fire-retardant potting compound was required for civil radar EHT units operating at up to 22,000 volts. It has excellent insulation, adhesion and water resistant properties due to the epoxy resin binder.

CHEMSET® EE5122 Lightweight Epoxy Potting Compound (Syntactic Foam) is developed for producing larger castings when a lightweight potting compound is needed. Good electrical insulation properties together with excellent adhesion, water resistance and durability.

GS Polymers GSP 1603-6DS is a version of GSP 1603-5 that has been modified to allow packaging in a side-by-side (sbs) cartridge.

A black, low viscosity, 100% solids epoxy system designed for maximum impregnation and flow. 506-CA803 is great for electrical potting and encapsulating, bonding and coating. This epoxy has high impact strength and exhibits excellent adhesion to metal materials.

Jeil Chemical Corporation EPO – 513 is extremely resistant to abrasion and chemical attack and it is recommended for the protection of concrete surfaces in contact with aggressive environment like acids, oils, alkalies, etc. Therefore, it is developed and formulated for Accessory coating materials. It is once mixed and applied thinly by using a roller or hand work(handicraft). By the virtue of many properties such as excellent adhesive to substrates, chemical resistance, outstanding resistance against abrasion and excellent durability, good workability, and long pot life, It is wildly used for accessory coating materials for handicraft and electrical transparent potting, etc.

Sil-Flex SL RTV-7525 (Neutral) is a self-leveling one component, low modulus, neutral cure silicone sealant and adhesive. When fully cured, this unique VOC compliant formula offers UV stability and tenacious adhesion. It is frequently used for coating electronic components and terminals or sealing pitch pockets and window seams. This product is specifically formulated to offer all weather performance to meet today's Green Building Standards.

Jeil Chemical Corporation EPO – 0599 is extremely resistant to abrasion and chemical attack and it is recommended for the protection of concrete surfaces in contact with aggressive environment like acids, oils, alkalies, etc. Therefore, it is developed and formulated for Accessory coating materials. It is once mixed and applied thinly by using a roller or hand work(handicraft). By the virtue of many properties such as excellent adhesive to substrates, chemical resistance, outstanding resistance against abrasion and excellent durability, good workability, and long pot life, It is wildly used for accessory coating materials for handicraft and electrical transparent potting, etc.

GS Polymers GSP 1603-3 is a two-part polyurethane compound used for electrical potting encapsulation. This system offers one to two hours of working time and is ideal for hand mixed applications.

Filter-bond R-3738 is a structural adhesive system specifically developed to bond filter media in Filter and Ultrafiltration applications. Filter-bond R-3738 provides excellent adhesion to similar and non-similar substances. It is also chemically resistant.

GS Polymers GSP 1603-5 is a two-part polyurethane compound used for electrical potting encapsulation.