Products in Batteries: Polyolefins

Noblen® AGM 350 Natural is a polypropylene impact copolymer. True reactor grade provides consistent natural color making colorability very easy.   Applications:  Large components  Appliances  Automotive Interior Trim Boat Jet-propelled Vehicle    Features:  High Melt Flow    Benefits: Easy moldability with low pressure.  Consistently easy to color Quick cycle time

Espolex® 3255 is a TPV known for its excellent colorability and appearance. It forms strong bonds with polypropylene compounds and polyethylene, while exhibiting thermoplastic processing characteristics combined with rubber-like properties. It is particularly well-suited for two-shot molding. Its applications include: Handle grips Gaskets Active spoilers Appliances Automotive exterior trim Automotive interior trim Boats Jet-propelled vehicles Mud flaps Weatherstripping Over-molding Injection molded parts   Features: Excellent flowability Great surface appearance for styling Easy bonding with other materials Benefits: Anti-slip properties Noise reduction

Noblen® CHN-250 Natural is a talc-filled polypropylene impact copolymer with high stiffness. It is used in automotive interior applications requiring an excellent balance of impact, flow, and stiffness. This product is suitable for Injection molding.   Applications: Large components Appliances Automotive Interior Trim Boat Jet-propelled Vehicle   Features: Good stiffness with impact performance and high Melt flow   Benefits: Easy to fill large parts

Espolex® CPD-450 is a Thermoplastic Elastomer which processes like a thermoplastic and acts like a rubber with excellent flowability. Good balance of stiffness and durometer. Applications: Bin and Floor Mats Appliances Automotive Exterior Trim Automotive Interior Trim Boat Jet-Propelled Vehicle Mud Flaps Weatherstripping Over-molding Injection Molded Parts   Features: Heat Stabilized Black High Melt Flow   Benefits: Anti slip Noise reduction

Noblen® BPC 80 Natural is a polypropylene impact copolymer with 20% talc fill. ultra-high melt flow, which is excellent for low pressure molding and foaming (core back).   Applications: Large parts requiring ultra high flow and stiffness. Appliances  Automotive Interior Trim Boat Door Panel Jet-propelled Vehicle    Features: Heat Stabilized Very High Melt Flow   Benefits: Quicker cycle times Lower Pressure Molding

Noblen® AGM 250 Natural is a polypropylene impact copolymer with excellent cold temperature impact strength. True reactor grade with medium flow ability Low-stress whitening   Applications: Large parts requiring high impact. Appliances Automotive Interior Trim Head Impact Boat Jet-propelled Vehicle   Features: -20 ⁰C Temperature Ductility Good Scratch Resistance     Benefits: Low-stress whitening High Melt flow and impact balance Consistently easy to color

MOCOM Compounds ALTECH® PP-H A 2340/750 GF30 GK10 CP is a polypropylene homopolymer with a filler/additive system of 30% glass fibers and 10% glass beads, which is chemically coupled, highly heat stabilized, has a good flow, low warpage, easy release (demolding), slip agent, and processing stabilized. It is suitable for a variety of applications, such as electrical and electronic, automotive and interior decoration/finishing, exterior parts, electrical components, housings, functional components, automotive powertrain parts, and batteries.

PELECTRON PVL is a polymer-alloy type permanent antistatic agent for polyolefin resins (e. g. polyethylene, and polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded without a kneading process because this product exhibits excellent dispersibility in polyolefin. In addition, compared to conventional permanent antistatic agents, PELECTRON PVL exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of polyolefin.

PELECTRON PVH is a polymer-alloy type permanent antistatic agent for polyolefin resins (e. g. Polyethylene, and polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded without a kneading process because this product exhibits excellent dispersibility in polyolefin. In addition, compared to conventional permanent antistatic agents, PELECTRON PVH exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of polyolefin.

PELESTAT 300 is a polymer-alloy type permanent antistatic agent for polyolefin resins (e.g. Polyethylene, polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded into the final product, using appropriate molders such as an injection molding machine, an extrusion molding machine and a calender, without a kneading process because this product exhibits excellent dispersibility in polyolefin.

PELESTAT NC7530 is a permanent antistatic agent for styrene resins which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a permanent antistatic property when blended with styrene resins while causing practically no lowering of their physical properties and moldability. It minimally affects the transparency of styrene-acrylic copolymer (MS resin) with a refractive index of approx. 1.53.

PELECTRON AS is a polymer-alloy type permanent antistatic agent for styrene resins which were developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to styrene resins such as ABS resin and PC/ABS resin by being kneaded into them while causing practically no lowering of their physical properties and moldability. In addition, compared to conventional permanent antistatic agents, PELECTRON AS exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of styrene resins.

SAHARA C 070BA is impact copolymer with medium flow viscosity used in injection molding. This grade is characterized by a medium stiffness-impact balance at low temperature as well as a low warpage tendency. The additive formulation provides a good heat aging resistance. This product is typically used in applications that requires high resistance to temperature. This characterized with good heat aging resistance, good impact with low warpage.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = 38 micron, D100 = 70 micron.

RG 2800 K is a Polypropylene Block Copolymer Impact With High Toughness. It is used in Automotive (Bumpers, Fender, Battery Cases), Compounding (Impact Modifier)

J-320 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. J-320 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

JI-350 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. JI-350 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

Cosmoplene® AV161 by The Polyolefin Company (TPC) is comprised of Polypropylene (unspecified). It is commonly used Cosmoplene® AV161 is certified as UL Flame Rated.

RG 2700 L is a Polypropylene Block Copolymer Impact With High Toughness. It is used in Cable Wheels, Automotive (Bumpers, Mudguards, Fender, Battery Cases)

Characteristics: Control reologhy Impact Block Copolymer polypropylene; high impact/stiffness balance; excellent thermal stability. Recommended for: Injection molding of batteries cases, automotive parts, housewares; injection molding general purpose applications.

Characteristics: Control reologhy Impact block copolymer polypropylene; high impact/stiffness balance; good thermal stability and chemicals resistance. Recommended for: Injection molding of batteries cases, buckets, industrial parts, toys, containers; injection and extrusion molding general purpose applications.

J-350 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. J-350 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

Safron® C722 - 07NA is polypropylene resin which is a nucleated impact copolymer with high impact strength, good flow and a narrow molecular weight distribution (MWD). It is used for general purpose complex injection molding applications where toughness is required. The narrow MWD leads to a high dimensional stability in complicated articles. Safron® C722-07NA Polypropylene Resin contains an antistatic additive.

Cosmoplene® AW161 by The Polyolefin Company (TPC) is comprised of Polypropylene (unspecified). It is commonly used Cosmoplene® AW161 is certified as UL Flame Rated.

RG 2900 H is a Polypropylene Block Copolymer Impact With High Toughness. It is used in Automotive (Bumpers, Fender, Battery Cases), Compounding (Impact Modifier)

RG 2800 XK is a Polypropylene Block Copolymer Impact With High Toughness. It is used in Automotive (Bumpers, Fender, Battery Cases), Compounding (Impact Modifier)

ElectriPlast® EP-SS/PP is Polypropylene with Stainless Steel Fiber as core fiber.

Moplen EP440M is the high isotacticity polypropylene block copolymer manufactured by PMC under the license of Lyondellbasellusing the Spheripol process. Moplen EP440M is a block copolymer and it is typically used by customers for injection molding of battery case.

ElectriPlast® EP-CF/PP is Polypropylene with Nickel Plated Carbon Fiber as core fiber.

PETILEN YY I768(UV) is a high density polyethylene resin developed for injection molding applications. Having narrow molecular weight distribution, PETILEN YY I768(UV) is an ideal raw material for the manufacture of products requiring rigidity and toughness. The resin is stabilized against UV radiation to allow prolonged exposure to sunlight.

Jinyoung (Xiamen) Industrial Long Glass Fiber Reinforced PP is Better cost-effectiveness compared to PA and PBT , Low water absorption , Excellent resistance to mechanical performance degradation , Excellent strength , Inject molding capability.

Polymer Industries' Densetec® Homopolymer Polypropylene exhibits the properties of high corrosion resistance, high temperature resistance, and great tensile strength. It maintains its stiffness at elevated temperatures and displays incredible resistance to organic solvents, degreasing agents, and electrolytic attack. In addition, the material is lightweight, and stain and moisture resistant. Due to its chemical resistance, Densetec® Homopolymer Polypropylene is ideally suited to be used with a wide range of chemicals. Its resistance to aggressive media permits it to be used in laboratories and a large variety of industrial applications. The material resists most strong acids and bases even at relatively high temperatures and concentrations.

Teldene® B07ML is used as injection molding for products requiring a good resistance to long term heat exposure such as battery cases, automotive components and large containers and automotive compounding applications.

J-360 is impact block copolymer with ethylene content as co-monomer. This grade is designed to be processed in conventional Injection molding equipment. J-360 shows good impact resistance at low temperature and has also high strength. It has broad range of property, and is used from industrial supplies to automotive compound base resin.

Moplen EP400M is the polypropylene block copolymer manufactured by PMC under the license of Lyondellbasell using the Spheripol process. Moplen EP400M is a block copolymer selected by customers for use in injection molding of parts of electrical appliances, containers, battery case.