Products in Batteries: Reinforcement

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Electrospun PVDF-HFP is an ultrafine mat of poly(vinylidene fluoride-co-hexafluoropropylene) produced by electrospinning. This product is a free standing flexible sheet with microstructural features not available from a bulk material. The fine scale of fiber diameters produces a membrane material with an inherently high surface area to volume ratio. The interconnected irregular shape pores within the fibers largely increases the pore volume (porosity) and accessible surface area.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Electrospun PAN is an ultrafine mat of polyacrylonitrile produced by electrospinning. This product is a free standing flexible sheet with microstructural features not available from a bulk material. The fine scale of fiber diameters produces a membrane material with an inherently high surface area to volume ratio. The interconnected irregular shape pores within the fibers largely increases the pore volume (porosity) and accessible surface area.

Electrospun PVA is an ultrafine mat of polyvinyl alcohol produced by electrospinning. This product is a free standing flexible sheet with microstructural features not available from a bulk material. The fine scale of fiber diameters produces a membrane material with an inherently high surface area to volume ratio. The interconnected irregular shape pores within the fibers largely increases the pore volume (porosity) and accessible surface area.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

3B Fiberglass DS 2200-13P is a 13 μm filament dia-meter, 4 mm long chopped glass fiber designed for production of Polyolefin compounds.DS 2200-13P shows outstanding compatibility with Polypropylene. This is the material of choice for very high glass content (up to 50 %wt) compound grades that require good fiber dispersion as well as mechanical properties. DS 2200-13P is also desig-ned for parts weathering in prolonged contact with water, detergents and glycol. DS 2200-13P can also be used in applications complying with strin-gent requirements of food contact and drinkable water standards EC 10/2011, FDA, BfR and ACS. DS 2200-13P is supplied on a pel-letized form and offers outstanding feeding-to-extruder behavior as well as excellent fiber impregnation.DS 2200-13P’s sizing chemistry also requires reduced amount of coupling agents so that parts reach optimum mechanical performances.

3B Fiberglass DS 3185E-10N is designed to reinforce polyester PBT resins. When molded this product exhibits excellent dry mechanical properties and good color characteristics.DS 3185E-10N can also reinforce and show excellent performances in blends with PET and flame-retardant formulations. An innovative manufacturing technology provides DS 3185E-10N chopped strand product with an excellent strand integrity and bulk density. As a result this product exhi-bits excellent feeding properties with low fuzz generation.DS 3185E-10N is also free of Nonylphenol Ethoxylates.

ZOLTEK PX35 continuous carbon fiber is manufactured from polyacrylonitrile (PAN) precursor. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user the ability to design and manufacture composite materials with greater confidence and allows for efficient and fast buildup of carbon fiber reinforced composite structures. ZOLTEK PX35 50K fibers are available with a variety of sizing formats for different composite processing methods and for compatibility with a wide range of standard resin systems. ZOLTEK quality focuses on spool to spool consistency yielding low coefficients of variation.

3B Fiberglass DS 1128-10N is designed to reinforce a broad range of polyamide resins, including PA6, PA66, PA610, PA6/66 copolymers and semi-aromatic PA.When molded this product exhibits outstanding dry mechanical proper-ties, excellent hydrolysis/glycolysis resistance, high heat aging resis-tance and no sensitivity to mold release agents commonly used, such as calcium stearate. It can also reinforce and offer excellent perfor-mances in all impact modified and flame retardant polyamide formula-tions. An innovative manufacturing technology provides DS 1128-10N chopped strand with an excellent strand integrity and bulk density. As a result this product exhibits ex-cellent feeding properties with very low fuzz generation.The product is also designed for use in pneumatic conveying system and high throughput compounding line.

3B Fiberglass DS 2200-10P is a 10 μm filament diameter, 4 mm long chopped glass fiber designed for production of high performance polyolefin compounds.DS 2200-10P shows outstanding compatibility with Polypropylene and enables improvements of material’s performances such as tensile and flexural strength, impact and creep, hence opening new design possibili-ties for lighter parts. DS 2200-10P is also designed for parts weathering in prolonged contact with water, deter-gents and glycol DS 2200-10P can also be used in applications complying with strin-gent requirements of food contact and drinkable water standards EC 10/2011, FDA, BfR and ACS. DS 2200-10P is supplied on a pel-letized form and offers outstanding feeding-to-extruder behavior as well as excellent fiber impregnation and dispersion.DS 2200-10P’s sizing chemistry also requires reduced amount of cou-pling agents to reach parts’ optimum mechanical performances.

ZOLTEK PXFB carbonized fabrics are produced from 100% ZOLTEK OX fabrics; being continuously carbonized and supplied in roll form. Continuous carbonization ensures thickness uniformity throughout the roll. ZOLTEK PXFB carbonized fabrics can be used in many applications, including stationary energy storage batteries, fire protective insulation, high temperature and chemically corrosive applications and as carbon composite materials for friction end uses. Customers can apply their own post treatments and the carbonized fabric is easy to cut and process for specific end use applications.

Jiangsu Changhai Composite Materials FIBERGLASS WET CHOPPED STRANDS 502 are produced from continuous filament strands and used as raw material of fiberglass paper and fiberglass tissue mat, it’s widely uses in building materials, petrochemistry, light industry and electrical industry, the main applications are battery separators, asphalt felts, etc.

3B Fiberglass DS 1135-10N is designed to reinforce a broad range of polyamide resins, including PA6, PA66, PA610, PA6/66 copolymers and semi-aromatic PA. The product has been developed in order to help reinforced plastics to meet the requirements of the most common food contact and drinkable water norms (FDA, EC 10/2011, BfR and ACS).Its chemistry presents an excellent compatibility with flame retardant additives and impact modifiers.The performance in hydrolysis/glycolysis resistance is also very good.Therefore, the fiber is enhancing dry-as-molded and long-term properties, in a large range of natural and colored formulations.Finally, DS1135-10N is a multi-compatible chopped strand PA, with excellent strand integrity and bulk density.

ZOLTEK PXFT carbonized felts are produced from 100% ZOLTEK OX felts, being continuously carbonized and supplied in roll form. ZOLTEK PXFT carbonized felts can be used in many applications, including: stationary energy storage batteries, fire protective insulation, high temperature furnace linings, acid gas mist eliminators and in carbon composite materials. Customers can apply their own post treatments and the carbonized felt is easy to cut and process for specific enduse applications.

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

ZOLTEK PXFB carbonized fabrics are produced from 100% ZOLTEK OX fabrics; being continuously carbonized and supplied in roll form. Continuous carbonization ensures thickness uniformity throughout the roll. ZOLTEK PXFB carbonized fabrics can be used in many applications, including stationary energy storage batteries, fire protective insulation, high temperature and chemically corrosive applications and as carbon composite materials for friction end uses. Customers can apply their own post treatments and the carbonized fabric is easy to cut and process for specific end use applications.

ZOLTEK PXFT carbonized felts are produced from 100% ZOLTEK OX felts, being continuously carbonized and supplied in roll form. ZOLTEK PXFT carbonized felts can be used in many applications, including: stationary energy storage batteries, fire protective insulation, high temperature furnace linings, acid gas mist eliminators and in carbon composite materials. Customers can apply their own post treatments and the carbonized felt is easy to cut and process for specific enduse applications.

ZOLTEK PXFT carbonized felts are produced from 100% ZOLTEK OX felts, being continuously carbonized and supplied in roll form. ZOLTEK PXFT carbonized felts can be used in many applications, including: stationary energy storage batteries, fire protective insulation, high temperature furnace linings, acid gas mist eliminators and in carbon composite materials. Customers can apply their own post treatments and the carbonized felt is easy to cut and process for specific enduse applications.

ZOLTEK PXFT carbonized felts are produced from 100% ZOLTEK OX felts, being continuously carbonized and supplied in roll form. ZOLTEK PXFT carbonized felts can be used in many applications, including: stationary energy storage batteries, fire protective insulation, high temperature furnace linings, acid gas mist eliminators and in carbon composite materials. Customers can apply their own post treatments and the carbonized felt is easy to cut and process for specific enduse applications.

ZOLTEK PXFB carbonized fabrics are produced from 100% ZOLTEK OX fabrics; being continuously carbonized and supplied in roll form. Continuous carbonization ensures thickness uniformity throughout the roll. ZOLTEK PXFB carbonized fabrics can be used in many applications, including stationary energy storage batteries, fire protective insulation, high temperature and chemically corrosive applications and as carbon composite materials for friction end uses. Customers can apply their own post treatments and the carbonized fabric is easy to cut and process for specific end use applications.

ZOLTEK PXFT carbonized felts are produced from 100% ZOLTEK OX felts, being continuously carbonized and supplied in roll form. ZOLTEK PXFT carbonized felts can be used in many applications, including: stationary energy storage batteries, fire protective insulation, high temperature furnace linings, acid gas mist eliminators and in carbon composite materials. Customers can apply their own post treatments and the carbonized felt is easy to cut and process for specific enduse applications.

ZOLTEK PXFT carbonized felts are produced from 100% ZOLTEK OX felts, being continuously carbonized and supplied in roll form. ZOLTEK PXFT carbonized felts can be used in many applications, including: stationary energy storage batteries, fire protective insulation, high temperature furnace linings, acid gas mist eliminators and in carbon composite materials. Customers can apply their own post treatments and the carbonized felt is easy to cut and process for specific enduse applications.