Products in Batteries: Good Electrical Properties

ELASTOSIL® LR 3852/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3852 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

ELASTOSIL® LR 3003/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3842/60 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3005/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3003/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3005/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3844/40 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3065/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3003/60 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3842/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3846/30 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

ELASTOSIL® LR 3003/20 TR A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3856/30 A/B is a high-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3856 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

ELASTOSIL® LR 3675/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3675 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3070 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the low compression set, there is no need to post-cure finished parts.

ELASTOSIL® LR 3072/40 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

ELASTOSIL® LR 3843/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3005/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3846/20 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.

ELASTOSIL® LR 3844/30 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3841/50 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3841 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3844/50 A/B is an oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3843 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3072/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

ELASTOSIL® LR 3003/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3005/40 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3072/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

ELASTOSIL® LR 3005/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3856/20 A/B is a high-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3856 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

ELASTOSIL® LR 3842/40 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3842/70 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3851/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3851 series. It is a paste-like, easily pigmentable, two-component product with a short curing time and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

ELASTOSIL® LR 3065/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3003/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3675/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3675 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3070 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the low compression set, there is no need to post-cure finished parts.

SABIC's Specialties Business ULTEM™ Resin 1010 is an unreinforced amorphous polyetherimide (PEI) resin that offers a high glass transition temperature (Tg) of 217°C and improved flow. Its features include excellent mechanical, electrical, and dimensional properties up to high temperatures. The material also offers very good chemical resistance for an amorphous material and is inherently flame retardant, offering UL94 V0 and 5V ratings as well as aerospace FAR 25.853 compliance. ULTEM™ Resin 1010 is RoHS compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B. Compliance for colored variants needs to be checked on a case-by-case basis. The base material is transparent amber-colored but is also available in custom colors, both transparent and opaque. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC’s NORYL NHP8000VT3 resin delivers thin-wall, non-brominated, non-chlorinated flame retardance and achieves one of the highest comparative tracking index level (CTI PLC0). Potential applications include insulation film for higher-voltage EV batteries. This resin is a non-reinforced blend of polyphenylene ether (PPE) and polystyrene (PS)that can provide outstanding heat resistance, ultra-thin-wall flame retardancy, and superior tracking resistance performance. NORYL NHP8000VT3 Resin may be evaluated in extrusion and injection molding processes. It contains a non-brominated and non-chlorinated flame retardant, ensuring adherence to many safety standards while avoiding specific halogens. NORYL NHP8000VT3 Resin has:  -   A Comparative Tracking Index (CTI) of PLC 0 (600V)  -   A UL94 flame rating of V0 at 0.25mm thickness It leverages an extraordinary technology that provides: -   High impact strength -   Heat resistance -   Dimensional stability -   Hydrolytic stability -   Electrical performance -   Low moisture absorption -   Low specific gravity. SABIC’s NORYL NHP8000VT3 resin won a bronze 2023 Edison Award in the Enhanced Performance category.

RIGIDDI-PAK R-4307A high performance, long working life potting compound for potting/encapsulating units requiring high physical strength and excellent electricals. DI-PAK R-4307 is a holds its mechanical and electrical properties while under the most severe conditions. This is due to its low water absorption, thermal shock resistance, and retention of strength at elevated temperatures.