Products in Circuit Breakers: Good Electrical Properties

Woven glass fabric, melamine resin laminate. NP509 is very hard, flame resistant, machining grade with excellent electrical properties in high humidity conditions. NP509 has high physical strength and excellent arc resistance. Meets MIL-I-24768/1 type GME, MIL-I-24768/8 type GMG and IEC 60893-3-3-MF GC 201.

NP629 is a paper-phenolic high-pressure laminate and intended primarily for mechanical applications, but is suitable for electrical applications as well. The electrical properties are not quite as good as those of NP630. Certification to IEC standard is pending.

Plenco® 02535 is a general purpose, organic filled phenolic molding compound offering optimized cure characteristics and excellent electrical properties. UL recognized under component file E40654. 02535 is available in black. 02535 was qualified under military specification MIL-M-14 (superseded by ASTM D-5948) TYPE CFG and batches can, if requested and paid for, be tested for certification to the standard.

Plenco® 08122 is a general purpose polyester bulk molding compound that is characterized by adding utility to a number of applications. Because of its combination of high heat resistance, good electrical properties, flame resistance and strength. Customers have found this material useful in such applications as iron skirts and other small appliance housings, coil bobbins, and electric motor components such as brush holders. It is available in either bulk or extruded form and is currently available in natural. Other colors are available upon request. It is UL recognized under file E40654.

Plenco® 02369 is a general purpose, organic filled phenolic molding compound, formulated to minimize the generation of free ammonia for applications that are sensitive to such formation. Plenco® 02369 offers excellent physical and electrical strength properties. UL recognized under component file E40654. 02369 is available in black.

Plenco® 01530 is a glass and mineral-reinforced pelletized polyester molding compound, offering improved mechanical strength properties along with excellent electrical properties and dimensional stability. UL recognized under component file E40654. 01530 is available in black.

Plenco® 08112 is a general purpose polyester bulk molding compound that is characterized by adding utility to a number of applications. Because of its combination of high heat resistance, good electrical properties and strength. Customers have found this material useful for such applications as iron skirts and other small appliance housings, coil bobbins, and electric motor components such as brush holders. It is available in either bulk or extruded form. Colors are available upon request. It is UL recognized under file E40654.

Plenco® 02571 is a general purpose, organic filled phenolic molding compound offering optimum cure characteristics while maintaining excellent mechanical and electrical properties. UL recognized under component file E40654. 02571 is available in black or brown color.

Plenco® 01510 is a mineral filled, pelletized polyester molding compound, which offers an excellent combination of electrical properties and dimensional stability. UL recognized under component file E40654. 01510 is available in black.

Urochem 162 Molding Compounds can be supplied in an almost unlimited range of colors from translucent light pastels to black. Hard, glossy and scratch resistant surface. Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack molded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration. Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.

Urochem Molding Compound 191 by BI-QEM is a highly refined cellulose filled urea formaldehyde resin modified with special purpose additives, pigments, cure regulators and lubricants. It provides glossy surface, high hardness, excellent scratch resistance and excellent chemical resistance. It exhibits good melt flow. It provides excellent electrical properties and resistance against surfactants & weak bases. Urochem Molding Compound 191 is designed for processing by compression molding. It is suitable for production of buttons. Its shelf life is of 6 months below 20°C. The molded products can be recycled and exhibits good UV stability with good moisture resistance.

Urochem 136 Molding Compounds can be supplied in an almost unlimited range of colors from translucent light pastels to black. Molded parts are free from odor; UV stable with good moisture resistance. Hard, glossy and scratch resistant surface. Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack molded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration. Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.

Urochem Molding Compound 136 by BI-QEM is a urea formaldehyde resin. It is filled with highly refined cellulose and modified with special purpose additives, pigments, cure regulators and lubricants. It provides excellent electrical properties and resistance against surfactants & weak bases. It offers high hardness, glossy surface, excellent scratch resistance and excellent chemical resistance. It can be processed by injection molding. Urochem Molding Compound 136 is recommended for electrical components such as sockets, lamp holders and domestic circuit breakers. Its shelf life is of 12 months below 20°C. The molded products can be recycled and exhibits good UV stability with good moisture resistance.

Urochem Molding Compound 162 by BI-QEM is a highly refined cellulose filled urea formaldehyde resin. It is modified with special purpose additives, pigments, cure regulators and lubricants. It offers high hardness, glossy surface, excellent scratch resistance and excellent chemical resistance. It exhibits low shrinkage, low water absorption and high strength. It provides excellent electrical properties and resistance against surfactants & weak bases. It can be processed by compression molding. Urochem Molding Compound 162 is recommended for electrical accessories (typically faceplates). The molded products can be recycled and exhibits good UV stability with good moisture resistance. Its shelf life is of 12 months below 20°C.

RALUPOL® UP 4806 molding compounds are characterized by excellent dimensional stability with very low processing and post-shrinkage. Due to their high rigidity and excellent heat resistance, RALUPOL® products withstand short-term heat loads. They have excellent electrical insulation and dielectric properties, which are retained even with long-term use at high temperatures. The reason for this is high tracking resistance (CTI> 600 V), arc resistance, glow wire test (GWFI 960 ° C) and a high electrical RTI (relative temperature index) of 170 ° C according to UL 746 (IEC 60216 / T1).

Urochem Molding Compound 371 by BI-QEM is a urea formaldehyde resin reinforced with highly refined cellulose and modified with special purpose additives, pigments, cure regulators and lubricants. It exhibits high apparent density and very good melt-flow. It provides glossy surface, high hardness, excellent scratch resistance and excellent chemical resistance. It provides excellent electrical properties and resistance against surfactants & weak bases. Urochem Molding Compound 371 is designed for processing by compression molding. It is suitable for electrical accessories, sanitary products, caps and closures. The molded products can be recycled and exhibits good UV stability with good moisture resistance. Its shelf life is of 6 months below 20°C.

Voltoid® D-800 is a resin-bonded cellulose fiber composite material. The D-800 series of products are specially formulated to provide consistent electrical and mechanical performance under conditions of variable ambient humidity and/or moisture. D-800 is recognized by Underwriters Laboratories for continuous use as an electrical and mechanical barrier to 105˚C. It is easily fabricated by being punched and blanked.

Urochem 161 Molding Compounds can be supplied in an almost unlimited range of colors from translucent light pastels to black. Molded parts are free from odor; UV stable with good moisture resistance. Hard, glossy and scratch resistant surface. Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack molded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration. Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.

Urochem Molding Compound 171 by BI-QEM is a urea formaldehyde resin reinforced with highly refined cellulose. It is modified with special purpose additives, pigments, cure regulators and lubricants. It exhibits good melt flow. It provides high hardness, glossy surface, excellent scratch resistance and excellent chemical resistance. It provides excellent electrical properties and resistance against surfactants & weak bases. It is suitable for processing by compression molding. Urochem Molding Compound 171 is recommended for electrical accessories, sanitary products, caps and closures. The molded products can be recycled and exhibits good UV stability with good moisture resistance. Its shelf life is of 12 months below 20°C

Urochem Molding Compound 161 by BI-QEM is a highly refined cellulose reinforced urea formaldehyde resin. It is modified with special purpose additives, pigments, cure regulators and lubricants. It exhibits low shrinkage, low water absorption and high strength. It offers high hardness, glossy surface, excellent scratch resistance and excellent chemical resistance. It provides excellent electrical properties and resistance against surfactants & weak bases. It is designed for processing by compression molding. Urochem Molding Compound 161 is suitable for circuit breakers and electrical accessories. Its shelf life is of 12 months below 20°C. The molded products can be recycled and exhibits good UV stability with good moisture resistance.

Urochem Molding Compound 134 by BI-QEM is a urea formaldehyde resin with melamine resin. It is filled with cellulose and modified with special purpose additives, pigments, cure regulators and lubricants. It offers high hardness, glossy surface, excellent scratch resistance and excellent chemical resistance. It provides excellent electrical properties and resistance against surfactants & weak bases. It is designed for processing by injection molding. The molded products can be recycled and exhibits good UV stability with good moisture resistance. Urochem Molding Compound 134 is recommended for electrical components such as sockets, lamp holders, and domestic circuit breakers. Its shelf life is of 12 months below 20°C.

Urochem 134 Molding Compounds can be supplied in an almost unlimited range of colors from translucent light pastels to black. Molded parts are free from odor; UV stable with good moisture resistance. Hard, glossy and scratch resistant surface. Excellent chemical resistance. Fats, oils and common organic solvents like alcohol and acetone do not attack molded parts which are also resistant to surfactants and weak bases. They will withstand attack from weak acids for a shorter duration. Excellent electrical properties (arc quenching, tracking, flame resistance). Oxygen index of 30% is achieved without the use of external flame retardants. No halogens are present in the composition.