Products in Parts & Components

DYNOL® 604 is a high-performance, non-ionic organic superwetter known for its excellent equilibrium and dynamic surface tension reduction, a hallmark of the Dynol brand. It exhibits lower foam and dynamic surface tension values compared to the more hydrophilic DYNOL® 607 surfactant. Moreover, comparative wetting performance tests have demonstrated that DYNOL® 604 Surfactant serves as an excellent alternative to conventional fluorosurfactants and offers a cost-effective solution in place of new fluorosurfactant technology.

DABCO® Crystalline is a high-purity triethylenediamine (TEDA), serving as a powerful catalyst for urethane (polyol-isocyanate) reactions. It finds application in a variety of polyurethane applications. DABCO® Crystalline is used in all types of polyurethane foams, including flexible slabstock, flexible molded, rigid, semi-flexible, and elastomeric. Additionally, it is utilized in polyurethane coating applications. The main function of DABCO® Crystalline is to accelerate the reactions between isocyanate and water, as well as between isocyanate and organic hydroxyl groups.

VESTAMID® NRG 3001 NC is a polyamide 12 compound specifically developed for the manufacturing of hydrocarbon transport piping systems and liners. This material offers easy processing and excellent dimensional control during pipe extrusion, particularly for large diameter pipes. VESTAMID® NRG 3001 demonstrates exceptional compatibility with hydrocarbons such as crude oil, as well as oilfield chemicals like paraffin inhibitors. As a result, it delivers high dimensional stability and maintains unaffected properties for parts in contact with these substances. Experience the reliability and performance of VESTAMID® NRG 3001 in your hydrocarbon transport applications. Choose VESTAMID® NRG 3001 for its superior properties, easy processing, and excellent dimensional control, ensuring optimal performance and durability in your piping systems and liners.

VESTAMID® NRG 2901 BK is a high-viscosity, heat-stabilized compound with exceptional mold release properties. It is nucleated to reduce cycle time and shrinkage of molded parts. It is commonly used for gas pipes and fittings, with a proven record of safe and reliable performance in demanding applications, including fuel lines in passenger cars, air brake tubing in trucks, and offshore applications.

Evonik VQM 909 formulations consist of vinylfunctional QM resin and vinylfunctional silicone polymers. These formulas are used to produce materials that are transparent, free of fillers, and have great mechanical qualities. They can also improve the mechanical properties and flow behavior of systems that are filled.

Evonik Polymer VS 10000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik Polymer OH 2 is a polydimethyl siloxane with terminal silanol groups, serving as a fundamental component in the formulation of condensation-curing silicone elastomers. This product is offered in a range of viscosity levels, spanning from 100 to 400,000 mPas. In its physical form, it appears clear and colorless. Chemically, it is characterized as hydroxy-terminated polydimethyl siloxanes.

VESTAMID® eCO LX9039 BBM100 is a unique polyamide 12 product offered by Evonik. It is an unmodified polyamide 12 with medium viscosity and does not contain any stabilizers or processing aids. This specific formulation is typically utilized in special circumstances where the absence of additives is desired or the presence of processing aids could cause interference. The "eCO" in its name reflects Evonik's commitment to reducing CO2 emissions by utilizing renewable or circular feedstocks through a mass-balance approach. VESTAMID® eCO LX9039 BBM100 provides a reliable solution for applications requiring a pure polyamide 12 material without any additional additives, catering to specific requirements in various industries.

VESTAMID® L2123 BK 9.7507 is a plasticized and high-viscosity polyamide 12 compound designed for the extrusion of flexible tubing and hoses, particularly in the automotive industry. This compound complies with DIN 73 378, Type: PA 12-PHL, for tubing. Thanks to its low moisture absorption, compounds based on PA 12 demonstrate minimal variation in properties with changing humidity. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. VESTAMID® L2123 BK 9.7507 features a high melt viscosity, optimized cold temperature impact resistance, and precise dimensional control during pipe extrusion. Supplied as cylindrical granules in moisture-proof bags, they are ready for seamless processing. Choose VESTAMID® L2123 BK 9.7507 for its reliability, high-viscosity performance, and excellent properties in your flexible tubing and hose extrusion applications.

ALBIDUR® EP 5340 A is a concentrated dispersion, containing 40% high-performance elastomer within a cycloaliphatic epoxy resin (EEC). This product plays a vital role as a toughness modifier, particularly suited for rigid and brittle epoxy resin systems. The elastomeric component consists of a specialized silicone rubber, intricately distributed within the liquid resin as an extremely finely dispersed second phase.

VESTAMID® NRG 5901 BK is a high-molecular-weight PA-12 material developed by Evonik. This exceptional material offers superior performance characteristics, making it an ideal choice for expanding the use of thermoplastic piping systems. With its ability to handle higher operating pressures and larger diameters, VESTAMID® NRG 5901 BK provides a safe and cost-effective alternative to metallic piping systems. In addition to extending the operating pressure limits of thermoplastic piping systems, it offers numerous benefits and, in many cases, outperforms conventional PE piping systems. Experience the reliability, durability, and enhanced performance of VESTAMID® NRG 5901 BK in your piping applications. Choose VESTAMID® NRG 5901 BK for its superior properties and cost-effective solution, ensuring the safe and efficient operation of your thermoplastic piping systems.

DABCO® DC 1 is designed to delay the initiation of the reaction while ensuring a robust curing process by enhancing the urethane (polyol-isocyanate) reaction in various flexible molded polyurethane foams, making it particularly suitable for NVH applications. It is a suitable option for applications that demand lower or no emissions from amines.

VESTAMID® NRG 2101 YE is a high-molecular-grade PA-12 material developed by Evonik. It is designed for use in thermoplastic piping systems at higher operating pressures and larger diameters, replacing metallic piping systems in a safe and cost-effective manner. It offers superior performance characteristics.

DABCO® T 120 is a potent catalyst used for urethane reactions (gelling), offering excellent hydrolytic stability on the resin side. It is a dibutyl tin-based catalyst that displays high catalytic activity and enhanced hydrolytic stability. This catalyst finds application in spray foam, rigid polyurethanes, and high-resiliency flexible molded products.

VESTAMID® X7167 NC is a high-quality polyamide 12 (PA12) compound formulated for exceptional heat stability and flame retardancy. This compound incorporates a non-migrating flame retardant that is free of halogens and phosphorous, making it an ideal choice for interior parts in aircraft, railways, and ships. VESTAMID® X7167 NC meets the stringent requirements of FAR 25.853 or ABD 0031, ensuring compliance and safety in these demanding applications. This versatile resin can be processed through extrusion or injection molding methods. However, it is important to note that the melt temperature should not exceed 260 °C to maintain the effectiveness of the flame retardant. We recommend melt temperatures within the range of 210–230 °C for optimal performance. VESTAMID® X7167 NC is conveniently supplied as cylindrical pellets, packaged in moisture-proof bags, ready for immediate use. Trust VESTAMID® X7167 NC for reliable and flame-resistant solutions in interior component manufacturing.

VESTAMID® NRG 1001 is a high-viscosity, plasticized, and impact-modified PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. It offers easy processing and good dimensional control during pipe extrusion, especially for large pipe diameters.

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound specifically developed for the pore-free extrusion coating of steel tubing. It stands out from commonly used conductive extrusion compounds due to its significantly lower melt viscosity and outstanding extrusion characteristics, even in very thin coatings.

POLYCAT® SA 102 is a heat-activated catalyst that offers excellent front-end delay, activated at a thermo-activation temperature of approximately 60 °C (140°F). This catalyst is specifically recommended for artificial turf applications. It belongs to the category of blocked amine catalysts, which are known for their ability to provide delayed reaction profiles.

Evonik Polymer VS 500 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

VESTAMID® L1670 is a low-viscosity polyamide 12 compound that has been specifically developed with heat and light stabilization for the extrusion of thin wire insulations and cable jacketings. Coatings made from VESTAMID® L1670 demonstrate a low coefficient of friction, which greatly facilitates the process of laying cables. This compound is well-suited for profile extrusion and wire and cable extrusion processing techniques.

VESTAMID® X7393 NC is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound used for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 NC exhibit optimized cold temperature impact resistance and increased burst pressure resistance in the extrusion of semi-rigid tubing. Additionally, it offers an exceptional low coefficient of friction and good chemical resistance.

VESTAMID® L2124 BK 9.7507 is a plasticized polyamide 12 compound specially formulated for the extrusion of flexible tubing and hoses in oil and petrochemical applications. This heat- and light-stabilized compound complies with DIN 73-378, Type: PA 12-PHL, for tubing. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured with exceptional impact strength, a low coefficient of friction, and good chemical resistance, parts made from VESTAMID® L2124 BK 9.7507 exhibit outstanding performance. With its high melt viscosity and precise dimensional control during pipe extrusion, this semi-crystalline material provides reliability and ease of processing. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® L2124 BK 9.7507 is ready for seamless integration into your production process.

VESTAMID® L1930 BK 9.7503 is a heat-stabilized PA 12 compound reinforced with 30% milled glass fibers. It is suitable for injection molding applications. The reinforcement provides high strength and rigidity to the moldings. Due to the low water absorption of PA 12, parts made from this compound exhibit good dimensional stability and maintain mechanical properties even with changing ambient humidity.

TEGO® Surten 219 E surfactant is 100% active Gemini wetting agent technology for use in a wide range of aqueous applications. TEGO® Surten 219 E surfactant shows excellent dynamic surface tension reduction with low foam tendency. TEGO® Surten 219 E surfactant is easy-to handle liquid that contains no added alkylphenol ethoxylates (APEs).

Evonik Polymer VS 165000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

VESTAMID® LX9008 BK 9.7504 is a plasticizer-free polyamide 12 compound renowned for its exceptional long-term resistance under thermal load. This compound is specifically designed for the production of flexible tubes exposed to higher temperatures, making it ideal for applications in the engine compartment of motor vehicles. When utilized as diesel fuel lines, VESTAMID® LX9008 BK 9.7504 demonstrates significant advantages over standard grades, as evident in storage tests with diesel fuel. With low moisture absorption, this material maintains the dimensions and properties of finished parts even in changing ambient conditions. However, when using VESTAMID® LX9008 BK 9.7504 for fuel lines, certain prerequisites must be considered. Experience the outstanding long-term thermal resistance and reliability of VESTAMID® LX9008 BK 9.7504 for your demanding applications.

VESTAMID® MLT 7440 is an automotive industry-proven 5-layer tube specifically designed for fuel handling systems. This system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. With excellent resistance properties against alcohol-containing fuels, the MLT 7400 offers superior chemical resistance on the inner tube surface and a close-to-zero extraction level. In certain regions, antistatic properties may be required, which are fulfilled by the multilayer tubing system (MLT) 7440. Based on the same design, the MLT 7440 incorporates a conductive fluoropolymer EFEP NEOFLONTM inner layer. Experience the reliability and exceptional performance of the multilayer tubing systems (MLT) 7400 and (MLT) 7440 in fuel handling systems, ensuring superior fuel resistance and meeting the specific requirements of your automotive applications.

POLYCAT® SA 2 LE is a low-emissive, delayed-action tertiary amine based on DBU. It effectively enhances the urethane reaction when heat is applied, making it suitable for microcellular, integral skin, coating, adhesive, sealant, and elastomer applications. This product is especially recommended for use with low-activity aliphatic isocyanates.

DABCO® T 12 (dibutyltin dilaurate, DBTDL) is a catalyst that enhances the urethane (polyol-isocyanate) reaction in the manufacturing of flexible and rigid polyurethane foams, coatings, adhesives, and sealants. It promotes rapid gel and tack-free times, contributing to improved mechanical properties in molded and slabstock foams.

POLYCAT® SA 8 is a tertiary amine utilized to enhance the urethane reaction either through heat activation or when combined with co-catalysts at ambient temperature. This product finds application in coatings, adhesives, sealants, elastomers, and composites. By using formulations containing POLYCAT® SA 8, it is possible to achieve an extended pot life comparable to that of mercury catalysts.

Evonik Crosslinker 120, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.

Evonik Crosslinker 100, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.

VESTAMID® MLT 4300 is an established 4-layer tube for automotive fuel handling systems. It is a multilayer tubing system with an outer layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). VESTAMID® MLT 4300 offers excellent permeation resistance against ethanol-containing fuels and good cold impact performance.

VESTAMID® L1723 BK 9.7624 is a low-viscosity, plasticized PA12 resin suitable for injection molding. It has been developed specifically for the production of strip clips and cable ties. The parts made from this resin maintain their dimensions in environments with varying humidity levels while possessing high tenacity, a low coefficient of friction, and good chemical resistance.

Evonik Modifier 705 refers to SiH-terminated polydimethyl siloxanes utilized as plasticizers in addition-curing silicones. Due to their difunctional structure, these products do not crosslink but extend the chains of vinyl-terminated silicone polymers (Polymer VS). The use of these modifiers reduces crosslinking density and, consequently, the elastomer's hardness.

KOSMOS® MB 10 is a strong gel catalyst for polyether-based systems, utilizing a combination of tin and bismuth. It facilitates a robust gelling reaction. It is sensitive to moisture and requires the correct handling during storage and production to maintain high performance.