Products in Parts & Components: Acrylics & Acrylates

Mactac CleanTape LV820 Low VOC Acrylic Double Coated Tape 72# White PCK CB4180-72 consists of a.5mil PET carrier coated on both sides with 1.2 mils of clean, aggressive acrylic pressure sensitive adhesive. The adhesive is protected by either a two-side silicone coated 80# natural polycoated Kraft liner or a 72# White polycoated liner. This product is designed for applications that benefit from a clean, chemically inert adhesive tape.

Goonvean Fibers TEC03CON315 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Mactac CleanTape Double Coated Tape 1.2 mil Low VOC Permanent Acrylic CB4190-2PET consists of a .5mil PET carrier coated on both sides with 1.2 mils of clean, high shear acrylic adhesive with moderate peel and tack. The adhesive is protected by two 2.0 mil clear PET liners. This product is designed for applications that benefit from a clean, chemically inert adhesive tape.

Goonvean Fibers TEC03CON404 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

MPD Industries UVP 0202 99 is a Di functional monomers, which polymerize when expose to sources of free radicals. It is compatible with a wide range of acrylated resins. It is low odor and good flexible monomer. It is a fast curing monomer with low valatility & a hydrophobic backbone.

Mactac CleanTape LV820 3.0 mil Transfer Adhesive 80# Natural PCK CF4083-80 is a 3-mil thick film of clean, aggressive acrylic pressure sensitive adhesive. The adhesive is protected by either a two-side silicone coated 80# natural polycoated Kraft liner.

Goonvean Fibers TEC03CON313 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

DuploCOLL® 103 HCR is an high temperature and chemical resistant sealing tapes.

Ultra-Illumina™ 3511 is a UV light curable conformal coating made entirely of solids that is used on PCB assembly. It does not clog valves and is intended for use in high volume spray systems. When fully cured, Incure 3511 forms a glossy, hard, and resilient protective coating with a thickness of up to 5mm that acts as a moisture barrier even at high altitudes. Because of the fluorescing properties, quick in-process and quality inspection of coating coverage is possible. Secondary heat-cure is used to cure shadowed areas under components. UL 746C compliant, rated indoor/outdoor to 120°C, and flame class 94V-0.

CMC Klebetechnik CMC 70097 is a temperature-resistant double-sided adhesive tape with a high-adhesion, temperature-resistant pure acrylic adhesive on both sides. These adhesives are distinguished by their aging resistance and chemical resistance.

UVP 0302, Ethoxylated(3) Trimethylol propane triacrylate (Etho .TMPTA) is a low viscosity liquid monomer with fast cure response and low volatility during free radical polymerization.It has a low skin irritancy.

UVP 0303, Di-­Trimethylol propane tetracrylate (DiTMPTA) is a liquid monomer with fast cure response and low volatility during free radical polymerization.It has a low skin irritancy and high cross density upon curing.

Mactac CleanTape LV820 Low VOC Acrylic Double Coated Tape 72# White PCK CB4182-72 consists of a.5mil PET carrier coated on both sides with 2.4 mils of clean, aggressive acrylic pressure sensitive adhesive. The adhesive is protected by either at two-side silicone coated 80# natural polycoated Kraft liner or a 72# White polycoated liner. This product is designed for applications that benefit from a clean, chemically inert adhesive tape.

Foreverest Resources Acrylic Acid Modified Rosin AR120240 is reaction products with acrylic acid. Acrylic Acid Modified Rosin is a derivative from additive reaction of gum rosin with acrylic acid.

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

PPI SP-139 is based on a silicone free adhesive, PPI SP-139 is suitable for masking and surface protection applications. For example, the protection of metal plates or PC boards during storage or transportation. It can be cleanly removed from any surface without adhesive residue. It has been approved for several niche applications, for example, as a powder coat masking tape for bus-bars used in transformer manufacture. It resists temperatures up to 180°C (356°F), short term.

UVP 0204, Neo-­Pentyl Glycol diacrylate (NPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It has good chemical resistence and high reactivity .It is compatible with a wide range of acrylated resins.

bossin® W-05 is a hydrophilic but insoluble in water. It has excellent properties like curing faster, improve the adhesion of metal and plastic. It has an acid value which is higher than B-02.

Noxtat SDB™ acrylic sheets are coated with a transparent metal/plastic material that will permanently prevent formation of static electricity on the surface. The surface has excellent mar and abrasion resistance, resistance to charge generation, and superior static decay characteristics and cannot be tribocharged. The product displays excellent control of both electrostatic discharge (ESD) and particulate attraction. Their permanent characteristics are not affected by humidity. They are intended for use in fabricated parts as well as panels. They are flexible for heat bending and is clear and hard for panel applications.

Mactac CleanTape LV820 Low VOC Acrylic Double Coated Tape 72# White PCK CB4181-72 consists of a.5mil PET carrier coated on both sides with 1.8 mils of clean, aggressive acrylic pressure sensitive adhesive. The adhesive is protected by either a two-side silicone coated 80# natural polycoated Kraft liner or a 72# White polycoated liner. This product is designed for applications that benefit from a clean, chemically inert adhesive tape.

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

UVP 0205, Di Propylene glycol diacrylate (DPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is an excellent low viscosity economical diluent .It is compatible with a wide range of acrylated resins.

Goonvean Fibers TEC03CON406 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

CMC Klebetechnik CMC 80808 is a smooth double-sided adhesive tape reinforced with non-woven fibers. Very good initial tack, even on slightly rough surfaces, provides good all-around performance.

BONDEX® 9706 is very stiff binder used for manufacturing of battery gauntlet. It imparts stiffness and used for preparation of gauntlet for battery separator. It imparts excellent acid resistance and oxidation resistance.

Ultra-Illumina™ 3502 is a UL-compliant, 100% solids UV light curable conformal coating for PCB assembly. It is suitable for use in high-volume spray systems, does not clog valves due to the absence of volatiles, and is environmentally friendly. When fully cured, Incure 3502 forms a hard and resilient protective coating with a thickness of 30 to 150 microns that functions as a moisture barrier with excellent adhesion in harsh environments. The presence of permanent fluorescence allows for quick in-process and quality inspection of coating coverage. Moisture-curing coated components in shadowed areas take 72 hours.

UVP 0301 is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy,

TECHSPRAY Turbo-Coat Acrylic Conformal Coating is intended to increase board production throughput without the need for costly UV systems or other capital equipment. Conformal coating cure time is frequently regarded as a bottleneck in PCB assembly operations. TurboCoat dries tack-free in 3 minutes, allowing manufacturers to handle boards in a third of the time that the leading acrylic coating takes! With elevated temperatures, full cure can be achieved in as little as 10 minutes.

Goonvean Fibers TEC03CON487 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Noxtat SDG™ acrylic sheets are coated with a transparent metal/plastic material that will permanently prevent formation of static electricity on the surface. The surface has excellent mar and abrasion resistance, resistance to charge generation, and superior static decay characteristics and cannot be tribocharged. The product displays excellent control of both electrostatic discharge (ESD) and particulate attraction. Their permanent characteristics are not affected by humidity. They are intended for use in fabricated parts as well as panels. It is flexible for heat bending and is clear and hard for panel applications

AT300 Flock Tow is a high modulus fiber developed for reinforcements in wide variety of industrial applications such as lead acid battery plates, adhesives, epoxy resins, brake pads and clutch disks.

Techspray's AR Acrylic Conformal Coating is Fine-L-Kote AR Acrylic Conformal Coating. Acrylic Conformal Coating is a low-cost conformal coating for PCB protection. Fine-L-Kote AR is HAPs (Hazardous Air Pollutants) free, which means it does not contain common coating solvents such as Toluene, Xylene, and MEK. This improves the usability and safety of the coating.

CMC Klebetechnik CMC 12096 is a double-sided adhesive tape with a PET film substrate that is stabilized. The highly snear resistant adhesive performs well in UV exposure, high temperatures, chemical resistance, and humidity. Excellent permanent adhesive strength on a variety of surfaces, including those with low surface energy. A thicker material allows for better adhesion to rough or structured surfaces.

Goonvean Fibers TEC03CON408 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Mactac CleanTape LV820 3.0 mil Transfer Adhesive 72# White PCK CF4083-72 is a a 3-mil thick film of clean, aggressive acrylic pressure sensitive adhesive. The adhesive is protected by either a two-side silicone coated 80# natural polycoated Kraft liner or a 72# White polycoated liner. This product is designed for applications that benefit from a clean, chemically inert adhesive tape.

Goonvean Fibers TEC03CON311 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.