Products in Parts & Components: Phenols & Phenolics

Resinoid 2002-C5 is a fabric reinforced, two-step phenolic molding compound. It has improved heat distortion and dimensional stability. It has been formulated to exhibit excellent wear resistant properties. It is available in bulk form and is recommended for compression or transfer molding.

Shandong Huijin Chemical HJT-31B epoxy resin curing agent is reacted from the phenolic resin modified ethylene diamine, according to customer's different requirements, we add different agent to our product, so that our products will be more suitable for domestic and abroad market.

Lamitex® XX PF CP 23 paper/phenolic laminated sheet and tubes offer high dielectric and very good mechanical strengths. Grade XX laminate and tubing are frequently specified for use in transformers, switchboards, mounting blocks, insulating panels, washers and spacers, and switchgear applications.

Fudow Company F5750F is a glass fiber.

Resinoid 2215 is an organic fiber reinforced compound offering moderate impact strength. This product is available in a small pellet suitable for compression, transfer and injection molding.

Inbord® M is a Phenole/melamine laminate having a tracking resistant decorative surface. INBORD® M is generally a mechanical grade and for lower electrical requirements (low voltage applications up to 1000 volts). The core meets PF CP 201 according IEC 60893 and Hp 2061 according DIN 7735. Thickness of the melamine laminate 0,1 mm. The temperature Index is E (120°C).

VOLTIS® Hp TU 21 (PF CP 21) is a Round rolled phenolic paper laminate tube for mechanical and electrical applications.

Resinoid 1345 is a glass reinforced, two-step phenolic molding compound. It was specifically developed for molded electric motor commutators where performance for prolonged periods at elevated temperatures while under centrifugal loads is critical.This material comes in pelletized from and is suitable for injection, transfer or compression molding.

Fudow Company F5770F is glass fiber.

Fudow Company F5800F is a Organic filler.

Atlas Fiber Grade XX Phenolic Sheet is a paper and resin based phenolic suitable for general purpose electrical applications. XX is the mechanical grade paper phenolic. Grade XX machines well and is easily used in punch part applications. Grade XX like all paper based phenolic is noted for it's smooth texture.

Resinoid 1528 is a glass and mineral reinforced, two-step phenolic molding compound offering good mechanical properties. This product has been specifically formulated for use in automotive applications. This material comes in pelletized form and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment

Fudow Company F900 is an organic filler.

Shandong Huijin Chemical HJT-31D epoxy resin curing agent is reacted from the phenolic resin modified ethylene diamine, according to customer's different requirements, we add different agent to our product, so that our products will be more suitable for domestic and abroad market.

Maverick Corporation MVK-7000 is a vinyl phenolic resin developed for use in bearing liner applications. With a lower cost than Maverick’s polyimide products, MVK-7000 provides an economical alternative for bearing applications with lower service temperature requirements. MVK-7000 is available as a solution from Maverick Corporation.

VOLTIS® Hgw TU 22 (PF CC 22) is a Round rolled phenolic cotton fabric laminate tube with high toughness for mechanical applications.

Fudow Company F5626F is a glass fiber.

Resinoid 1550 is a milled glass and mineral reinforced, two-step phenolic molding compound offering good mechanical properties. This product has been specifically formulated at a 2.47 specific gravity. This material comes in pelletized form and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment.

Fudow Company F5802F is organic filler.

Lamitex® X PF CP 21 paper/phenolic laminated sheet is primarily intended for mechanical applications. It has high relative mechanical properties but low electrical characteristics when compared to XX and XXX type materials. Special precautions must be taken to prevent cracking if the material is to be tapped or machined parallel to the laminations. Grade X laminate is frequently specified for use as mounting blocks or panels, washers and spacers.

Acculam™ Phenolkraft Paper X/XX comprised of a phenolic resin binder and a saturating kraft (paper) substrate. It qualifies to NEMA X/XX and MIL-I-24768/11/12.This is a general purpose grade with good mechanical and electrical insulating properties. Its versatility, good machining characteristics and lower cost encourage its applications as switch plates, barriers, terminal strips, washers and other electrical components.

Fudow Company F5650Fis a glass fiber.

Atlas Fiber Grade XXX Phenolic Rod is a paper base phenolic laminate with good mechanical properties, high dielectric strength, and good resistance to moisture. Grade XXX is our most economically priced grade and is recommended for most mechanical applications, for use at radio frequencies, and in high humidity situations. Grade XXX is the electrical grade paper phenolic.

VOLTIS® Hgw 2083 (PF CC 203) is a Viscoplastic material for mechanical application and finely machined parts.

Resinoid 1371 is a glass reinforced, two-step phenolic molding compound offering good mechanical and electrical properties. This product has been specifically formulated for applications requiring prolonged exposure to elevated temperatures andresistance to thermal shocks.This material comes in pelletized from and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment.

Resinoid 2089 is a chopped fabric reinforced, two-step phenolic molding compound offering good physical and wear properties. This product has been specifically formulated for mechanical applications where minimal wear and low shrinkage values are desired. This material comes in bulk fabric form and is suitable for compression molding.

VOLTIS® Hp 2061.5 (PF CP 202) is a High electric strength in oil, used in high voltage range at power frequencies.

Von Roll Isola AR 600 P 01 is composed of epoxy resin and aramid fabric reinforcement.

Lamitex® G-3 PF GC 21 glass/phenolic laminated sheet is most frequently preferred for application that require high flexural and impact strengths and good electrical properties under low relative humidity conditions. . Lamitex G-3 meets or exceeds NEMA G-3, Mil-I-24768/18 specifications and meets UL 94-HB requirements.

Resinoid 2277 is a chopped fabric reinforced, two-step phenolic molding compound. It was specifically developed for molding applications where a lightweight, high strength material with good impact strength is needed. This material comes in pelletized from and is suitable for transfer or compression molding and can be used in injection molding systems with deep flight screws. Resinoid 2277 meets the requirements of ASTM D-5948 CFI-20 (Formerly MIL M14/1 CFI-20).

Current Incorporated LAMINATED SHEET NEMA Linen Electrical Grade (LE) MIL-I-24768/13 is used when electrical applications require good moisture and acid resistance, best for machined parts with smooth edges, is similar to L It has good dielectric properties and a low dielectric loss.

Durez™ SUMIKON PM-9501 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durez™ SUMIKON PM-9501 is certified as UL Flame Rated. It is available in Granules form.

Lamitex® LE PF CC 21 cotton/phenolic sheets are intended for use in electrical applications requiring good moisture resistance. It has lower mechanical strength than materials with glass substrates, but has superior impact resistance when compared to paper based laminates. LE possesses good dielectric properties and medium dielectric loss and can be machined to relatively close tolerances.

Current Incorporated LAMINATED SHEET NEMA XX MIL-I-24768/11 is made of cellulosic paper and a phenolic resin binder. Normal electrical applications are suitable. It is not suitable for punching. Machined with standard machine tools.

Resinoid 1365 is a glass reinforced, two-step phenolic molding compound offering excellent mechanical strength as well as good electrical and thermal characteristics. This material is offered as a moderate size pellet suitable for compression and transfer molding. It can be used in injection molding systems with deep flight screws.

Shandong Huijin Chemical HJT-31A epoxy resin curing agent is reacted from the phenolic resin modified ethylene diamine, according to customer's different requirements, we add different agent to our product, so that our products will be more suitable for domestic and abroad market.