Products in Parts & Components: Polyether Ether Ketone (PEEK)

Semi-crystalline high-performance plastic with very good sliding properties and very good mechanical Properties even under thermal stress. In addition, PEEK is characterized by a excellent chemical resistance.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PO DP117/X2 is a thermally conductive polyetheretherketone, offering excellent chemical resistance, good stiffness and high HDT. It should be used in demanding applications where thermal management must be accomplished in harsh environments.

Pfluon Chemical 8100FP is a resin fine powder with diameter 50um,standard viscosity and capable for pressing mold,compound modication etc. It appears in white color.

Pfluon Chemical 8800G is a pure resin particle,hypocrystalline,standard viscosity and capable for plastic forming process like injection,squeeze etc. It appears in beige color.

PEEK sheet (polyether ether ketone) is an extremely tough, wear resistant plastic with excellent resistance to high temperatures and energy radiation. It is very dimensionally stable plastic and has a high mechanical bearing strength. PEEK plastic sheet also offers excellent chemical resistance and a high resistance to hydrolysis, even against super-heated steam.It is also electrically insulating and has good sliding properties. It is easy to machine and is FDA approved for use with food.

OpteSTAT™ master batches are Ovation Polymers' line of nano-compounds based on carbon nanotubes. Our proprietary dispersion technology debundles and disentangles carbon nanotubes without compromising their integrity. OpteSTAT™ compounds exhibit good conductivity at minimal nanotube loadings, achieving exceptional cleanliness and physical property retention.OpteSTAT™ NC PK 8010 is PEEK-based carbon nanotube compound. The material resistivity can be tailored to the application, while retaining the physical and thermal properties of the base polymer.Target applications include components of disk drives, business machines or other electronic assemblies where ESD control is required while retaining exceptional cleanliness, dimensional control and physical properties.

VICTREX® 450G is a high performance material that exhibits high strength and heat resistant properties. Glass-filled grades provide improved rigidity and dimensional stability.

Pfluon Chemical 8100G is a pure resin particle,hypocrystalline,standard viscosity and capable for plastic forming process like injection,squeeze etc. It appears in beige color.

PolyClean Technologies PEEK 150G-MP140 is milled from PEEK 150G natural polymer. Powders have been sifted through 140 mesh sieve, yielding a particle size distribution ranging from ~40 to ~106 microns.

Pfluon Chemical 8200FC30 is a abrasion reinforced Wear resistant particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

fluteck™ K303 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

PBY Plastics PB30201R is a compression molded 30% carbon fiber filled PolyEtherEtherKetone (PEEK).

Nylacast Peek is a high performance engineering thermoplastic. It is very strong and rigid. The characteristics of PEEK show that it has the highest tensile strength in the plastics family. It can be used on a continuous basis in temperatures of 480°F (250°C) without any loss of its properties.

Pfluon Chemical 8100P is a coarse powder with diameter 500um,standard viscosity and capable for plastic injection, squeeze,compound modification etc. It appears in white color.

GEHR PEEK® 30CF is a variant of PEEK modified with 30 % carbon fibers. As with the glass-fiber reinforced type, the surface hardness and heat deflection temperature are also significantly increased compared to the already high values of the unreinforced standard type. This material owes its significantly increased dimensional stability to its extremely low coefficient of linear expansion. The electrical properties are influenced by the high proportion of carbon fibers and must be taken into account in the relevant applications.

fluteck™ K304 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

VICTREX® 450G903 is a high performance material that exhibits high strength and heat resistant properties. Glass-filled grades provide improved rigidity and dimensional stability.

fluteck™ K301 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK)

PEEK™ Tubing is a linear semi-crystalline aromatic polymer, is considered the highest performing thermoplastic material due to its ability to withstand extreme temperatures, high pressure, and caustic fluids. Now Zeus has taken PEEK to an entirely new level of performance with the introduction of PEEKshrink™ – PEEK heat-shrinkable tubing.

VICTREX® 450FC30 is a high performance material that exhibits high strength and heat resistant properties. Glass-filled grades provide improved rigidity and dimensional stability.

GEHR PEEK® HT is one of our contributions to innovation is to extrude the new SOLVAY PEEK-HT material, which may be used in particular in the chemical industry. With PEEK-HT, Solvay developed a new material which has a glass transition temperature (170 °C) and heat deflection temperature (HDT/A=175 °C) that are both approx. 20 °C higher that those of PEEK, without losing its high chemical resistance. This is usually the case with the materials from the same material family, such as PEK, PEKK or PEKEKK. The melting point of PEEK-HT is approx. 385 °C. At the same time, it was possible to significantly increase the dielectric strength from 16 to 23 kV/mm. The raw material manufacturer now specifies a compressive strength of 160 MPa compared to the former value of 118 MPa. The notched impact strength, measured according to ASTM D256, is also specified with an increased value of 106 J/m compared to 91 J/m for standard PEEK.

GEHR PEEK® MOD (GLIDE) is reinforced with 10 % of each PTFE, graphite and carbonfibre. The very good friction, wear and tear properties makes this material the good choice for many applications with friction.

Pfluon Chemical 9000UFP is a resin Ultrafine powder with diameter 20um,standard viscosity and capable for pressing mold,compound modification etc. It appears in white color.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PA DP117/X3 is a thermally conductive polyetheretherketone, offering excellent chemical resistance, good stiffness and high HDT. It should be used in demanding applications where thermal management must be accomplished in harsh environments.

fluteck™ K300 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

Pfluon Chemical 8200G is a pure resin particle,hypocrystalline,standard viscosity and capable for plastic forming process like injection,squeeze etc. It appears in beige color.

PolyClean Technologies PEEK 450G-MP140 is milled from PEEK 450G-type natural polymer. Powders have been sifted through 140 mesh sieve, yielding a particle size distribution ranging from ~40 to ~106 microns.

Pfluon Chemical 8800GF30 is a glass fiber reinforced resin particle,standard viscosity,beige color and capable for plastic forming process like injection, squeeze etc.

Pfluon Chemical 8200P is a coarse powder with diameter 500um,standard viscosity and capable for plastic injection, squeeze,compound modification etc. It appears in white color.

OpteSTAT™ master batches are Ovation Polymers' line of nano-compounds based on carbon nanotubes. Our proprietary dispersion technology debundles and disentangles carbon nanotubes without compromising their integrity.OpteSTAT™ MB PK 8000 is Polyetheretherketone based carbon nanotube compound. This master batch is easy to blend and disperse using injection molding, and extrusion processes while retaining the physical, structural, and thermal properties of the base polymer.Target applications include components of structural, electronic assemblies/components where ESD/Anti-Stat control is required while retaining exceptional cleanliness, dimensional control and physical properties.

PolyClean Technologies PEEK 810-MP140 is milled from Ketaspire KT-810 natural polymer. Powders have been sifted through 140 mesh sieve, yielding a particle size distribution ranging from ~40 to ~106 microns.