Products in Parts & Components: Polyolefins

LNP LUBRICOMP MG004 compound is based on Polypropylene (PP) resin containing graphite powder. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business LNP LUBRICOMP ML004LS compound is based on Polypropylene (PP) resin containing 20% PTFE. Added features of this grade include: Wear Resistant, Heat Stabilized, Low Extractable.

SABIC's Specialties Business LNP STAT-KON MD000 compound is based on Polypropylene (PP) resin containing conductive carbon powder. Added features of this grade include: Electrically Conductive. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

LNP STAT-KON ME006 compound is based on Polypropylene (PP) resin containing 30% carbon fiber. Added features of this grade include: Electrically Conductive.

LNP STAT-KON FX98500C compound is based on Polyethylene (PE) resin containing conductive carbon powder. Added features of this grade include: Electrically Conductive.

SABIC's Specialties Business LNP STAT-KON MD000ISC compound is based on Polypropylene (PP) resin containing conductive carbon powder. Added features of this grade include: Electrically Conductive, High Impact, Heat Stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP STAT-KON ME003S compound is based on Polypropylene (PP) resin containing 15% carbon fiber. Added features of this grade include: Electrically Conductive, Heat Stabilized. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

MOCOM Compounds ALTECH® PP-H A 4920/108 MR20 is a polypropylene homopolymer heat stabilized, easy release (demolding) and processing stabilized, suitable for injection molding with a melt temperature of 200-250°C and mold temperature of 20-70°C. It is suitable for automotive, electrical, and electronic applications like housings, functional components, interior decoration/finishing, and clothing/fasteners. To maintain its quality, keep it dry and protected from light at temperatures not exceeding 30°C. Pre-drying conditions should be in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours, or in an air circulating dryer at 80-120°C for 2-4 hours.

MOCOM Compounds ALTECH® PP-H FC 4940/100 TV40 is a Polypropylene Homopolymer with a filler/additive system of 40% talcum which offers high stiffness, high heat stabilization, processing stabilization, and easy release (demolding). It is suitable for applications in the electrical and electronic, building and construction, and personal care market segments, such as kitchenware, functional components, housings, and other household goods. To ensure its optimal performance, pre-drying conditions should be completed, and the processing injection molding should be carried out at specific melt and mold temperatures.

MOCOM Compounds ALTECH® PP-H A 2440/550 GF25 MR15 CP is a polypropylene homopolymer with 25% glass fibers and 15% talcum pre-dried in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours, with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is high heat stabilized, chemically coupled, and has high stiffness and easy release (demolding). It is suitable for automotive, electrical, and electronic applications such as exterior parts, interior decoration/finishing, electrical components, and injection molded parts.

MOCOM Compounds ALTECH® PP-H B 2030/156 GF30 is a polypropylene homopolymer with 30% glass fibers, which are chemically coupled and have easy release (demolding) features. It is used for processing injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is suitable for medical/personal care, building, and construction applications such as housings, pump impellers, and functional components.

MOCOM Compounds ALTECH® PP-H FC 4940/500 TV 40 is a polypropylene homopolymer pre-dried with a desiccant dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours. It is suitable for applications in the packaging, building and construction markets, as well as food contact and toys, with typical applications including functional components and housings. To ensure optimal performance, it should be stored in a dry, light-protected environment at a temperature not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H A 1000/120 UV is a polypropylene homopolymer with special features including UV stabilization, easy release (demolding), processing stabilization, and heat stabilization. It is used for electrical and electronic applications such as electrical components, injection molded parts, and consumer electronics. Typical applications include functional components and housings.

MOCOM Compounds ALTECH® PP-B A 2040/150 GF40 CP is a Polypropylene Heterophasic Copolymer with 40% glass fibers, chemically coupled, with an easy release (demolding) agent, and heat stabilization. It is suitable for the market segments of machinery, electrical and electronic, building and construction, and suitable for applications such as sports equipment, interior decoration/finishing, exterior parts, and electrical components. Typical applications include functional components, housings, and fixing elements.

MOCOM Compounds ALCOM® HM PP 1000 AG 14079 is a polypropylene homopolymer with a hygienic material filler/additive system and natural color. It has antibacterial features according to ISO 22196 and is suitable for applications in packaging, personal care, household goods, furniture, building and construction. Typical applications include sanitary articles, hygiene products, kitchenware, functional components, housings, handles, containers, and caps/closures.

MOCOM Compounds ALTECH® ECO PP-B 4920/570 MR 20 is a polypropylene heterophasic copolymer containing 20% talcum, slip agent, easy release (demolding), and heat stabilized with special features containing recycled material. It is suitable for the machinery market segment and typical applications such as air ducts, housing, and unpainted automotive trim parts for various injection molding.

MOCOM Compounds ALTECH® PP-H B 4910/500 MR10 is a polypropylene homopolymer that is processed using injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C, containing 10% talcum and being processing stabilized and easy release (demolding). It is used in the market segments of packaging, furniture, building and construction, and is suitable for injection molded parts, interior decoration/finishing. Typical applications include racking/shelving, household goods, housings, and functional components. To ensure a good quality of the product, it should be stored in a cool, dark place, not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H A 2030/157.01 GF30 is a polypropylene homopolymer pre-dried in an air circulating dryer at 80-120°C for 2-4 h or in a dry air (dessiccant) dryer at 80-120°C for 2-3 h. It is processed through injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. The material contains 30% glass fibers that are chemically coupled and heat stabilized, making it easy to flow. It is suitable for applications such as housings and fixing elements in the automotive, electrical and electronic, and machinery market segments, ensuring reliable performance.

MOCOM Compounds ALTECH® PP-H A 4925/500 MR25 is a polypropylene homopolymer with 25% talcum filler/additive system that is heat-stabilized, easy to release (demold), and processing-stabilized. This material is suitable for injection molding at a melt temperature of 200-250°C and a mold temperature of 20-70°C and is used in the market segments of furniture, building and construction, and automotive for injection molded parts and interior decoration/finishing. Typical applications include functional components, housings, and fixing elements.

MOCOM Compounds ALTECH® PP-H A 4940/106 MR40 is a Polypropylene Homopolymer with a 40% talcum filler/additive system that is heat stabilized, processed stabilized, and has an easy release (demolding). Injection molding should be done at a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is widely used in the automotive, building and construction market segments, primarily for injection molded parts, interior decoration/finishing and exterior parts. Typical applications include different automotive powertrain parts, housings, and functional components. To ensure optimal shelf life, the material should be stored dry, protected from light, and at a temperature of no more than 30°C.

MOCOM Compounds ALTECH® PP-H A 2435/550 GF22 MR13 CP is a polypropylene homopolymer pre-dried in a dry air (dessiccant) dryer at 80-120°C for 2-3 h, or in an air circulating dryer at 80-120°C for 2-4 h. It contains 35% glass fiber/mineral and has chemically coupled, processing stabilized, easy release (demolding), and heat stabilized special features. It is suitable for the machinery, automotive and valve components markets, and can be used for injection molded parts, interior decoration and finishing. For best results, it should be stored dry, protected from light, and not exposed to temperatures above 30°C.

MOCOM Compounds ALTECH® PP-H A 2045/500 is a Polypropylene Homopolymer with 45% glass fibers, heat stabilized, extrusion grade, low emission, and processing stabilized. It is suitable for Pre-Drying Conditions in an air circulating dryer 80-120°C for 2-4 h, or in a dry air (dessiccant) dryer 80-120°C for 2-3 h. Processing Injection molding is done at a melt temperature of 200-250°C and a mold temperature of 20-70°C. This product is used for building and construction, sport and leisure applications, such as functional components, housings, and sports equipment. It should not be exposed to strong UV radiation and should not be stored in direct sunlight.

MOCOM Compounds ALTECH® PP-H A 4920/180 MR20 is a polypropylene homopolymer with 20% talcum, which offers hot water resistance, good chemical resistance, heat stability, easy release (demolding), and good flow. It is designed for injection molding with a melt temperature of 200-250°C and mold temperature of 20-70°C. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. This material is suitable for applications in the building and construction and automotive industry, such as interior decoration/finishing, injection molded parts and housings, fixing elements, and functional components.

MOCOM Compounds ALTECH® PP-B A 2020/150 GF20 CP is a heterophasic copolymer of polypropylene with 20% glass fibers that is chemically coupled, processing stabilized, and heat stabilized. It is suitable for applications in the machinery, automotive, sport, and leisure sectors, such as injection molded parts, interior decoration/finishing, sports equipment, and exterior parts. Typical applications include functional components, housings, and fixing elements.

MOCOM Compounds ALCOM® PP 620/3 BS73 is a polypropylene random copolymer with special features of high density, high acoustic damping, and increased X-Ray contrast. It is used in the furniture, packaging, and personal care market segments, and typical applications include fixing elements and housings. Processing is done via injection molding with a melt temperature of 200-270°C and mold temperature of 20-90°C. For optimal performance, it should be stored in a dry place, protected from light.

MOCOM Compounds ALTECH® PP-B A 4430/120 MR30 UV is a Polypropylene Heterophasic Copolymer with 20% chalk, 10% talcum, and UV, heat, and processing stabilizers, as well as easy release (demolding) properties. For injection molding, a melt temperature of 200-250°C and a mold temperature of 20-70°C should be used. This thermoplastic is suitable for building and construction, electrical and electronic, and sport and leisure market segments, and can be used for domestic appliances, gardening tools, and exterior parts. Typical applications include housings, fixing elements, and functional components.

MOCOM Compounds ALTECH® PP-H A 2340/750 GF30 GK10 CP is a polypropylene homopolymer with a filler/additive system of 30% glass fibers and 10% glass beads, which is chemically coupled, highly heat stabilized, has a good flow, low warpage, easy release (demolding), slip agent, and processing stabilized. It is suitable for a variety of applications, such as electrical and electronic, automotive and interior decoration/finishing, exterior parts, electrical components, housings, functional components, automotive powertrain parts, and batteries.

MOCOM Compounds ALTECH® PP-B B 4915/500 MR15 is a heat-stabilized and processing-stabilized polypropylene heterophasic copolymer blended with 15% talcum. It is suitable for injection molding with a melt temperature between 200-250°C and a mold temperature between 20-70°C, making it ideal for applications in the automotive industry for interior decoration/finishing, clothing/fasteners, and functional components, housings. Pre-drying should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. This product should be stored in a dry and light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PP-B A 2020/550 GF20 CP is a polypropylene heterophasic copolymer pre-dried with a dessiccant dryer at 80-120°C for 2-3 h or an air circulating dryer at 80-120°C for 2-4 h and with a filler/additive system of 20% glass fibers. Processing with injection molding requires a melt temperature of 200-250°C and a mold temperature of 20-70°C. This material has special features such as being chemically coupled, UL-listed, having slip agent, being processing stabilized, having easy release (demolding), being heat stabilized and being suitable for the building and construction, machinery and automotive market segments. Typical applications include housings, fixing elements, and functional components. For optimal performance, this material should be stored in darkness and at not above 30°C.

MOCOM Compounds ALTECH® PP-H B 4920/306 MR20 is a Polypropylene Homopolymer with 20% talcum that is highly processing stabilized, easy to release (demolding), and heat stabilized. It is used in the automotive market for transport systems, fixtures/fittings, housings, functional components, and fixing elements. Pre-Drying Conditions should be done in a dry air (desiccant) dryer between 80-120°C for 2-3 hours, or an air circulating dryer between 80-120°C for 2-4 hours. Processing Injection molding should be done with a melt temperature between 200-250°C and mold temperature between 20-70°C.

MOCOM Compounds ALTECH® PP-H A 1000/140 FR GY1071-14LS is a polypropylene homopolymer with a filler/additive system of laser optimization and special features of laser etchable (dark etching), processing stabilized, easy release (demolding), and heat stabilized. It is suitable for electrical and electronic applications such as injection molded parts, clothing/fasteners, and electrical components and is commonly used for functional components and housings.

MOCOM Compounds ALCOM® HM PP 1000 18038 is a pre-drying condition polypropylene copolymer with a hygienic material filler/additive system and a silver, metallic color similar to RAL 9022 and RAL 9023. It has antibacterial properties according to ISO 22196, and is used in packaging, personal care, household goods, furniture, building, and construction applications such as sanitary articles, hygiene products, kitchen ware, functional components, housings, handles, containers, and caps/closures. Processing injection molding requires a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-B A 2015/550 GF15 CP is a polypropylene heterophasic copolymer with 15% glass fibers that has been chemically coupled, heat stabilized, and processing stabilized. It is suitable for use in automotive, sport and leisure applications such as injection molded parts, engine and drive systems, interior decoration/finishing, and exterior parts. Typical applications include functional components, powertrain parts, and housings.

MOCOM Compounds ALTECH® PP-B A 4815/510 MR15 IM is a polypropylene heterophasic copolymer that is processed by injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It contains 15% chalk and has special features such as impact modification, injection molding grade, heat stabilization, easy release (demolding), and processing stabilization. It is used in electrical and electronic, automotive, and other applications such as electrical components, interior decoration/finishing, clothing/fasteners, functional components, fixing elements, and housings.

MOCOM Compounds ALTECH® PP-H FC 2030/100 GF30 is a Polypropylene Homopolymer with a 30% glass fibers filler/additive system that provides high stiffness and is both processing and heat stabilized. It has a melt temperature of 200-250°C and a mold temperature of 20-70°C. This material is used in market segments such as packaging, personal care, machinery, electrical and electronic products, and is suitable for injection molded parts, electrical components, domestic appliances, and food contact items. Typical applications include kitchenware, functional components, and housings.

MOCOM Compounds ALTECH® PP-H A 4920/109 TV20 is a polypropylene homopolymer with 20% talcum, which is heat stabilized, highly stiff, UL-listed, and processing stabilized for easy demolding. It is used in the electrical and electronic, automotive markets for applications such as electrical components, interior decoration/finishing, exterior parts, housings, functional components, automotive powertrain parts, radiator grilles, and fans.