Products in Parts & Components: Silicones

EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

NuSil™ EPM-2463 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Thermal Interface Materials (TIMs)Comments: 1.5 W/m-K, remains conductive over broad operating temperature range.

P & P Technology SE510FR UL94V0 is available as sheeting, profileextrusions,jointed rings, self-adhesive backed, strip and die-cut. They are particularly suited to use inhigh temperature seals and gaskets, where a soft easily deformable rubber is required and where public safety is critical.

Fujipoly Industries 7BN is for general use. It is made by extruding silicone rubber into a tube shape. The standard materials are roughly divided into two types, 7BN type (for general use) which has various standard dimensions.

NuSil™ DDU-4340 is a NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 30 days).NuSil offers a complete product line of silicone systems for use in drug delivery. Additionally, NuSil is capable of formulating, validating, manufacturing, testing and providing regulatory support for a custom product designed to achieve customer-defined, application-specific physical, mechanical and elution properties.Comments: Low Consistency Elastomer.

Shinepoly® LP2088 modifier has crosslinked silicone and butyl-acylate copolymer core with grafted poly-methyl methacrylate shell. It provides superior low temperature impact performance, thermal stability and hydrolytic resistance with minimum affect on flame retardant performance of PC.

LIM™ 6045 by Momentive Performance Materials is comprised of Liquid Silicone Rubber. It is commonly used as Molding Resin for a variety of applications. It is available in Liquid form.

NuSil™ CV-2500-2 is a controlled volatility black silicone elastomer.

Tarflon® RC2031 by Idemitsu Chemicals is comprised of Polycarbonate and Siloxane polymer. It is commonly used for a variety of applications. .

P & P Technology Black Nickel Graphite Silicone ECB-Q is a black silicone elastomer with a nickel / graphite conductive filler.

Thermobond 3821 is a high thermally conductive adhesive.

P & P Technology Nickel Loaded Fluoro Silicone ECF-N are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity. Many types of filler, from nickel graphite to pure silver, are available to suit a wide range of applications. There are also Fluorosilicone variants for use in the presence of hydrocarbon contamination. The Conductive Silicone Range was originally developed for high performance shielding mainly for military applications. However, the introduction of lower cost llers has now made them accessible to the commercial sector. They are used where environmental and EMI screening is required but space constraints or stringent environmental protection necessitates a small cross section prole, often tted into a groove or channel.

BISCO® BF-2000 is a highly compressible, ultra-soft silicone foam. The combination of low weight and softness makes it an ideal solution where low closure force and sealing are critical. The patented chemistry and cell structure provide a long-term performance advantage.

NuSil™ CV4-2289-1 is a controlled volatility thixotropic silicone elastomer.

NuSil™ R3-1075 is a rtv silicone conformal coating.

ThreeBond Europe SAS TB1211 is a free flowing single-component, solvent free and non-acid RTV (room temperature vulcanizing) silicone liquid gasket. TB1211 is ideal for places where a long, faultless seal is absolutely critical. Recommended for sealing flange surfaces, screw sections and as a gasket dressing, to prevent oil, water, gasoline and chemical leaks. Long tack-free time and fully cured in 24 hours. Recommended for all automotive, motorcycle, watercraft, snowmobile and ATV engines.

BondSeal BS8311 is a high bonding strength fast cure silicone adhesives.

White Ice 510CR is a Thixotropic, No-Sag, and No-Drip type non-reactive Thermally Conductive Silicone Grease with a high thermal conductivity and low thermal resistance. This product is formulated with specialty binding agents to achieve lowest amount of bleed/pump out and evaporations. It is specially designed for vertical applications with vibration and large gap. Offers excellent stability over wide temperature ranges. Easy to apply by dispensing or screen print/Stencil.

Stoner, Inc. E206 Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It is our most popular mold release because of its versatility and high performance.

NuSil™ CV16-2500 is a controlled volatility silicone elastomer.

P & P Technology ECF-Q are constructed from silicone containing metal powder fillers which combine to produce high levels of attenuation with excellent environmental shielding and a high level of conductivity. Many types of filler, from nickel graphite to pure silver, are available to suit a wide range of applications. There are also Fluorosilicone variants for use in the presence of hydrocarbon contamination. The Conductive Silicone Range was originally developed for high performance shielding mainly for military applications. However, the introduction of lower cost llers has now made them accessible to the commercial sector. They are used where environmental and EMI screening is required but space constraints or stringent environmental protection necessitates a small cross section prole, often tted into a groove or channel.

NuSil™ CV-2681-12 is a controlled volatility (NuSil™ CV) silicone materials silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (NuSil™ CV) and Ultra Low Outgassing TM (SNuSil™ CV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Volume Resistivity, 125 ohm-cm, Lap Shear 70 psi (0.48 MPa).

LIM™ 6061 is the next generation in 60-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounds, and valve parts can be made readily from LIM6061 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications sports goggles and masks health care profiles camera parts coating metal rolls.

NuSil™ CV-1152 is a controlled volatility RTV silicone conformal coating.

LIM™ 6050-D2 liquid silicone rubber is a 2-component product formulated for use in liquid injection molding to high performance elastomeric parts. It is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors. LIM6050-D2 offers convenient 1:1 mix ratio, high tear strength, and easy release from molds. Cure time is rapid, generally 10 to 40 seconds (@ 150-205°C) depending upon part size, configuration, and molding temperature.Key Features and BenefitsLIM6050-D2 liquid silicone rubber is distinguished by the following properties: High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration, and molding temperature Wide range of molding temperatures: 150°C (302°F) to 205°C (400°F) Excellent release from metal molds Potential ApplicationsThe combination of excellent clarity, tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Baby bottle nipples Connector inserts Seals Flexible mounts Valves Sports goggles Masks Health care equipment Camera parts Coating metal rolls.

Silopren™ LSR 1640 is a two-component liquid silicone rubber for injection molding processes.LSR 1640 shows in comparison to LSR 1640 a higher productivity, higher transparency, less yellowing and low volatile contents. With this low viscosity LSR, it would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.Key Features and BenefitsVulcanisates consisting of LSR 1640 are distinguished by the following properties: High flowability, low viscosity and short injection time. Low volatiles content Fast cure Excellent mold release Excellent Thermal stability Good rubber-like properties Excellent compression set Excellent resilience High stability to ozone and ultraviolet light Outstanding resistance to aging Not readily combustible, does not melt or drip Easy-pigmentable with LSR Color Pastes fulfill the requirement of KTW Potential ApplicationsBecause of the outstanding properties,LSR 1640 is particularly suitable for the following elastomeric articles: sealing elements, O-rings, stoppers, diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors s.o.

NuSil™ G-9340 is used as a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications.Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chEMIcal and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Thermal Interface Materials (TIMs)Comments: 230 mm Cone Penetration.

POLSIL® MV AB/S is addition curing, two-component liquid silicone elastomers which after the addition of a catalyst cures at room temperature. The curing time may be shortened at higher temperature (i.e. up to 6 h at 70°C). The rubber is suitable for protection of electronic and telecommunication systems against influence of external factors and for stiffening and protecting (flooding) photovoltaic cells in solar panels against impact of climatic factors in the conditions of variable temperatures ranging from -50 to +180°C.

LightSpan® LS2-6140 is a optically clear primerless silicone encapsulant.

Allied Metrics Silicone O-Rings are the superior choice for static applications where resistance to temperature extremes or harsh environmental conditions are required. Though they serve a vast array of applications, silicone O-rings are not suitable for dynamic applications due to their poor tear and abrasion resistance.

BondSeal BS8440 is a high bonding strength fast cure silicone adhesive.

LIM™ 6071 is the next generation in 70-durometer liquid silicone rubber. It is a two-component product formulated for use in liquid injection molding to produce high performance parts. It is clear, but easily pigmentable with Momentive masterbatch colors. The combination of excellent tear strength and very high tensile strength makes this product suitable for a wide variety of applications. Mechanical parts such as connector inserts, seals, flexible mounts, and valve parts can be made readily from LIM6071 liquid silicone rubber.Key Features and Benefits High clarity for excellent visibility Excellent tear strength Convenient 1:1 mix ratio for use with automatic equipment Rapid cure time: 10 to 40 seconds depending upon part size, configuration and molding temperature Wide range of molding temperatures: 150°C (302°F) to 232°C (450°F) Excellent release from metal molds High Bayshore resilience Potential Applications Sports goggles and masks Health care profiles Camera parts Metal roll coatings.

POLSIL® MV AB is addition curing, two-component liquid silicone elastomers which after the addition of a catalyst cures at room temperature. The curing time may be shortened at higher temperature (i.e. up to 6 h at 70°C). The rubber is suitable for protection of electronic and telecommunication systems against influence of external factors and for stiffening and protecting (flooding) photovoltaic cells in solar panels against impact of climatic factors in the conditions of variable temperatures ranging from -50 to +180°C.

Shinepoly® LP2082 modifier has crosslinked silicone and butyl-acylate copolymer core with grafted poly-methyl methacrylate shell. It provides superior low temperature impact performance and weatherability with minimum affect on flame retardant performance of PC.

Silductor 6201 is an electrically conductive silicone adhesive.