Products in Parts & Components: Good Mechanical Properties

Duresco NU 6110 T/NU 6110 V is a Glass fiber reinforced epoxy molding compound with very good mechanical properties for high temperature applications.

Polynt Group SMC 3300 RF R20 is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This SMC has been developed for electrical application. SMC 3300 RF R20 joint good mechanical properties and good fire protection grade. SMC 3300 RF R20 is certified V0 3,0 mm by UL laboratories. SMC 3300 RF R20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

INOFLON® M690 has fine particle size with narrow distribution and it is used in skived film and sheet compounding.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

EP GC 308 15 is a woven glass cloth epoxy (epoxide) resin.

fluteck™ E200 FEP is a thermoplastic fluoropolymer based on fluorinated ethylene propylene (FEP).

RIALENE P 101 SGF10plus ST natur is in Granules, Natural Color. RIABLEND ® product line includes all plastic compounds that consist of at least two polymers. On the one hand, we combine polymers that can be easily combined with one another due to their chemical structure. On the other hand, our blends are also polymers that would not necessarily go together straight away, which we combine using a compatibilizer. With our egg-laying wool milk sow, you have a multitude of possible combinations - and thus also various properties of the plastics - at your disposal.

Nanoshel Carbon Nanotube Masterbatches PA66 CNT is a polymer carbon nanotube masterbatch.

PPR-01ML contains colorant and is a kind of masterbatch with high mechanical properties, aging resistance , thermal stability and good processibility. It can be colored up easily and its production cost is low.

Resinoid 1328 is a glass reinforced, two-step phenolic molding compound. It was specifically developed for applications requiring exceptional tensile strength such as grinding wheels. Resinoid 1328 exhibits excellent electrical and thermal properties as well as dimensional stability. This material comes in pelletized from and is suitable for injection, transfer or compression molding. It can be preformed on automatic equipment.

POLYKING® Polyamide engineer plastic is not only super high strength and high rigidity, but also has very excellent heat stability and chemical resistance. It shows very excellent stability on different kinds of oil compounds and has excellent electrical property. It is widely used in electrical and electronic, automotive, communication, mechanical engineer, sport apparatus etc..

3B Fiberglass DS 3185E-10N is designed to reinforce polyester PBT resins. When molded this product exhibits excellent dry mechanical properties and good color characteristics.DS 3185E-10N can also reinforce and show excellent performances in blends with PET and flame-retardant formulations. An innovative manufacturing technology provides DS 3185E-10N chopped strand product with an excellent strand integrity and bulk density. As a result this product exhi-bits excellent feeding properties with low fuzz generation.DS 3185E-10N is also free of Nonylphenol Ethoxylates.

Anhui Wanwei Group Water-soluble PVA fiber First grade is a kind of cotton-like synthetic fiber, which has been widely used in agriculture, light industry, textile, military, medical and other fields in recent years.

Grunstoff Kunststoff-Recycling POM (Polyoxymethylen) is a typical technical Thermoplastic with good mechanical properties and high dimensional stability as well as outstanding gliding and abrasion behavior. As a result, it is a preferred construction material, e.g., for precision parts in precision engineering; in particular there are many applications in the field of snap fasteners. POM Thermoplastics also possess a good resistance to many chemicals.

ESTOPLAST EP 1500NNO2 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

Resinoid 2002-C5 is a fabric reinforced, two-step phenolic molding compound. It has improved heat distortion and dimensional stability. It has been formulated to exhibit excellent wear resistant properties. It is available in bulk form and is recommended for compression or transfer molding.

Polipol 339-TA-LSE-H40 is a Hand lay-up / Spray-up medium reactivity thixotropic preaccelarated LSE polyster.

Pfluon Chemical 8800FC30 is a abrasion reinforced Wear resistant particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

The AD Series™ antenna materials from Rogers Co rporation are high performance, specialty materials that are specifically engineered and manufactured to meet the demands of today’s wireless antenna markets. Increased antenna performance requirements are a constant trend in the market today. Rogers has the materials needed to meet the design needs of this market both today and into the future.

WELLPREN® IM888 is most suitable for substitution of Acrylic impact modifier (AIM) or blending with Acrylic impact modifier (AIM) with a certain percentage without adjusting the processing data and the formulation, resulting in an optimum performance /cost solution. All in, WELLPREN®RESIN helps fabricators and compounders meet increasing critically performance requirements and cost control needs.

Promyde® BF940 is a high viscosity polyamide without additives specially formulated for the production of films with a high transparency and improved elongation, tear and puncture resistance. Promyde® BF940 can be processed in cast and blown film extruders. It is specially recommended in the inner polyamide layer in coextruded structures as PE/Tie/PA/Tie/PE. Promyde® BF940 minimizes curling, specific recommendations are available on request.

BESTNYL® SC00VI01AWX is a polyamides (PA). Polyamide is a technical plastic characterized by having good mechanical properties, excellent rigidity, good stabilization at high temperatures and good chemical resistance.

Er=2.33) uses a higher fiberglass/PTFE ratio for a more highly reinforced combination that offers better dimensional stability and increased mechanical strength.

XINOMER® PP HFFR 1509 is a flame retardant booster system that increases the flame-retardant effect in halogen free, flame retardant, thermoplastic compounds even at low addition levels. The HFFR products are available with various base resins for both injection molding and extrusion applications.

Yuyao Zhongfa Engineering Plastics PA FRML is Flame-Retardant Masterbatch of PA6 or PA66 which has good mechanical properties, aging resistance, thermal stability and good processibility, etc. after adding the master. and the flame retardant grade could be changed from UL-94, V0, V1, V2 to HB. The mixture of flame-retardant masterbatch and PA6 can replace flame-retardant PA6 to decrease production cost, so does PA66 and can be used for household electric appliance parts, low voltage electrical apparatus, air switch, electric plug-in unit, communications equipment's, lighting luminaire, luminaire ,mining electric apparatus parts, etc.

CSM 40 rubber is a kind of white material which turns to light yellow or brown, tasteless evenly rubber-shape, and it has the mutual character with rubber which also has its own property. 2. It is non-toxic, non-explosive, open flame burning, auto-extinction after remove. 3. It has excellent ozone resistance, resistance to atmospheric aging, chemical resistance, better physical mechanical, thermal aging resistance and low temperature resistance (-20℃-12℃), oil resistance, flame resistance, abrasion resistance and electrical insulation etc.

POULOY® 2001B is applied in communication products, audio & video products, E/ E parts.

Next Nylon 6 Industrial Series NXF-02WH is PA6 Un Filled FR White compound.

Lattice Composites LCMC-C2 has the highest strength BMC.

TMM® thermoset microwave materials are ceramic, hydrocarbon, thermoset polymer composites designed for high plated-thru-hole reliability stripline and microstrip applications. TMM laminates are available in a wide range of dielectric constants and claddings. The electrical and mechanical properties of TMM laminates combine many of the benefits of both ceramic and traditional PTFE microwave circuit laminates, without requiring the specialized production techniques common to these materials. TMM laminates do not require a sodium napthanate treatment prior to electroless plating.

INOFLON® M695 has fine particle size with narrow distribution and it is used in skived film and sheet compounding.

ORTHOPHTHALATES OP1010 is a Fire retardant Resin.

DISTITRON® 275 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

RO4830™ thermoset laminates are well suited for price-sensitive millimeter wave applications, such as 76-81 GHz automotive radar sensors, and are a reliable, lower cost alternative to conventional PTFE-based laminates. RO4830 laminates have a slightly higher dielectric constant of 3.2 at 77GHz, versus PTFE-woven glass laminates. LoPro® reverse treated copper foil cladding contributes to RO4830 laminates’ excellent insertion loss at 77GHZ of 2.2 db per inch.

FORMPOLY® N6ST60 offers a wide range of Nylon 6 grades from unfilled, glass fiber reinforced, mineral reinforced to flame retardant including FORMPOLY N6ST60 which is lubricated Nylon 6 with very high impact and moderate mechanical properties.

RT/duroid® 6006/6010LM microwave laminates are ceramicPTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. RT/duroid 6006 laminate is available with a dielectric constant value of 6.15 and RT/duroid 6010LM laminate has a dielectric constant of 10.2