Products in Parts & Components: High Temperature Resistance

Pfluon Chemical 8100FP is a resin fine powder with diameter 50um,standard viscosity and capable for pressing mold,compound modication etc. It appears in white color.

ISO TECH Kunststoff GmbH ISO-MID PA 6 is a thermoplastic, semi-crystalline plastic that has proven itself particularly due to its good properties at high temperatures. Due to its well-balanced mechanical properties, ISO-MID PA 6 is also widely used as a material for plain bearings, rollers or gear wheels.

Neoplast™ 163 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

PEEKshrink® is a linear, semi–crystalline aromatic polymer, is considered one of the highest performing thermoplastic materials; it can withstand extreme temperatures, high pressure and caustic fluids. Now, Zeus has taken PEEK to an entirely new level of performance with PEEKshrink™. PEEKshrink™ provides a shrink-to-fit layer of protection for sensitive components and critical connections. PEEKshrink™ is an ideally suited product for challenging environments such as oil and gas exploration where abrasion, intense pressure, chemicals, water, or dielectric interference pose a threat to wires and electrical components. PEEKshrink™ is an obvious and optimal splicing aid for PEEK insulated wire. PEEKshrink™ is an alternative to traditional fluoropolymer protective coatings with its very wide working temperature range.

Neoplast™ 173 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Manifattura Cattaneo PTFE normally considered a thermoplastic material, is the best known and most used fluoropolymer. Its chemical-physical characteristics make it essential to use specific techniques for its production.

Verkid® BMC PX4 is a fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives. Generally thermoset unsaturated polyester or vynil-ester resins are used as organic matrix. With the aim of enhance its characteristics and improve its transformation, other components are added: catalysts, inhibitors, thermoplastic additives, demoulding agents, thickeners and pigments.

Pfluon Chemical 8800CF30 is a carbon fiber reinforced resin particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

VTEC™ BG21 is a High temperature resistance and it is Superior mechanical properties

ZA OF1 is a addition silicone (PLATINUM curing agent), appears in form of gel. It's color is translucid and used in special effects and electronic use.

Neoplast™ 135 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Von Roll Isola AR 600 P 01 is composed of epoxy resin and aramid fabric reinforcement.

StarPCS™ SBMC-998 are carbon fiber reinforced molding compounds containing a discontinuous carbon fiber, a specially formulated StarPCSTM polycarbosilane resin, and refractory particulate. SBMC-900 and SBMC-998 can be used in the cured state, but are specifically designed for use as a ceramic matrix composite (CMC) thermal or mechanical structure.

Verkid® SMC H154 is used in hot press, compression molding for the production of large parts with high mechanical properties and excellent surface finish. It is a glass fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives.

Neoplast™ 167 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Pfluon Chemical 8200CF30 is a carbon fiber reinforced resin particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

Pfluon Chemical 8900CF30 is a carbon fiber reinforced resin particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

Ceramer 60 LF is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

Korrels B.V. PA, 10% carbon fiber reinforced, black is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

VTEC™ GF63 is a High temperature resistance and it is Superior mechanical properties

Korrels B.V. PA, unfilled, MoS2, modified is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

fluteck™ P2000 PTFE Premium Grade-USP Class VI is a high tech Virgin PTFE for Ram Extrusion, Compression and Isostatic molding, classified as medical grade according to the standard USP VI (50° C -122° F and 121° C – 250° F) and ISO 10993-1:2009.

Neoplast™ 155 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

PermaFelx® 50 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

Questar® CP-131 Polyester Film 48 Gage is a clear Polyester Film with medium haze that is Corona Treated on one side for printability, has excellent handling characteristics, and is FDA approved for direct food contact. It is a multipurpose film well suited for applications that require strength and high temperature performance.

Korrels B.V. PA, unfilled is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

PLASTICYL™ PEEK1001 is a conductive masterbatch based on Poly Ether Ether Ketone (PEEK) loaded with 10% of Nanocyl’s MWCNTs (NC7000™). Because of its low viscosity and high flow, PLASTICYL™ PEEK1001 is ideal for injection molding and extrusion processes.

SAYTEX® CP-2000 flame retardant is a reactive intermediate, or additive, depending on the application.As a reactive flame retardant, SAYTEX CP-2000 flame retardant finds particular application in epoxy, vinyl esters and polycarbonate systems. As an additive flame retardant, SAYTEX CP-2000 flame retardant is widely used in ABS.

Da/Pro Rubber Conductive Elastomers are rubber compounds that have been specially compounded and modified to make the rubber electrically conductive. The level of conductivity of rubber ranges from Insulative to Antistatic to EMI/RFI Shielding to Highly Conductive. The base polymer is an insulating material. Ingredients added to make a rubber compound effect the level of conductivity.

Neoplast™ 180 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Ceramer 15 is a sinterable high performance polymers based on polyphenylene sulfone (PPSO2).

SynFoam ELG is a two part closed cell syntactic resin system that is based on epoxy rather than polyurethane chemistry. ELG can withstand continuous exposure up to 300oF and retain it's rigidity. SynFoam ELG has low dielectric loss and dielectric properties. The weight is significantly lower than most low loss materials used for electronic applications. The system is suitable for both electronic potting and encapsulation as well as structural support. SynFoam ELG is shipped as two components which when mixed together can be poured and cast into various shapes and sizes. SynFoam ELG is available in 1 and 5 gallon kit sizes. Each kit contains an A and B side that must be mixed together prior to casting. SynFoam ELG does not require temperature to cure, but requires higher postcure temperatures to reach the maximum service use temperature. Please consult the appropriate instructions prior to using ELG.

Neoplast™ 155 FT SW B are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

SAYTEX® 8010 flame retardant is a non-diphenyl oxide based product containing a high level of aromatic bromine.SAYTEX 8010 flame retardant can be used in a wide range of high performance applications. In particular it finds use in styrenic polymers, engineering resins, wire & cable and elastomers.

Korrels B.V. PA, 10% glass fiber reinforced, natural is the most commonly used engineering thermoplastics in various markets due to their excellent strength and durability properties. At 4KTEC, we develop and commercialize a variety of polyamide compounds for a wide variety of applications. These customer specific compounds have the advantage that we can adapt them to significantly change the properties of the material and add values ​​to the material, such as extreme stiffness, high dimensional stability and low warp properties.

Pfluon Chemical 8100P is a coarse powder with diameter 500um,standard viscosity and capable for plastic injection, squeeze,compound modification etc. It appears in white color.