Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Electrical & Electronics
Parts & Components
Products in Parts & Components: Impact Modified
445 Products found in Parts & Components
Browse
Applications
Show All 12 Categories
Filters
Suppliers
Product Families
Functions
End Uses
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
MOCOM Compounds
ALCOM® LB ECO PC 1000 17157 FR IM WT2083-07
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Additives Included:
UV Stabilizer, Impact Modifier, Flame Retardant
MOCOM Compounds ALCOM® LB ECO PC 1000 17157 FR IM WT2083-07 is a polycarbonate base polymer with special features including impact modification, UV stabilization, flame retardancy, and containing recycled material. It is suitable for electrical and electronic, lighting applications such as light guides, lamps, sockets, and various other applications. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, 120°C in an air circulating dryer for 4-12 hours, and maximum moisture content should be <0.02%. For injection molding, the melt temperature should be 270-310°C and the mold temperature should be 80-110°C.
MOCOM Compounds
ALTECH® ECO PA66 2030/116.01 GF30
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Functions:
Resin
CAS Number:
107-19-7
Additives Included:
Processing Stabilizer, Impact Modifier
Chemical Family:
Polyamides
Flexural Modulus:
8500.0 - 8500.0 MPa
Labeling Claims:
Recycled, Conflict minerals-free, Azo Dyes-free, Azo Colorants-free, PFOS-free, Persistent Organic Pollutants (POP)-free, PFOA-free
MOCOM Compounds ALTECH® ECO PA66 2030/116.01 GF30 is an impact-modified and processing-stabilized polyamide 66 resin with 30% glass fibers and recycled material. It is suitable for applications such as oil pump parts, housings, and automotive trim unpainted, cooling systems, chassis, steering, and impact protection/shock absorbers. For injection molding, the melt temperature should be between 280-300°C and the mold temperature should be between 80-120°C. It is suitable for the automotive market segment and provides excellent mechanical properties.
MOCOM Compounds
ALTECH® PA6 A 2015/310 GF15 IM
Polymer Name:
Polyamide 6 (PA 6)
Functions:
Resin
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Chemical Family:
Polyamides
Labeling Claims:
PFOS-free, PAH-free, Persistent Organic Pollutants (POP)-free, Azo Dyes-free, Azo Colorants-free, PFOA-free, Conflict minerals-free
Additives Included:
Processing Stabilizer, Nucleating Agent, Heat Stabilizer, Impact Modifier
Features:
Impact Modified, Nucleated, Heat Stabilized, Processing Stability
MOCOM Compounds ALTECH® PA6 A 2015/310 GF15 IM is a Polyamide 6 base polymer, impact modified, heat stabilized, injection molding grade, and nucleated with 15% glass fiber filler/additive system and processing stabilized. For processing injection molding, the melt temperature should be between 270-290°C and mold temperature between 80-100°C. Typical applications include housings, operating elements, impact protection/shock absorbers, and functional components. This product is suitable for the Machinery, Electrical and Electronic, and Automotive market segments. It should be stored in a dry and light-protected environment, not above 30°C, to ensure its optimal performance.
MOCOM Compounds
ALTECH® PA6 A 2030/516.01 GF30 IM
Polymer Name:
Polyamide 6 (PA 6)
Functions:
Resin
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
CAS Number:
29297-55-0
Chemical Family:
Polyamides
Additives Included:
Heat Stabilizer, Impact Modifier, Processing Stabilizer, Nucleating Agent
Labeling Claims:
Azo Colorants-free, PFOA-free, Azo Dyes-free, PFOS-free, Conflict minerals-free, Persistent Organic Pollutants (POP)-free, PAH-free
Certifications & Compliance:
EC No.1907/2006, ISO 50001, ISO 13485, REACH (Europe), ISO 9001, ISO 17025, SVHC Compliant, REACH (UK), ISO 14001, RoHS Compliant, ISO 45001, Directive 2011/65/EC amended through EU/2015/863 (RoHS), IATF 16949
MOCOM Compounds ALTECH® PA6 A 2030/516.01 GF30 IM is a polyamide 6 with 30% glass fibers filler/additive system. It is suitable for injection molding with melt temperatures of 270-290°C and mold temperatures of 80-100°C. It has easy release (demolding), impact modified, injection molding grade, heat stabilized, nucleated and processing stabilized special features. It is typically used in automotive, electrical, and electronic markets for exterior parts, interior decoration/finishing, and electrical components applications such as housings, functional components, and plugs/connectors. Pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on the moisture content, with a maximum moisture content of 0.15%.
MOCOM Compounds
ALCOM® PA6 900/8 GF10 MR20 IM
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber, Mineral
Additives Included:
Heat Stabilizer, Impact Modifier
MOCOM Compounds ALCOM® PA6 900/8 GF10 MR20 IM is a heat-stabilized, low-warpage, impact-modified polyamide 6 base polymer with 10% glass fibers and 20% mineral filler/additive system. It is suitable for housings and functional components in the automotive and machinery market segments. It should be processed with a melt temperature of 270-290°C and a mold temperature of 80-100°C.
MOCOM Compounds
ALTECH® PA6 A 2015/710 GF15 IM
Polymer Name:
Polyamide 6 (PA 6)
Functions:
Resin
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Chemical Family:
Polyamides
Additives Included:
Nucleating Agent, Heat Stabilizer, Impact Modifier
Labeling Claims:
Azo Dyes-free, PFOS-free, Azo Colorants-free, Conflict minerals-free, Persistent Organic Pollutants (POP)-free, PAH-free, PFOA-free
MOCOM Compounds ALTECH® PA6 A 2015/710 GF15 IM is a high-impact modified, heat-stabilized, nucleated Polyamide 6 filled with 15% glass fibers, suitable for injection molded parts. It is suitable for markets such as automotive, machinery, building and construction, and sport and leisure applications such as clothing/fasteners, housings, and functional components. For optimal processing of injection molding, melt temperature should be 270-290°C and mold temperature should be 80-100°C.
MOCOM Compounds
ALTECH® PA66 A 1000/310 IM
Polymer Name:
Polyamide 66 (PA 66)
Functions:
Resin
Processing Methods:
Injection Molding
Additives Included:
Heat Stabilizer, Impact Modifier
Chemical Family:
Polyamides
MOCOM Compounds ALTECH® PA66 A 1000/310 IM is a heat-stabilized, low-temperature impact-modified, easy-flow, easy-release (demolding) polyamide 66 base polymer. It is suitable for use in the automotive, machinery, and injection molded parts market segments for applications such as housings, various injection molded parts, cable guides, and different automotive powertrain parts. It should be stored in a dry, light-protected area not exceeding 30°C.
MOCOM Compounds
ALTECH® ECO PA66 2030/310 GF30 IM
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Functions:
Resin
Chemical Family:
Polyamides
Fillers Included:
Glass Fiber
Additives Included:
Slip Agent, Impact Modifier, Heat Stabilizer
Features:
Impact Modified, Good Mold Release, Heat Stabilized
MOCOM Compounds ALTECH® ECO PA66 2030/310 GF30 IM is a polyamide 66 resin with 30% glass fibers and is high heat stabilized and impact modified. It also contains recycled material, making it an ideal choice for automotive, machinery, and different automotive powertrain parts, housings, fans, and machinery components. To ensure quality and optimal performance, injection molding should be done with a melt temperature of 280-300°C and mold temperature of 80-120°C. Moreover, the product should be kept in the dark and should not be stored above 30°C.
MOCOM Compounds
ALTECH® PA6 A 1000/716 IM
Polymer Name:
Polyamide 6 (PA 6)
Functions:
Resin
Processing Methods:
Injection Molding
Chemical Family:
Polyamides
Additives Included:
Processing Stabilizer, Nucleating Agent, Heat Stabilizer, Impact Modifier
Labeling Claims:
Azo Dyes-free, PFOS-free, Azo Colorants-free, Conflict minerals-free, Persistent Organic Pollutants (POP)-free, PAH-free, PFOA-free
MOCOM Compounds ALTECH® PA6 A 1000/716 IM is a heat stabilized, impact modified, injection molding grade, processing stabilized, and nucleated polyamide 6 base polymer. It is suitable for automotive, machinery, clothing/fasteners and injection molded parts applications and is suitable for functional components and housings. To ensure the quality of the product, it should be stored in a dry and dark environment, not exceeding 30°C.
MOCOM Compounds
ALTECH® PA66 A 1000/501 IM
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Functions:
Resin
Additives Included:
Impact Modifier, Heat Stabilizer
Labeling Claims:
PFOA-free, Azo Dyes-free, PFOS-free, Azo Colorants-free, Conflict minerals-free, Persistent Organic Pollutants (POP)-free, PAH-free
Certifications & Compliance:
ISO 9001, IATF 16949, ISO 17025, SVHC Compliant, REACH (UK), EC No.1907/2006, ISO 50001, ISO 14001, RoHS Compliant, ISO 45001, ISO 13485, REACH (Europe), Directive 2011/65/EC amended through EU/2015/863 (RoHS)
MOCOM Compounds ALTECH® PA66 A 1000/501 IM is a high impact modified, heat stabilized polyamide 66 perfect for automotive applications such as housings, injection molded parts, and air fans. During processing injection molding, it should be heated to a melt temperature of 270-290°C and a mold temperature of 40-80°C.
MOCOM Compounds
ALCOM® PA66 910/8 IM SV1246-07MCF
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Additives Included:
Impact Modifier, UV Stabilizer, Heat Stabilizer
MOCOM Compounds ALCOM® PA66 910/8 IM SV1246-07MCF is a polyamide 66 base polymer with a silver, metallic effect and low tendency to flow lines. It is impact modified and heat-stabilized, and is suitable for injection molding with a melt temperature of 270-290°C and a mold temperature of 40-80°C. Mainly used for automotive and machinery applications for functional components and housings, this polymer is an excellent choice.
MOCOM Compounds
ALTECH® PA6 A 2015/507 GF15
Polymer Name:
Polyamide 6 (PA 6)
Functions:
Resin
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Chemical Family:
Polyamides
Labeling Claims:
PFOS-free, PAH-free, Persistent Organic Pollutants (POP)-free, Azo Dyes-free, Azo Colorants-free, PFOA-free, Conflict minerals-free
Additives Included:
UV Stabilizer, Nucleating Agent, Lubricant (Unspecified), Impact Modifier
Features:
Impact Modified, Lubricated, Nucleated, UV Stabilized, UV Resistant, Good Mold Release
MOCOM Compounds ALTECH® PA6 A 2015/507 GF15 is a pre-dried polyamide 6 material with a glass fiber and lubricant additive system. It is UV stabilized, nucleated, impact modified, and easy to release (demolding). Its melt temperatures range from 270-290°C while the mold temperatures should be between 80-100°C. The maximum moisture content should not exceed 0.15%. Typical applications for this material include oil pump parts, bearings and sliding elements, engine covers, functional components, and housings. It is suitable for use in the automotive, building and construction industries.
MOCOM Compounds
ALTECH® ECO PA6 2030/219 GF30 IM
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Functions:
Resin
Chemical Family:
Polyamides
Fillers Included:
Glass Fiber
Additives Included:
Impact Modifier, Heat Stabilizer
End Uses:
Housings
Features:
Heat Stabilized, Impact Modified
MOCOM Compounds ALTECH® ECO PA6 2030/219 GF30 IM is a heat-stabilized, impact-modified, injection molding grade containing 30% glass fibers and recycled material. It should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours depending on moisture content. During processing, the melt temperature should be set between 270-290°C and the mold temperature between 80-100°C. Typical applications include housings.
MOCOM Compounds
ALTECH® PA6 A 1000/110 IM
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Injection Molding
Functions:
Resin
Chemical Family:
Polyamides
Additives Included:
Impact Modifier, Heat Stabilizer
Labeling Claims:
Azo Dyes-free, Azo Colorants-free, PFOS-free, PFOA-free, Persistent Organic Pollutants (POP)-free, PAH-free, Conflict minerals-free
MOCOM Compounds ALTECH® PA6 A 1000/110 IM is a high-impact modified, dry-impact modified, easy-release, and easy-flow Polyamide 6 base polymer. It is pre-dried at 80°C in a dry-air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. This material is used in Machinery, Automotive, and other market segments and is suitable for exterior parts, interior decoration/finishing, and pump components. Typical applications include housings, clips, functional components, and protection-strips.
MOCOM Compounds
ALTECH® PA6 A 2015/327
Polymer Name:
Polyamide 6 (PA 6)
Functions:
Resin
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Chemical Family:
Polyamides
Labeling Claims:
PFOS-free, PAH-free, Persistent Organic Pollutants (POP)-free, Azo Dyes-free, Azo Colorants-free, PFOA-free, Conflict minerals-free
Additives Included:
UV Stabilizer, Impact Modifier
Features:
Impact Modified, UV Stabilized, UV Resistant, Good Mold Release
MOCOM Compounds ALTECH® PA6 A 2015/327 is a polyamide 6 reinforced with 15% glass fibers that has been UV stabilized and impact modified for easy demolding. This product is commonly used in the automotive, building, and construction markets for applications such as cooling systems, fuel systems, gear wheels, roller bearings, and injection molded parts. It is typically used for oil pump parts, bearings, sliding elements, engine covers, and housings.
MOCOM Compounds
ALTECH® PA66 A 2030/310 GF30 IM
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Functions:
Resin
Chemical Family:
Polyamides
Fillers Included:
Glass Fiber
Additives Included:
Impact Modifier, Heat Stabilizer
End Uses:
Stearing, Automotive Applications, Drive Systems, Chassis, Housings, Automotive Interior Parts, Machine/Mechanical Parts, Automotive Exterior Parts, Engine Systems
Features:
Impact Modified, Heat Stabilized
MOCOM Compounds ALTECH® PA66 A 2030/310 GF30 IM is a heat-stabilized, impact-modified polyamide 66 that is suitable for injection molding. It is used in the automotive, machinery, and other markets for injection-molded parts such as exterior parts, chassis, steering, engine, and drive systems, as well as housings and various automotive powertrain parts. To ensure optimum performance, it should be stored dry and protected from light at temperatures not exceeding 30°C.
MOCOM Compounds
ALTECH® PA6 A 2015/210 GF15 IM
Polymer Name:
Polyamide 6 (PA 6)
Functions:
Resin
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Chemical Family:
Polyamides
Labeling Claims:
PFOS-free, PAH-free, Persistent Organic Pollutants (POP)-free, Azo Dyes-free, Azo Colorants-free, PFOA-free, Conflict minerals-free
Additives Included:
Heat Stabilizer, Impact Modifier
Features:
Impact Modified, Heat Stabilized
MOCOM Compounds ALTECH® PA6 A 2015/210 GF15 IM is a polyamide 6 injection molding grade with 15% glass fiber filler/additive system that is impact modified and heat stabilized. It is suitable for applications in the machinery, electrical and electronic market segment, such as power tools and injection molded parts. Pre-drying conditions are 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on moisture content, with a maximum moisture content of 0.15%. The melt temperature range is 270-290°C and the mold temperature range is 80-100°C. Typical applications include housings and security engineering parts.
MOCOM Compounds
ALTECH® PA6 A 1000/310 IM
Polymer Name:
Polyamide 6 (PA 6)
Functions:
Resin
Processing Methods:
Injection Molding
Chemical Family:
Polyamides
Labeling Claims:
PFOS-free, PAH-free, Persistent Organic Pollutants (POP)-free, Azo Dyes-free, Azo Colorants-free, PFOA-free, Conflict minerals-free
Additives Included:
Heat Stabilizer, Impact Modifier
Features:
Impact Modified, Good Flow, Heat Stabilized, Good Mold Release
MOCOM Compounds ALTECH® PA6 A 1000/310 IM is a polyamide 6 base polymer with special features including high impact modified, low temperature impact modified, heat stabilized, and easy release (demolding) properties. It is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C. This polymer is suitable for a variety of applications including automotive, building and construction, and furniture, such as housings, different automotive powertrain parts, and functional components. It should be stored in a dry, light-protected environment not exceeding 30°C and kept away from high temperatures and direct sunlight.
MOCOM Compounds
ALTECH® PA66 A 2015/510 GF15 IM
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Functions:
Resin
Chemical Family:
Polyamides
Fillers Included:
Glass Fiber
Additives Included:
UV Stabilizer, Impact Modifier, Heat Stabilizer
Features:
Heat Stabilized, UV Stabilized, Impact Modified, Heat Aging Resistant
MOCOM Compounds ALTECH® PA66 A 2015/510 GF15 IM is a polyamide 66 material with 15% glass fibers that has been high heat stabilized, UV stabilized, and impact modified. It is primarily used for injection molded parts in the automotive, building, and construction markets, such as housings and interior/exterior decorations. For injection molding, melt temperature should be between 280-300°C and the mold temperature should be between 80-120°C. Additionally, the material should be stored in a dry, protected place away from light, at temperatures not exceeding 30°C.
MOCOM Compounds
ALTECH® PA6 A 1000/318 IM
Polymer Name:
Polyamide 6 (PA 6)
Functions:
Resin
Processing Methods:
Injection Molding
Chemical Family:
Polyamides
Labeling Claims:
PFOS-free, PAH-free, Persistent Organic Pollutants (POP)-free, Azo Dyes-free, Azo Colorants-free, PFOA-free, Conflict minerals-free
Additives Included:
Heat Stabilizer, Impact Modifier
Features:
Impact Modified, Heat Stabilized, Good Mold Release
MOCOM Compounds ALTECH® PA6 A 1000/318 IM is a special injection molding grade of Polyamide 6 with impact modified, easy release (demolding) and heat stabilized properties. It is typically used in the automotive and machinery markets for the production of housings and functional components. Pre-drying conditions should be done at 80°C in a dry air (dessiccant) dryer for 2-12 h, depending on moisture content, with a maximum moisture content of less than 0.15%. Processing injection molding should be done at a melt temperature of 250-270°C and a mold temperature of 40-80°C.
MOCOM Compounds
ALTECH® PA66 A 2015/710 GF15 IM
Polymer Name:
Polyamide 66 (PA 66)
Functions:
Resin
Processing Methods:
Injection Molding
Chemical Family:
Polyamides
Fillers Included:
Glass Fiber
Labeling Claims:
Persistent Organic Pollutants (POP)-free, Conflict minerals-free, Azo Dyes-free, Azo Colorants-free, PFOS-free, PFOA-free, PAH-free
Additives Included:
Impact Modifier, Heat Stabilizer
MOCOM Compounds ALTECH® PA66 A 2015/710 GF15 IM is a polyamide 66 compound with a 15% glass fiber filler/additive system, which is impact modified, heat stabilized, and has a high surface gloss. It is used in a variety of markets and applications, including automotive parts, housings, and functional components. For successful injection molding, the melt temperature should be between 280-300°C and the mold temperature should be between 80-120°C.
Ecomass Technologies
Ecomass® Compound 1850CO78T1
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Copper
Density:
3500.0 - 3500.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850CO78T1 is a copper powder-filled polyamide (PA6) compound that is impact-modified and exhibits good toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 1850ZI70T1 Bk-1
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Mineral
Density:
2500.0 - 2500.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850ZI70T1 Bk-1 is a mineral-filled polyamide 6 (PA6) compound that is impact-modified. The processing method for this compound is injection molding. Ecomass® Compound 1850ZI70T1 Bk-1 is a nontoxic compound used for weighting and balancing applications. The product form is pellets.
Ecomass Technologies
Ecomass® Compound 1850ZN84T1
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Iron
Density:
4000.0 - 4000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850ZN84T1 is an iron powder-filled polyamide (PA6) compound that is impact-modified and exhibits very good toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 1850ZN40T1 Natural
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Iron
Density:
1700.0 - 1700.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850ZN40T1 Natural is an iron powder-filled polyamide 6 (PA6) compound that is impact-modified. The processing method for this compound is injection molding. It is a nontoxic compound used for weighting and balancing applications. The product form is pellets.
Ecomass Technologies
Ecomass® Compound 1850BI80T1E9
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Mineral
Density:
2750.0 - 2750.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850BI80T1E9 is a mineral powder-filled polyamide 6 (PA6) compound that is impact-modified and anti-static. The processing method for this compound is injection molding. It is a nontoxic compound used for weighting and balancing applications. The product form is pellets.
Ecomass Technologies
Ecomass® Compound 1850CO90T1
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Copper
Density:
5000.0 - 5000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850CO90T1 is a copper powder-filled polyamide (PA6) compound that is impact-modified and exhibits good toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 1850ZN76T1 Bk-1
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Steel Powder
Density:
3000.0 - 3000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850ZN76T1 Bk-1 is a steel powder-filled polyamide 6 (PA6) compound that is impact-modified. The processing method for this compound is injection molding. It is a nontoxic compound used for weighting and balancing applications. The product form is pellets.
Ecomass Technologies
Ecomass® Compound 1850IO80T2
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Iron
Density:
3000.0 - 3000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850IO80T2 is an iron powder-filled polyamide (PA6) compound that is impact-modified and exhibits good toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 2150ZN84T1
Polymer Name:
Polyamide 66 (PA 66)
Fillers Included:
Iron
Density:
4000.0 - 4000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 2150ZN84T1 is an iron powder-filled polyamide (PA66) compound that is impact-modified and exhibits good toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 1850IO43T1 Natural
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Iron Oxide
Density:
1700.0 - 1700.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850IO43T1 Natural is an iron oxide-filled polyamide 6 (PA6) compound that is impact-modified. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 1850CO94T1
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Copper
Density:
6000.0 - 6000.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850CO94T1 is a copper powder-filled polyamide (PA6) compound that is impact-modified and exhibits good toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 1850ZN62T1 Natural
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Steel Powder
Density:
2200.0 - 2200.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850ZN62T1 Natural is a steel powder-filled polyamide 6 (PA6) compound that is impact-modified. The processing method for this compound is injection molding. It is a nontoxic compound used for weighting and balancing applications. The product form is pellets.
Ecomass Technologies
Ecomass® Compound 1850BI70T1 Natural
Polymer Name:
Polyamide 6 (PA 6)
Fillers Included:
Mineral
Density:
2200.0 - 2200.0 kg/m³
Processing Methods:
Injection Molding
Ecomass® Compound 1850BI70T1 Natural is a mineral-filled polyamide 6 (PA6) compound that is impact-modified. The processing method for this compound is injection molding. Ecomass® Compound 1850BI70T1 Natural is a nontoxic compound used for weighting and balancing applications. The product form is pellets.
Polymer Resources Ltd.
Polymer Resources Ltd. PRL PC-IM4
Polymer Name:
Polycarbonate (PC)
Chemical Family:
Polycarbonate (PC)
Additives Included:
Impact Modifier
Processing Methods:
Injection Molding, Injection Molding
Addiplast Group
Addiflam® SEI 50054 F
Polymer Name:
Polypropylene Homopolymer (HPP)
Additives Included:
Impact Modifier, Flame Retardant
Flame retardant homopolymer PP halogen free V0, impact modified. For SDS, please contact Addiplast Group using the 'Request Document' button.
Show
36
of 445 results
Go to page
1
2
3
4
5
6
7
8
9
10