Products in Parts & Components

TEGO® Surten 228 E surfactant is a specially formulated wetting agent designed for diverse aqueous applications. This surfactant excels in delivering rapid wetting of pigments and substrates, owing to its remarkable ability to reduce surface tension dynamically. TEGO® Surten 228 E surfactant boasts universally balanced properties, making it suitable for a wide range of applications.

VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.

VESTAKEEP® 5000 G is a high-viscosity, unreinforced polyether ether ketone suitable for injection molding and extrusion. It is a semi-crystalline polymer with superior thermal and chemical resistance. Parts made from VESTAKEEP® 5000 G have low flammability and can be processed using standard machines for thermoplastics.

Evonik VQM 973 formulations consist of vinylfunctional QM resin and vinylfunctional silicone polymers. These formulas are used to produce materials that are transparent, free of fillers, and have great mechanical qualities. They can also improve the mechanical properties and flow behavior of systems that are filled.

VESTAMID® MLT 4500 is a well-established 5-layer tube designed for automotive fuel handling systems. This system features an outer and inner layer of VESTAMID® polyamide 12, providing excellent performance and durability. The MLT 4500 series also incorporates a barrier layer of ethylene vinyl alcohol (EVOH), offering superior permeation resistance against alcohol-containing fuels. Additionally, it delivers exceptional cold impact performance, ensuring reliable operation even in challenging conditions. In specific regions where antistatic properties are required, the multilayer tubing system (MLT) 4540 is available. Based on the same design, the MLT 4540 includes a conductive VESTAMID® polyamide 12 inner layer to fulfill the antistatic requirements. Experience the reliability and versatility of the MLT 4500 series and MLT 4540 in automotive fuel handling systems, ensuring efficient fuel transport and meeting the specific needs of your applications.

VESTAMID® LX9013 BK 9.7507 is a plasticized polyamide 12 compound with exceptionally high long-term resistance under thermal load. It has low moisture absorption, resulting in minimal dimensional and property changes under changing ambient conditions. Extruded tubes made from VESTAMID® LX9013 BK 9.7507 are impact-resistant, even at low temperatures. This material is suitable for producing flexible tubes that are consistently exposed to higher temperatures, such as in the engine compartment of motor vehicles.

Evonik Crosslinker 110, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.

VESTAMID® MLT 7400 is a proven 5-layer tube designed specifically for fuel handling systems in the automotive industry. This innovative system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. The combination of these materials provides exceptional resistance to alcohol-containing fuels, superior chemical resistance on the inner tube surface, and virtually zero extraction levels. VESTAMID® MLT 7400 delivers reliable performance and durability. It comes in the form of pellets or granules, allowing for easy integration into manufacturing processes. With its excellent thermal stability and resistance to oil and fuels, this tube finds extensive applications in the automotive and mobility sectors.

TEGOSIL® Heatban 200 is a heat stabilizer for cured silicone elastomers, especially high-consistency rubber (HCR). Like TEGOSIL® Heatban 110, this product offers protection against thermal degradation up to 300°C. It is compatible with various peroxide- and platinum-cured rubber materials commonly used in industrial and consumer applications. Its pasty viscosity simplifies incorporation into HCR formulations.

VESTAMID® X7297 BK 9.7507 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is characterized by easy processing and high impact strength at low temperatures.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

METABLEN™ A-3750 is an acrylic-modified polytetrafluoroethylene (PTFE) used as an anti-dripping agent in flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.BenefitsResins with METABLEN™ A-3750 and flame retardants achieve V-0 in UL-94 testingImproves melt tensionIncreases die swell to improve surface appearanceImproves filler dispersibilityIncreases foam expansion ratioFeaturesAnti-drippingEasy to handleHigher dispersibility than standard PTFE powders*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Semitron® ESd 520HR Polyamide-imide PAI electro static dissipative shapes are a unique and advanced solution for test equipment and device handling applications within the semiconductor and electronics industry. The product possesses the unique ability to resist dielectric breakdown at high voltages, and maintains its performance throughout the 100V to 1000V voltage range while offering the mechanical performance needed to excel in demanding applications.Features:Resists dielectric breakdown at high voltagesMaintains performance throughout the 100V to 1000V voltage rangeHigh strength and heat resistanceSurface resistivity of 10E10 to 10E12 ohms per squareBenefits:High mechanical strength results in longer useful life of the test heads and greater units (tested) per hour.Minimizes the risk of 'leakage' (cross-talk)Retains its surface resistivity at electrical forces greater than 100 volts.Applications:IC Device Testing Fixtures: A test fixture manufacturer recently began using Semitron ESd 520HR that combines electrostatic dissipation (ESD) and high mechanical strength, to make integrated circuit test heads.Test nests, sockets, and contactors for test equipment and other device handling components.Other applications where controlled bleed off of static charges is critical.

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Semitron® ESd 490HR Polyetheretherketone PEEK electro static dissipative shapes offer similar physical properties as Semitron® ESd 480 PEEK, but exhibit a higher resistivity value in the 10E8 to 10E10 ohms per square range. Semitron® ESd 490HR PEEK components are thermally stable to temperatures of 490° F / 270° C without degradation, and also possess high structural strength and stiffness combined with excellent dimensional stability. Furthermore, this particular grade is non-sloughing, which is why it is an ideal solution for socket, nest, and contactor manufacturing for test equipment, and other electronic device handling applications.Features:High resistivity value in the 10E8 to 10E10 ohms per square rangeThermally stable to temperatures of 490° F / 270° C without degradationHigh structural strength and stiffnessExcellent dimensional stabilityNon-sloughingBenefits:Ideal for socket, nest, and contactor manufacturing for test equipmentSuitable for electronic device handling applicationsNon-sloughing feature makes it a good option for applications where debris generation is a concernHigh thermal stability and dimensional stability make it suitable for high-temperature and critical applicationsApplications:Socket, nest, and contactor manufacturing for test equipmentElectronic device handling applicationsOther high-temperature and critical applications requiring high resistivity, thermal stability, and dimensional stability.

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Semitron® HPV ESd PEEK shapes are specially formulated with specific additives that make them an excellent performer in wear and friction applications where antistatic properties are essential. These shapes are specifically designed for electronic fixture applications that require a high degree of dimensional stability over an extended thermal range, as well as precise machinability.Features:Contains specific additives that provide excellent performance in wear and friction applicationsAntistatic properties for electronic fixture applicationsHigh dimensional stability over an extended thermal rangePrecise machinabilityBenefits:Improved performance in wear and friction applicationsReduced risk of static discharge damage to electronic componentsLong-lasting dimensional stability in high-temperature environmentsEasy to machine for precise applicationsApplications:Electronic fixture applications such as test sockets, contactors, and nestsWear and friction applications where antistatic properties are essentialHigh-temperature applications that require dimensional stability and precise machiningVacuum chamber components and other semiconductor equipment.

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jER™ YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ A 3800 is acrylic-modified polytetrafluoroethylene (PTFE) that can be used as an anti-dripping agent for flame retardant formulations. It can be used for PC and alloy in automotive, aerospace, consumer goods, and electric and electronics applications.BenefitsResins with METABLEN™ A-3800 and flame retardant achieve V-0 in UL-94 testingImproves melt tensionIncreases die swellEnhances surface appearanceIncreases foam expansion ratio FeaturesAnti-dripping capabilityEasy to handle and processFlame retardantGood mechanical propertiesDisperses better than standard PTFE powders *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Semitron® ESd 500HR Polytetrafluoroethylene PTFE electro static dissipative shapes offer an excellent combination of low frictional properties, outstanding dimensional stability, and a high resistivity range of 10E9 to 10E11 ohms per square. Reinforced with a proprietary synthetic mica, Semitron® ESd 500HR PTFE is thermally stable up to temperatures of 500° F / 260° C without degradation, and possesses high thermal insulation and a low coefficient of friction. Due to these characteristics, this grade is ideal for applications where controlled bleed off of static charges is critical.Features:Reinforced with a proprietary synthetic mica for improved performanceLow frictional properties and outstanding dimensional stabilityHigh resistivity range of 10E9 to 10E11 ohms per squareThermally stable up to temperatures of 500° F / 260° C without degradationHigh thermal insulation and low coefficient of frictionBenefits:Ideal for applications where controlled bleed off of static charges is criticalCan withstand high temperatures without degradationLow coefficient of friction and high thermal insulation provide improved performance in various applicationsApplications:Inserts for sensitive devices to reduce damage from static dischargeOther applications where controlled bleed off of static charges is critical and PTFE is typically used.Suitable for use in various industries including semiconductor and electronics, aerospace, and industrial machinery.

METABLEN™ A 3000 is an acrylic-modified polytetrafluoroethylene (PTFE) used in vacuum molding, foam molding, blow molding and profiling. It improves the melt tension that is required in these processing methods by minimizing increases in melt viscosity, without sacrificing the inherent properties of thermoplastics.BenefitsIncreases melt tension of a resinMaintains fluidityEnhances die swellImproves the flexural modulus, heat deformation temperature, and other properties of polypropyleneAnti-drip effect with flame-retardant resinsImproves filler dispersibilityBetter surface appearanceIncreases foam expansion ratioApplicationsAutomotiveConsumer goodsElectric and electronics*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Duratron® D7000 PI Polyimide shapes - a high-performance material ideal for demanding applications that require exceptional thermal resistance, low wear and friction, strength, and impact resistance. With superior electrical and thermal insulation properties, outstanding mechanical performance, great chemical resistance, and outstanding dimensional stability, Duratron® D7000 PI is an ideal solution for designs that reduce weight, extend service life, and reduce overall costs.Features:Superior electrical and thermal insulation propertiesOutstanding mechanical performanceGreat chemical resistanceHigh strength and toughnessOutstanding dimensional stabilityBenefits:Ideal for designs that reduce weightExtends service life before maintenance or replacementReduces overall costs by increasing process uptimeApplications:AerospaceTransportationIndustrialDuratron® D7000 PI is available in stock shapes and direct formed parts, perfect for smaller series and designs where tolerances and geometry of the end part require machining. The material is also available in Hot Compression Molded (HCM) shapes, providing designers with the greatest economy and flexibility.

Semitron® ESd 420V PEI Polyetherimide electro static dissipative shapes, a high-performance material designed for use in the semiconductor and electronics industries. With its unique combination of properties, this grade offers a range of benefits for device handling and test applications.Features:High strength and stiffness, making it suitable for extreme structural applicationsExcellent resistivity in the 10E5 to 10E8 ohms per square range, ensuring reliable electrostatic dissipationHeat deflection temperature of 419° F / 215° C, making it suitable for high temperature environmentsNot subject to dimensional change as a result of exposure to moistureBenefits:Suitable for use in a range of applications within the semiconductor and electronics industriesOffers reliable performance in extreme conditionsCost-effective alternative for applications that do not require the thermal performance of ultra-high performance materialsApplications:Device handling and test applications within the semiconductor and electronics industriesSuitable for use in high temperature environments, including extreme structural applications.

DURABIO™ DT7010 is partially bio-based and truly durable engineering plastic, combining the most advantageous properties of general polycarbonate and PMMA. In addition to excellent mechanical strength, it has excellent scratch resistance and UV resistance. It proudly bears bio-based and BPA-free labeling claims, making it an eco-friendly choice. Ideal for consumer goods, E&E housing, and cosmetic containers. This grade is characterized by high heat resistance and high impact strength. It is suitable for injection mold.

Ketron® LSG FG PEEK is a product available in the form of plates and rods and boasts a range of features including X-ray sterilizability, high stiffness, life science grade, gamma sterilizability, excellent mechanical strength, heat resistance, steam sterilizability, heat sterilizability, plasma gas sterilizability, chemical resistance, ethylene oxide sterilizability, and biocompatibility. It is offered in both beige and black colors and is suitable for applications in equipment and parts, particularly connectors.