Products in Housings & Enclosures: Glass Beads & Fibers

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, Compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

3B Fiberglass DS 2200-13P is a 13 μm filament dia-meter, 4 mm long chopped glass fiber designed for production of Polyolefin compounds.DS 2200-13P shows outstanding compatibility with Polypropylene. This is the material of choice for very high glass content (up to 50 %wt) compound grades that require good fiber dispersion as well as mechanical properties. DS 2200-13P is also desig-ned for parts weathering in prolonged contact with water, detergents and glycol. DS 2200-13P can also be used in applications complying with strin-gent requirements of food contact and drinkable water standards EC 10/2011, FDA, BfR and ACS. DS 2200-13P is supplied on a pel-letized form and offers outstanding feeding-to-extruder behavior as well as excellent fiber impregnation.DS 2200-13P’s sizing chemistry also requires reduced amount of coupling agents so that parts reach optimum mechanical performances.

3B Fiberglass EM 1011 is a non-woven mat made from 3B E-CR glass filaments, consisting of chopped fibers randomly and yet evenly orien-tated. The 50 mm length chopped fibers are coated with silane coupling agent and are held together using emulsion binder. CSM is particularly suitable for hand lay-up process using thermoset resin systems to manufacture wide range of products for automobile, recreation, chemical, electrical industries.CSM EM1011 conforms to BS 14118 and IS 11551.

3B Fiberglass M8610 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane cou-pling agent and the layers held together with a suitable binder.The CFM products contain an insolublebinder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl ester, epoxy and polyurethane resin systems. The M8610 mat is ideally suited for injection molding, RTM and S-RIM processes for molding complex parts. The M8615mat version, with its high rigidity, helps to work with large CFM cuts without loosing _x005F_x001f_bres. The excellent mechanical properties provided by CFM combined with the good electrical properties of the resins make the molded parts attractive for applications like electrical apparatus (high voltage), transportation & automo-tive industries and infrastructuresequipments.

YF International BV Fiber Glass is made from recycled glassfiber.

3B Fiberglass DS 7720-14P is designed to reinforce polyacetals POM resins with glass fiber. Its sizing has been developed specifically for POM and presents good properties in term of chemical and hydrolysis resistance. DS7720-14P has been developed in order to help reinforced plastics to meet the requirements of the most common food contact norms: EC 10/2011 and FDA Its very light color allows this product to be used in any natural grade compounds without impacting the color of the final part.An innovative manufacturing technology provides DS7720-14P chopped strand with an excellent bulk density. As a result, this product exhibits very good feeding properties compared to other competitive glass fiber materials.

3B Fiberglass DS 1128-10N is designed to reinforce a broad range of polyamide resins, including PA6, PA66, PA610, PA6/66 copolymers and semi-aromatic PA.When molded this product exhibits outstanding dry mechanical proper-ties, excellent hydrolysis/glycolysis resistance, high heat aging resis-tance and no sensitivity to mold release agents commonly used, such as calcium stearate. It can also reinforce and offer excellent perfor-mances in all impact modified and flame retardant polyamide formula-tions. An innovative manufacturing technology provides DS 1128-10N chopped strand with an excellent strand integrity and bulk density. As a result this product exhibits ex-cellent feeding properties with very low fuzz generation.The product is also designed for use in pneumatic conveying system and high throughput compounding line.

3B Fiberglass DS 2200-10P is a 10 μm filament diameter, 4 mm long chopped glass fiber designed for production of high performance polyolefin compounds.DS 2200-10P shows outstanding compatibility with Polypropylene and enables improvements of material’s performances such as tensile and flexural strength, impact and creep, hence opening new design possibili-ties for lighter parts. DS 2200-10P is also designed for parts weathering in prolonged contact with water, deter-gents and glycol DS 2200-10P can also be used in applications complying with strin-gent requirements of food contact and drinkable water standards EC 10/2011, FDA, BfR and ACS. DS 2200-10P is supplied on a pel-letized form and offers outstanding feeding-to-extruder behavior as well as excellent fiber impregnation and dispersion.DS 2200-10P’s sizing chemistry also requires reduced amount of cou-pling agents to reach parts’ optimum mechanical performances.

3B Fiberglass CM 4020 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CFM products contain an insoluble binder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl, ester, epoxy and polyurethane resin systems. The CM 4020 mat is ideally suited for injection molding RTM and S-RIM processes. The CM 4020 mat has a high rigidity which helps to work with large CFM cuts without loosing _x005F_x001f_bres. The ex-cellent mechanical properties provided by CM 4020 combined with the good electrical properties of the resins make the molded parts attractive for applica-tions like the electrical apparatus (high voltage), transportation and automotive industries, infrastructures equipments.

3B Fiberglass DS 8800-11P is a glass chopped strand specifically designed to rein-force high performance thermoplastic polymers, including PPS, PES, PSU, PPSU, PEI and PEEK. Furthermore, it shows interesting benefits in reinfor-cing PBT resins. 3B’s state-of-the-art manufacturing technology provides to DS 8800-11P very good strand integri-ty and bulk density leading to smooth compounders feeding, with low fuzz generation. DS 8800-11P displays excellent dis-persion within a large range of resin viscosities, enabling high glass fiber contents (> 55%). It is known for final reinforced parts’ heat stability and high mechanical properties combi-ned with hydrolysis/glycolysis perfor-mances that are rated from high to even outstanding specifically in PPS. DS 8800 -11P also meets stringent requirements of food contact and drinkable water standards such as EC 10/2011, FDA, BfR and ACS.

Owens Corning SE4849 single-end Type 30™ roving represents a compelling solution for Compounders seeking improved productivity through increased line speed, and the potential for higher glass loadings made possible with excellent dispersion. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Compatible with Polyolefins: PP, PE and HDPE resin systems.

468A roving is used in filament winding, pultrusion and weaving applications in epoxide resin systems. The direct rovings can be used to manufacture pipes, tanks and other insulations.

3B Fiberglass M8615 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane cou-pling agent and the layers held together with a suitable binder.The CFM products contain an insolublebinder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl ester, epoxy and polyurethane resin systems. The M8610 mat is ideally suited for injection molding, RTM and S-RIM processes for molding complex parts. The M8615mat version, with its high rigidity, helps to work with large CFM cuts without loosing _x005F_x001f_bres. The excellent mechanical properties provided by CFM combined with the good electrical properties of the resins make the molded parts attractive for applications like electrical apparatus (high voltage), transportation & automo-tive industries and infrastructuresequipments.

3B Fiberglass CR 2080 consists of multiple continuous strands of smaller tex made from 3B E-CR glass wound onto a bobbin shape without mechanical twist and is free from static electricity generation.Choppable Roving CR2080 is silane sized and specifically designed for Sheet Molding Coumpound (SMC) application. SMC Rovings find appli-cations in automotive parts, sectional panel tanks, electrical items.2080 conforms to BS 14020 and IS 11320.

3B Fiberglass CM6060 is a non-wo-ven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CM 6060 & CM 6065 family products contain an insoluble binder compatible with a large range of thermoset matrices like both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester (UP), vinyl ester (VE), epoxy (EP) Both CM 60606 and CM 6065 mats are characterized by their white color and are ideally suited for pultrusion pro-cesses for wide, long and heavy parts but as well for narrow and complex pro_x005F_x001f_les. The excellent mechanical properties provided by 3B CFM combined with the good electrical properties of the resins make the pultruded parts attractive for the electrical apparatus (high voltage), transportation industries and infrastruc-tures equipments.

3B Fiberglass M 8643 is a non-woven mat made out of E-CR glass filaments, consisting of continuous fibers randomly oriented in multiple layers. The glass fiber is bonded with a silane coupling agent and the layers held toge-ther with a suitable binder. The M 8643 products contain an inso-luble binder compatible with a large range of thermoset matrices like both unfilled or filled unsaturated polyester (UP), vinyl ester (VE), epoxy (EP) and polyurethane (PU) resin systems. The M 8643 emulsion mat is ideally suited for pultrusion processes for wide, long and heavy parts but also for narrow and complex profiles. The excellent mechanical properties provided by 3B CFM combined with the good electrical properties of the resins (i.e. UP) make the pultruded parts attractive for the electrical apparatus (high voltage), trans-portation industries and infrastructure equipments.

Microglass® glass flakes ® comes in scale-like glass flakes. Utilizing its own proprietary technology, NSG Group is the only manufacturer of glass flakes in Japan. Two types of glass are used for glass flakes E®, namely, C glass and E glass. C glass contains alkali components and has high acid resistance. E glass contains almost no alkali and so, it has high stability in resin and no electrical conductivity. For each type, NSG Group also offers surface treatment to improve compatibility with resins.

3B Fiberglass DS 1135-10N is designed to reinforce a broad range of polyamide resins, including PA6, PA66, PA610, PA6/66 copolymers and semi-aromatic PA. The product has been developed in order to help reinforced plastics to meet the requirements of the most common food contact and drinkable water norms (FDA, EC 10/2011, BfR and ACS).Its chemistry presents an excellent compatibility with flame retardant additives and impact modifiers.The performance in hydrolysis/glycolysis resistance is also very good.Therefore, the fiber is enhancing dry-as-molded and long-term properties, in a large range of natural and colored formulations.Finally, DS1135-10N is a multi-compatible chopped strand PA, with excellent strand integrity and bulk density.

3B Fiberglass M8630 is a non-woven mat made out of ECR glass _x005F_x001e_laments, consisting of continuous _x005F_x001e_bres randomly oriented in multiple layers. The glass _x005F_x001e_bre is bonded with a silane coupling agent and the layers are held together with a suitable binder. The M8630 family products contain an insoluble binder compatible with a large range of thermoset matrices like both un_x005F_x001e_lled or _x005F_x001e_lled unsaturated polyester, vinyl ester, epoxy and polyurethane resin systems. The M8630 emulsion mat is ideally suited for matched metal die molding, RTM and S-RIM processes for molding _x005F_x001f_at, large and heavy panels or non complex parts. The excellent mechanical properties provided by 3B CFM combined with the good electri-cal properties of the resins make the molded parts attractive for applications like electrical apparatus (high voltage), transportation industries and infrastruc-tures equipments.

3B Fiberglass DS 1125-10N is designed to reinforce a broad range of polyamide resins, including PA6, PA66, PA610, PA6/66 copolymers and semi-aromatic PA.When molded this product exhibits outstanding dry mechanical properties and no sensitivity to mold release agents commonly used, such as calcium stearate. Its sizing has been designed in order to offer excellent dispersion properties. It can also reinforce and offer excellent performances in all flame retardant and impact modified polyamide formulations. Thanks to its very light color, this product can be used in any natural grade compounds without impacting the color of the final part. An innovative manufacturing techno-logy provides DS 1125-10N chopped strand with an excellent strand integrity and bulk density. As a result this product exhibits excellent feeding properties with very low fuzz generation.

3B Fiberglass WS 6050 is designed to rein-force gypsum wallboards with glass fiber.Its sizing has been specifically deve-loped to enhance gypsum adhesion to glass fiber, to provide outstanding fiber dispersion and distribution in gypsum slurry and superior flowabi-lity of the fiber. As a result, this product exhibits very good feeding properties to deliver a dosing flow consistency, and to drastically improve fire resistance and mechanical properties of the gypsum boards.

3B Fiberglass CM6065 is a non-wo-ven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CM 6060 & CM 6065 family products contain an insoluble binder compatible with a large range of thermoset matrices like both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester (UP), vinyl ester (VE), epoxy (EP) Both CM 60606 and CM 6065 mats are characterized by their white color and are ideally suited for pultrusion pro-cesses for wide, long and heavy parts but as well for narrow and complex pro_x005F_x001f_les. The excellent mechanical properties provided by 3B CFM combined with the good electrical properties of the resins make the pultruded parts attractive for the electrical apparatus (high voltage), transportation industries and infrastruc-tures equipments.