Products in Other Parts & Components: Polyether Ether Ketone (PEEK)

WR® 300 is a carbon-fiber reinforced compression molded PEEK™ often selected by pump manufacturers and users for pump bushings and case or impeller wear rings. Maximum service life is achieved in clean. lubricated and/or moist environments.WR 300 allows the pump user to increase pump effiency by running tighter wear ring clearances while decreasing potential pump damage when pumps are cavitated or experience radial bearing failures.

Nemcon™ E PK DP104 is a carbon fiber-reinforced polyetheretherketone, characterized by very high strength, stiffness, consistent moldability, and exceptional thermal resistance.

Glass filled PEKTRON PEEK 1030 has increased strength, good creep resistance, and is not conductive.

G.S.F. Plastics 1207 is a Carbon Fiber/Graphite/PTFE Lubricated Polyetheretherketone (PEEK).

FIL-A-GEHR® PEEK MG (MEDI) is a high performance filament based on the material PEEK and is suitable for medical and pharmaceutical applications in direct body contact with tissue, bone, skin and mucous membrane up to 24 hours. They have been tested and evaluated by independent, accredited test laboratories and meet the following biocompatibility requirements: – ISO 10993-1/5/12/18 and USP Class VI.

GEHR PEEK® can be used at very high temperatures (about +260 °C) and it shows an extraordinary mechanical strength, toughness, hardness, flexural strength, torsional strength. PEEK exhibits excellent chemical resistance, very good dielectric properties up to +260 °C and a very good resistance to all kinds of radiation (even ultraviolet rays only lead to a slight yellow discolouration). PEEK is self-extinguishing properties according to UL 94.

fluteck™ K308 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.

Carbon filled PEKTRON PEEK 2030 is conductive, has excellent strength, and good creep resistance.

AFT Fluorotec AF802 Glass Fiber filled Peek is a glass fiber reinforced semi-crystalline very high-performance engineering thermoplastic for extremely demanding applications.

PEKTRON PEEK 1000 has high elongation, is ductile with no springing issues, and has great impact strength.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

Z-PEEK is one of the strongest polymers on the planet. It has strength-to-weight ratio comparable to stainless steel and exceptional thermal properties. The material can withstand thermal-cycling in vacuum chambers used for space-qualification tests, radiation, or wear in over 22 million cycles in PEEK-steel gear pairs working at 1600 rpm.

AFT Fluorotec AF804 Carbon Fiber filled Peek is a carbon fiber reinforced semi-crystalline very high performance engineering thermoplastic for extremely demanding applications.

Semi-crystalline high-performance plastic with targeted improved sliding properties through the addition of solid lubricants. The excellent Properties of pure PEEK are enhanced by the Additives are not adversely affected and remain Receive.

AFT Fluorotec AF801 Virgin PEEK material is a semi-crystalline thermoplastic typically used as a replacement for machined metals in a wide variety of high performance end-use applications.

Manifattura Cattaneo PEEK is a semi-crystalline thermoplastic is based on polyetheretherketone resin, is a technologically advanced material and exhibits a particular combination of remarkable mechanical properties, temperature resistance and excellent chemical resistance.

WR® 525 is a thermoplastics composite consisting of carbon fiber in a PEEK™ matrix. WR provides excellent chemical resistance, non-galling and nonseizing properties, impact resistance and thermal shock and hydrolysis resistance.WR 525 allows the pump user to increase pump efficiency by running tighter wear rings clearances while decreasing potential pump damage when pumos are cavitated or experience down-line bearing failures.

G.S.F. Plastics 1201 is a Glass Fiber Filled Polyetheretherketone (PEEK).

G.S.F. Plastics 1202 is a Unfilled Polyetheretherketone (PEEK).

Greene, Tweed's Arlon® 1000, a tough, hig temperature, semi-crystalline thermoplastic, offers a unique combination of mechanical, thermal and chemical propertier. Arlon 1000 features superior compressive strength and minimum creep, as well as broad chemical resistance. Arlon is an excellent choice for applications such as valve seats and bushings greater abrasion resistance and lower wear and better fatigue properties than other thermoplastics.

Luvocom® 3F PEEK CF 9676 BK Filament is a 15% carbon reinforced PEEK (Polyether Ether Ketone) with extraordinary characteristics in terms of mechanical, thermal and chemical resistance. PEEK with carbon is used in demanding industries like oil and gas, automotive, mechanical engineering, aircraft and aerospace technologies. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts.

GEHR PEEK® MG (MEDI) is produced at a continuous operating temperature of this high-performance plastic ranges between approximately -40° C and +260° C. It features an extraordinary combination of very high rigidity, hardness, tensile strength and bending strength (high toughness and fatigue strength), high heat deflection temperature and excellent resistance to disinfectants and detergents. The hydrolytic stability is exceptionally high, so that repeated sterilization in steam is possible without any problems. PEEK is self-extinguishing according to UL94 specifications. The raw materials used meet the requirements of FDA and EU 10/2011 for food contact materials.

Semi-crystalline high-performance plastic with very good sliding properties and very good mechanical Properties even under thermal stress. In addition, PEEK is characterized by a excellent chemical resistance.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PO DP117/X2 is a thermally conductive polyetheretherketone, offering excellent chemical resistance, good stiffness and high HDT. It should be used in demanding applications where thermal management must be accomplished in harsh environments.

OpteSTAT™ master batches are Ovation Polymers' line of nano-compounds based on carbon nanotubes. Our proprietary dispersion technology debundles and disentangles carbon nanotubes without compromising their integrity. OpteSTAT™ compounds exhibit good conductivity at minimal nanotube loadings, achieving exceptional cleanliness and physical property retention.OpteSTAT™ NC PK 8010 is PEEK-based carbon nanotube compound. The material resistivity can be tailored to the application, while retaining the physical and thermal properties of the base polymer.Target applications include components of disk drives, business machines or other electronic assemblies where ESD control is required while retaining exceptional cleanliness, dimensional control and physical properties.

fluteck™ K303 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

PBY Plastics PB30201R is a compression molded 30% carbon fiber filled PolyEtherEtherKetone (PEEK).

Nylacast Peek is a high performance engineering thermoplastic. It is very strong and rigid. The characteristics of PEEK show that it has the highest tensile strength in the plastics family. It can be used on a continuous basis in temperatures of 480°F (250°C) without any loss of its properties.

fluteck™ K304 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

fluteck™ K301 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK)

GEHR PEEK® MOD (GLIDE) is reinforced with 10 % of each PTFE, graphite and carbonfibre. The very good friction, wear and tear properties makes this material the good choice for many applications with friction.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PA DP117/X3 is a thermally conductive polyetheretherketone, offering excellent chemical resistance, good stiffness and high HDT. It should be used in demanding applications where thermal management must be accomplished in harsh environments.

fluteck™ K300 PEEK is a high performance thermoplastics polymers based on unreinforced Polyetheretherketone (PEEK).

OpteSTAT™ master batches are Ovation Polymers' line of nano-compounds based on carbon nanotubes. Our proprietary dispersion technology debundles and disentangles carbon nanotubes without compromising their integrity.OpteSTAT™ MB PK 8000 is Polyetheretherketone based carbon nanotube compound. This master batch is easy to blend and disperse using injection molding, and extrusion processes while retaining the physical, structural, and thermal properties of the base polymer.Target applications include components of structural, electronic assemblies/components where ESD/Anti-Stat control is required while retaining exceptional cleanliness, dimensional control and physical properties.