Products in Other Parts & Components: Laminate

Canevasite® FF-5964 is composed of phenolic fabric matrix and cotton fabric reinforcement. It appears in brown color with PF CC 204 LE Standards.

VOLTIS® Hgw 2072 (PF GC 201) is a Phenolic/glass filament fabric for electrical applications under high temperatures, flame resistant.

MICAM M7 is a medium weave melamine glass-fiber laminate.

Atlas Fiber Grade XXX Phenolic Sheet is a paper base phenolic laminate with good mechanical properties, high dielectric strength, and good resistance to moisture. Grade XXX is our most economically priced grade and is recommended for most mechanical applications, for use at radio frequencies, and in high humidity situations. Grade XXX is the electrical grade paper phenolic.

VOLTIS® Hgw 2082 (PF CC 201) is a Viscoplastic material used for mechanical application.

ISOVAL® TU 21/FR4 (EP GC 21) is made up of Flame-resistant, halogen-free round rolled epoxy glass fabric laminate tube with high strength for mechanical and electrical applications

Lamitex® XX PF CP 23 paper/phenolic laminated sheet and tubes offer high dielectric and very good mechanical strengths. Grade XX laminate and tubing are frequently specified for use in transformers, switchboards, mounting blocks, insulating panels, washers and spacers, and switchgear applications.

ISOVAL® 11 HKB (EP GC 306 & 308) is a High tracking resistance (CTI 600) glass filament fabric, construction material in electric appliances and switchgear, especially for applications where surface contamination occurs, Thermal Class H (180 °C). It an epoxy-glass-hard fabric made of a glass fabric, impregnated with a special, tracking current-resistant epoxy resin. This gives the material excellent heat resistance and chemical resistance.

VOLTIS ME® (MF GC 201) is a Tracking resistant laminate with melamine-resin-impregnated glass fabric, for mechanical and electrical applications. Low flammability.

ISOVAL® TU 22 (EP GC 22) is a Round rolled epoxy glass fabric laminate tube with high strength even C at elevated temperature for mechanical and electrical applications.

Inbord® M is a Phenole/melamine laminate having a tracking resistant decorative surface. INBORD® M is generally a mechanical grade and for lower electrical requirements (low voltage applications up to 1000 volts). The core meets PF CP 201 according IEC 60893 and Hp 2061 according DIN 7735. Thickness of the melamine laminate 0,1 mm. The temperature Index is E (120°C).

Versitex® VR3 is a cost-effective thermoplastic composite backed by a thin sheet of fabric to helppromote adhesion of injected or poured foam systems. These high impact resistant panels are comprisedof polypropylene resin reinforced with continuous bi-directional glass fibers. Versitex resists rot, corrosion,mildew, and is not affected by cleaning-related chemicals. Versitex VR Series panels provide significantenergy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. Thebi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitexis easily repaired by applying low heat.

Atlas Fiber Grade XX Phenolic Sheet is a paper and resin based phenolic suitable for general purpose electrical applications. XX is the mechanical grade paper phenolic. Grade XX machines well and is easily used in punch part applications. Grade XX like all paper based phenolic is noted for it's smooth texture.

Beijing New Friend Insulation Material F890H_H grade halogen - free is free flame retardant with leakage resistant laminates.

45NK is a woven Kevlar® aramid fiber reinforced multifunctional epoxy laminate and prepreg systemengineered to provide in-plane CTE values as low as 6 ppm/°C for compatibility with leadless alumina ceramic chip carriers (LCCC's) and other low expansion SMT devices where control of laminate expansion is critical for solder joint reliability. 45NK exceeds the requirements of IPC 4101/50 (Type AFG).

ISOVAL® A (EP GC 201) is made With glass filament fabric for test adapters in printed circuit testing equipment. This gives the material a heat resistance up to 120 ° C, a very good chemical resistance. The high permanent temperature resistance of 155 ° C ensures good dimensional accuracy for use as an adapter plate. A layer of fine fabric in conjunction with a special resin results in the smooth surface and thus enables the finest holes.

ACG® 600 T23 is composed of epoxy resin and synthetic fabric reinforcement.

Lamitex® X PF CP 21 paper/phenolic laminated sheet is primarily intended for mechanical applications. It has high relative mechanical properties but low electrical characteristics when compared to XX and XXX type materials. Special precautions must be taken to prevent cracking if the material is to be tapped or machined parallel to the laminations. Grade X laminate is frequently specified for use as mounting blocks or panels, washers and spacers.

Versitex® VR2 is a cost-effective thermoplastic composite backed by a thin sheet of fabric to helppromote adhesion of injected or poured foam systems. These high impact resistant panels are comprisedof polypropylene resin reinforced with continuous bi-directional glass fibers. Versitex resists rot, corrosion,mildew, and is not affected by cleaning-related chemicals. Versitex VR Series panels provide significantenergy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. Thebi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitexis easily repaired by applying low heat.

VOLTIS® Hgw 2083 (PF CC 203) is a Viscoplastic material for mechanical application and finely machined parts.

MICAM EM42 is a limited fire hazard laminate which is a glass-fiber reinforced epoxy resin composite material. It is produced by a high temperature and high pressure process which produces a high strength void-free laminate suitable for a range of applications including electrical insulation and building construction applications.

Versitex® VR1 is a cost-effective thermoplastic composite backed by a thin sheet of fabric to helppromote adhesion of injected or poured foam systems. These high impact resistant panels are comprisedof polypropylene resin reinforced with continuous bi-directional glass fibers. Versitex resists rot, corrosion,mildew, and is not affected by cleaning-related chemicals. Versitex VR Series panels provide significantenergy absorption over traditional FRP panels and exhibit thermal expansion similar to aluminum. Thebi-directional nature of Versitex provides consistent physical properties throughout the entire panel. Versitexis easily repaired by applying low heat.

ISOVAL® 11 (EP GC 203 & 308) is made With glass filament fabric, for electric appliances and transformers, high flexural strength at elevated operating temperatures, Thermal Class H (180 °C)

MAGNOVAL® consists of magnetic slot wedges in high voltage machines, Thermal Class F (155 °C) and Thermal Class H (180 °C).

VOLTIS® Hp 2061.5 (PF CP 202) is a High electric strength in oil, used in high voltage range at power frequencies.

Von Roll Isola AR 600 P 01 is composed of epoxy resin and aramid fabric reinforcement.

ISOVAL® FR4-HF (EP GC 202) is made of Flame-resistant, halogen-free glass fabric laminate Type FR4, without any toxic flame retardants, UL 94 listed, Thermal Class H (180 °C). The resin is also extremely low in smoke and free of all toxic or harmful flame retardants.

INBORD® EGS is a phenole/melamine laminate having a Tracking index CTI 600 for switchgear with improved safety in case of arcing, with additional glass cloth reinforcement.

ISOVAL® RKB-FR is a Tracking resistance of CTI 600, glass roving fabric laminates, for insulating partitions in switchgear, flame resistant, Thermal Class F (155 °C).

ISOVAL® TM (EP GC 203 & 308) is made With glass filament fabric, high-quality construction material for a wide variety of high-temperature applications, Thermal Class H (180 °C).

VOLTIS® Hp 2061 (PF CP 201) is a Highest mechanical strength, good electric properties at normal humidity.

VOLTIS® Hgw RO 41 (PF CC 41) is a Round molded phenolic fine weave cotton fabric laminate rod with high toughness for mechanical applications, excellent machinability.

VOLTIS® Hgw 2082.5 CE (PF CC 202) is a Viscoplastic material used for mechanical and electrical application.

INBORD® E is a phenol / melamine laminate with a creepage-resistant, decorative surface and good mechanical and dielectric properties as well as sufficient arc resistance. The core is similar to PF CP 203 according to IEC 60893 or Hp 2061.6 according to DIN 7735. The thickness of the melamine layer is approx. 0.25 mm. The insulation class is E (120 ° C).

VOLTIS® Hgw RO 42 (PF CC 42) is a Round molded phenolic cotton fabric laminate rod with high toughness for mechanical applications.