Products in Other Parts & Components: Lawn Equipment

POM copolymer unreinforced, medium viscosity, UV stabilized

POM copolymer unreinforced, medium viscosity, laser-inscribable

POM copolymer unreinforced, low viscosity, laser-inscribable

MELOPAS® MP 180 is a Cellulose-reinforced molding compounds based on melamine resin & melamine

CP-Polymer Technik Wellamid® 22LN2-N is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® 22LN2-N: Flame Rated.Typical application of Wellamid® 22LN2-N: Automotive

KEBABLEND / WR 01/2120 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebablend® / WR 04/1310/2115 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.

PA12 functional compound for the production of plastic-bonded magnets

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

BARLOG plastics GmbH Kebablend® / WR 01/2420 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a high elongation at break.

BARLOG plastics GmbH Kebablend® / WR 01/2202 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material has medium strength and a very high elongation at break.

POM copolymer unreinforced, medium viscosity, antistatic

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

POM-I, POM copolymer unreinforced, medium viscosity, impact modified

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

POM copolymer unreinforced, very low viscosity

POM-I, POM copolymer unreinforced, medium viscosity, impact modified, reduced emissions for automotive interior applications

PA12, functional compound for the production of plastic-bonded magnets. Due to the high degree of filling with rare earths, KEBABLEND / M 48/67 PA12 enables the injection molding of very powerful magnets.

PPS-GF40, linear PPS, 40% glass fiber reinforced

KEBABLEND / WR XB 111001/5 is a special compound based on POM, which has very good sliding behavior and high wear resistance.

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

PA6 functional compound for the production of plastic-bonded magnets

PPS-MD60, linear PPS, 60% mineral filled, good surface quality

Functional compound for the production of plastic-bonded magnets based on EEA

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

PA12 functional compound for the production of plastic-bonded magnets

POM-MD30, POM copolymer, medium viscosity, 30% mineral-reinforced

POM-MD30, POM copolymer unreinforced, medium viscosity, 30% mineral-reinforced

BARLOG plastics GmbH Kebablend® / WR 01/1125/2110 is a special compound based on POM that combines high strength and rigidity with good sliding behavior and high wear resistance.

POM copolymer unreinforced, medium viscosity

PPS functional compound for the production of plastic-bonded magnets

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

BARLOG plastics GmbH Kebablend® / WR XB 111001/2 is a special compound based on POM, which has very good sliding behavior and high wear resistance. The material is also characterized by noise-dampening properties.

POM-CF20, POM copolymer, medium viscosity, carbon fiber reinforced, electrically conductive