Products in Other Parts & Components: Good Processability

NYCO6 438 Nylon is general-purpose low viscosity injection-molding grade Nylon 6 that exhibits excellent melt fluidity, good toughness, stiffness, and strength.

BRUGGOLEN® P1507 is an effective flow enhancer for polyamides in the form of polymeric granules. Improved flow and outstanding mechanical properties: Outstanding melt flow; significantly longer spiral-flow filling No influence on mechanical properties (modulus of elasticity, tensile strength, elongation, and impact strength is retained) Better processability of glass-fiber-reinforced polyamides Offers advantages for injection-mold processing, such as shorter cycle times, lower energy consumption, use of highly complex part designs Easy to dose and disperse

ESD J2330 belongs to ESD Polystyrene Series with Anti-static, High mechanical strength, Static dissipative and Good toughness.

ProPolymers PPS 20GF is a 20 % fiberglass reinforced polyphenylene sulfide compound that offers a superior combination of mechanical, electrical, and thermal properties. PPS is inherently flame resistant with low smoke emission. It provides outstanding processability and chemical resistance.

BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylenes-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Tensile Strength, High Reprocessable Valves - seals, Grommets, Under Hood Applications

Loyblend TA-1000 is a general purpose PCIABS polymer alloy. This grade offers high impact resistance, high rigidity and high heat resistance.

ProPolymers PEI 2100 is a 10% glass filled polyetherimide that offers a superior combination of mechanical, electrical, and thermal properties. PEI is inherently flame resistant with low smoke emission. It provides outstanding processability and good chemical resistance.

Emulprene 1778R is a cold emulsion styrene-butadiene copolymer, polymerized using fatty acid and rosin acid as emulsifier, coagulated by salt-acid system and it is extended utilizing 37.5phr of naphthenic oil and meets the European directive 2005/69/EC.

Farsoon Technologies FS 3401GB produce parts with high mechanical properties and good abrasive resistance. Farsoon considers material to part of its core competency. Farsoon’s experienced material department has independently developed a portfolio of polymer materials for additive manufacturing. In addition Farsoon’s fully capable material manufacturing is able to vertically control the production of the material from raw material to finished product, ensuring quality and stability. With excellent color stability, oxidation resistance, Farsoon polymer materials produce high quality parts which provide both detailed surface precision and high mechanical properties. In addition Farsoon partners with many material suppliers to bring new and advanced materials to the users through Farsoon’s open material policy.

Durable polyamide (nylon) material for real-world physical testing and functional use.Applications Complex, thin-wall ductwork Functional prototypes that approach end-use performance properties Appropriate for low-to-mid-volume rapid manufacturing Medical applications requiring USP Class VI compliance, or biocompatibility Motorsports Aerospace Housing and enclosures Impellers and connectors Consumer sporting goods Vehicle dashboards and grilles Snap-fit designs Parts requiring machining or joining with adhesives Features Excellent surface resolution and feature detail Easy-to-process Compliant with USP Class VI testing Compatible with autoclave sterilization Good chemical resistance and low moisture absorption Benefits Nicely balanced mechanical properties and processability Build prototypes that withstand functional testing Produce durable end-use parts without tooling Create accurate and repeatable parts as demanded by manufacturers Machinable and paintable for demonstration parts

Neoplast™ 180 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

PPS-SG303E41 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

Neoplast™ 180 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Badamid® B70 by Bada AG is comprised of Polyamide 6. It is commonly used It is available in Granules form.

Emulprene 10140 is a product manufactured by mixing a cold styrene –butadiene copolymer containing 5.5% bound styrene (80%) with high styrene resin latex (20%), coagulated by salt– acid system and stabilized with a non-staining antioxidant.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H ES DP110/X3 is a thermally conductive polycarbonate alloy, combining good thermal conductivity with improved HDT and processability relative to conventional polycarbonate compounds.

Product Information: BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylene-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Tensile Strength, High Reprocessable Valves - seals, Grommets, Under Hood Applications Processing Method: * Injection Molding Ozone resistance, Superior

Neoplast™ 155 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 173 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Badamid® B70 SM-Z2 by Bada AG is comprised of Polyamide 6. It is commonly used It is available in Granules form.

Neoplast™ 173 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

PPS-SG301A65 is a 30% glass fiber reinforced linear polyphenylene sulfide compound developed to provide toughness,high flow,temperature and chemical resistant and excellent processability

Neoplast™ 145 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Badamid® B70 GF30 by Bada AG is comprised of Polyamide 6. It is commonly used It is available in Granules form.

ProPolymers PEI 1010 is a high flow, general purpose polyetherimide that offers a superior combination of mechanical, electrical, and thermal properties. PEI is inherently flame resistant with low smoke emission. It provides outstanding processability and good chemical resistance.

BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylenes-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Reprocessable Valves - seals, Grommets, Under Hood Applications Ozone resistance, Superior

Product Information: BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylene-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Tensile Strength, High Reprocessable Valves - seals, Grommets, Under Hood Applications Processing Method: * Injection Molding Ozone resistance, Superior

Emulprene 1732 is a copolymer styrene-butadiene, cold emulsion polymerized used fatty acid as emulsifier, coagulated by salt – acid system and it is extended utilizing 32.5phr of naphthenic oil.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PC DP113/X5 is a thermally conductive, electrically insulating polycarbonate compound, combining good thermal conductivity with high HDT and good processability.

Paracril OZOM50 is a pre-fluxed blend of NBR/PVC containing 30% PVC.

Emulblack 1606R is a black masterbatch based on cold polymerized emulsion SBR, aromatic oil and carbon black.- SBR 100 pts - HAO 10 pts - Carbon Black N330 52 pts

GRODNAMID PA6-HBK150-GF30PW is glass filled polymer composite material.

Nemcon™ H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon™ H PC DP105/X3 BK is a black colored, thermally conductive polycarbonate compound, combining excellent thermal conductivity with high HDT and good processability.

Badamid® B70 GF50 by Bada AG is comprised of Polyamide 6. It is commonly used It is available in Granules form.

ProPolymers PPS 40GF is a 40 % fiberglass reinforced polyphenylene sulfide compound that offers a superior combination of mechanical, electrical, and thermal properties. PPS is inherently flame resistant with low smoke emission. It provides outstanding processability and chemical resistance.