Products in Printed Circuit Boards (PCBs): Resins, Binders & Matrix ...

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ 1750 is a very low viscosity Bisphenol F-type liquid epoxy resin. It can be used in sealants, casting agents and adhesives in electrical and electronic applications and fiber reinforced plastics, and for liquid underfill and adhesives for semiconductor manufacturing.FeaturesChemical, heat and water resistanceElectrical insulation*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). Benefits Excellent adhesiveness Maintains high electrical reliability Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Applications Electrical and electronic applications Potting & encapsulation materials Adhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jER™ YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on). BenefitsExcellent adhesivenessGood elastic recovery FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)Low viscosityApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Esschem MMA - BMA Bead Copolymers are a range of copolymers combining methyl methacrylate (MMA) with butyl methacrylate (BMA).These copolymers offer a versatile solution with varying properties based on the MMA and BMA content. Higher MMA content results in copolymers with elevated glass transition temperatures, melting points, and tensile strengths, making them suitable for applications that require strength and rigidity. Conversely, increased BMA content lowers these properties while enhancing processability and potential flexibility.By adjusting the molecular weight, Esschem can tailor the copolymer structure to achieve specific rigidity requirements. Additionally, controlling the particle size allows for improvements in mechanical strength, with smaller particles offering larger surface area to volume ratios.

Esschem incorporates sustainable plant-based plasticizers into methyl methacrylate MMA bead polymers. These innovative additives are designed to enhance the flexibility and workability of methacrylate-based polymers. By incorporating bio-plasticizers into MMA bead copolymers, the resulting materials exhibit increased flexibility and reduced glass transition temperature, melting points, and tensile strengths.The inclusion of higher molecular weight components contributes to stronger and more heat-resistant materials.Furthermore, the particle size plays a crucial role in surface properties, where smaller particles enhance adhesion while larger particles contribute to robustness and rigidity.

Esschem MMA - IBOMA Bead Copolymers are a range of copolymers that combine methyl methacrylate (MMA) with isobornyl methacrylate (IBOMA).These bead copolymers offer exceptional strength and performance for a wide range of industries. With their high glass transition temperature, melting point, and tensile strength, they provide incredibly strong polymers that meet demanding application requirements.By controlling the molecular weight, Esschem ensures that the copolymer beads exhibit enhanced strength and rigidity. Furthermore, the performance characteristics, including adhesion, can be tailored by optimizing the particle size.

Esschem MMA - AMA Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) with allyl methacrylate (AMA). These copolymers showcase the unique characteristics of AMA as a crosslinker in polymers. With varying MMA and AMA concentrations, Esschem offers a wide range of copolymer beads with different properties. Higher MMA content in the copolymer results in elevated glass transition temperatures, melting points, and tensile strengths, making them ideal for applications requiring high strength and rigidity. On the other hand, increasing the AMA content lowers these properties while enhancing crosslinking and hardness. By adjusting the molecular weight, Esschem can further customize the copolymer's rigidity and crosslinking behavior. The particle size of the beads can also be modified to optimize processing and surface properties, including adhesion characteristics.

Esschem EMA Bead Copolymers are a range of bead polymers synthesized from ethyl methacrylate (EMA) that offers the strength of polymethyl methacrylate (PMMA) with slightly different properties.The copolymers exhibit a slightly lower glass transition temperature, resulting in a softer and more flexible final product compared to PMMA.By controlling the molecular weight, Esschem can customize the heat resistance and strength of the polymer, making it suitable for various applications across multiple industries.The smaller particle size of the beads enhances surface properties like adhesion, while larger particles contribute to a more robust and rigid material.

Esschem EMA - EHMA Bead Copolymers are a unique combination of ethyl methacrylate (EMA) and 2-ethylhexyl methacrylate (EHMA) that offers exceptional properties.The incorporation of 2-EHMA disrupts the polymer chain packing, resulting in lower glass transition temperatures and enhanced low-temperature flexibility, while significantly improving transparency.With variations in molecular weight, Esschem can further enhance the strength and flexibility of these bead copolymers. The smaller particle size of the beads improves processability and has the potential to enhance transparency, while larger particles contribute to a more rigid material.

Esschem MMA - Styrene Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) and styrene. These bead copolymers offer a wide array of properties and applications. With increased MMA content, the resulting materials exhibit remarkable strength and transparency. Conversely, a higher proportion of styrene enhances hydrophobicity, hardness, and impact resistance. The molecular weight plays a crucial role in determining the characteristics of the copolymers. Higher molecular weights, often associated with increased styrene content, yield stronger and more heat-resistant materials. Esschem's ability to manipulate the molecular weight distribution allows for customized properties such as durability, elasticity, and processing ease. Additionally, the particle size of the copolymers influences surface properties and rigidity.

Esschem MMA - HPMA Bead Copolymers are a versatile range of copolymers combining methyl methacrylate (MMA) with hydroxypropyl methacrylate (HPMA). These bead copolymers offer exceptional performance and customizable properties for various applications. With increased MMA content, these copolymers exhibit elevated glass transition temperatures, melting points, and tensile strengths, providing enhanced strength and durability. Conversely, higher HPMA content improves adhesion and reduces glass transition temperatures, melting points, and tensile strengths, offering flexibility and tailored characteristics. Esschem further enhances the molecular weight of these copolymers, resulting in more rigid and durable materials. By manipulating the particle size, solubility, dispersion properties, and transparency can be optimized, making them ideal for applications that demand transparency, strength, and toughness.

Esschem EMA - EGDMA Bead Copolymers are a versatile combination of ethyl methacrylate (EMA) and ethylene glycol dimethacrylate (EGDMA). With a higher proportion of EMA, these copolymers exhibit enhanced flexibility due to the less bulky ethyl group present in EMA. Conversely, increasing the EGDMA content results in a more crosslinked structure, leading to greater rigidity. The glass transition temperature remains relatively stable regardless of the percentage of each constituent. By precisely controlling the molecular weight, Esschem can optimize the level of crosslinking, resulting in superior mechanical properties such as hardness and tensile strength. Additionally, the particle size can be tailored to influence surface area and reactivity, allowing for further adjustment of the physical properties.

Esschem MMA - EMA Bead Copolymers are a range of bead copolymers combining methyl methacrylate (MMA) with ethyl methacrylate (EMA). These copolymers exhibit high glass transition temperatures, melting points, and tensile strengths, making them ideal for industries that demand strength and rigidity. By increasing the EMA content, the copolymers offer greater flexibility and the potential for enhanced optical properties. This results in lower glass transition temperatures, melting points, and tensile strengths, providing desired flexibility and transparency. Esschem provides control over the molecular weight to further enhance these properties, allowing for a more rigid and robust copolymer or targeting flexibility and transparency as needed. Particle size control enables fine-tuning of processability and adjustment of surface properties, leading to better performance in applications that prioritize transparency.

Esschem MMA Bead Copolymers are a collection of methyl methacrylate (MMA) bead polymers renowned for their exceptional properties.These polymers exhibit impressive features such as high glass transition temperature, melting point, tensile strength, and impact resistance.Esschem meticulously controls the reaction conditions to create polymers with specific molecular weight distributions, allowing for a wide range of desired properties. This precise control enhances the inherent strength, rigidity, and impact resistance of MMA polymers.Moreover, by carefully manipulating the particle size, Esschem offers the flexibility to customize properties such as hardness, toughness, and processability.

Homide 400L is a high-performance duroplastic resin system.

HOZOLE is a high-performance duroplastic resin system.

Biresin® CR141 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites.

NORSODYNE® M 28070 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,electric parts through hot press molding,injection molding,rtm method.

DISTITRON® 278 - Unsaturated polyester resin in styrene,Ortophthalic-Neopentylic. It is used to produce bmc and smc manufacture,good superficial appearance through hot press molding method.

DISTITRON® 275 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

OPTIPLUS - Mold construction. Allows high glass fabric content. Infusion processing possible. Suitable for higher temperature applications.. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

Polydyne® 5056 is used for general purpose and gel coat formulation. Main applications areas are composites, eyewear and jewelers, textile industry etc.

ARMORSTAR 30/45 (E) - Thixotropic,preaccelerated,with LSE system

Homide 802L is a high-performance duroplastic resin system.

NORSODYNE® M 01075 - Pure maleic unsaturated polyester resin in styrene. It is used to produce bmc and smc manufacture,good superficial appearance through hot press molding,pultrusion method.

Homide 802 is a high-performance duroplastic resin system.

Biresin® CR131 is an epoxy resin system suitable for the production of high performance fiber reinforced composites parts and molds with thermal properties up to 130°C.

Park’s E-767 is a versatile, low flow, adhesive grade epoxy resin. When impregnated onfiberglass fabric it provides high bond strength at elevated temperatures while maintaining high electrical integrity.

Homide 250 is a high-performance duroplastic resin system.

Polydyne® 6120 is general purpose, preaccelerated, thixotropic with low reactivity. And it is generally used in composites applicatons.

Biresin® CR144 is a three component, anhydride cured, low viscosity epoxy resin system suitable for the production of high performance fi bre reinforced composites.