Products in Printed Circuit Boards (PCBs): Good Thermal Stability

ALBIFLEX® 297 is a bisphenol-A-epoxy-silicone block copolymer resin that excels in crafting high-performance elastomers. This versatile liquid, responsive to epoxy, seamlessly cures when combined with aliphatic and cycloaliphatic epoxy resin curing agents. ALBIFLEX® 297 accommodates various conventional casting and molding techniques for your manufacturing needs.

Rainmaker Polymers ACOTASXXNA1 is an Antistatic Compound. Rainmaker Polymers' Antistat Concentrates dissipate surface charges and eliminate the undesirable effects of static build up.

Flamtard S (zinc stannate) is an insoluble, non-hazardous, antimony-free flame retardant synergist, and is increasingly being used in green applications, particularly in the electronics industry. It is extremely effective in PVC systems for cable sheathing, epoxy resins for printed circuit boards, polyamides and surface coatings. Flamtard S is thermally stable up to 400 °C; at higher temperatures (400 °C - 600 °C) zinc and tin ions exert catalytic activity that inhibits the radical chain reaction causing the flame.

Rainmaker Polymers ACLLAS05NA1 is Antistat PEC. Rainmaker Polymers' Antistat Concentrates dissipate surface charges and eliminate the undesirable effects of static build up. It is a Chemical agent that bloom to the polymer's surface where they react with atmospheric moisture resulting in a microscopic layer of water on the surface that will dissipate the static charge.

HOZOLE is a high-performance duroplastic resin system.

Korton PVDF is a Polyvinylidene Fluoride (PVDF) product. It is available in North America. Applications of Korton PVDF include automotive, electrical/electronic applications, aerospace, bags/liners and coating applications.Characteristics include: Flame Rated Chemical Resistant Corrosion Resistant Fatigue Resistant Heat Resistant

Hebei Jingu Plasticizer HY-B-20 is a kind of slight yellow viscous oily liquid, with viscosity of 325mpa.s, refractive index of 1.473 and density of 0.985. Epoxidized Soybean Oil is not soluble in water, but it is soluble in organic solvent, such as Hydrocarbon, ketone, lipids, higher alcohols, etc. and also slightly soluble in alcohol.

Shouguang Derun Chemistry DRPF006 Premium grade is a kind of efficient flame retardant plasticizer of gathered in phosphate , commonly used in engineering plastics alloys, PPO, HIPS, PC/ABS, PPO/HIPS alloy, rigid circuit board with epoxy resins and other polymer halogen-free flame retardants.Please ask the sales staff for detailed purposes and usage.

Next PPS PPSG65-01BK is Polyphenylene Sulfide Glass Fiber Reinforced Black Compound.

85N is the ultimate polyimide and laminate prepreg system fo PWB's requiring resistance to high temperature, both in process and in end-use applications. Bromine-free chemistry provides Bestin-Class thermal stability for applications with sustained high in-use temperatures as well as for use in lead-free soldering applications.

Next PPS PPSG40AW-02BK is Polyphenylene Sulfide Glass Fiber Reinforced Anti wear Black Compound.

Next PPS PPSG40-02BK is Polyphenylene Sulfide Glass Fiber Reinforced Black Compound.

38N is an improved polyimide low-flow prepreg suitable for bonding multilayer polyimide rigid-flex, attaching heat sinks to polyimide MLBs, or other applications where minimal and uniform resin flow is required.

Virgin Super Modified PTFE is weldable and has lower deformation under load.

Tachyon 100G materials exhibit exceptional electrical properties that are very stable over a broad frequency and temperature range between -55°C and +125°C up to 100 GHz. These electrical properties provide designers a scalable solution for next generation designs of backplanes and daughter cards, enabling 10x improvements from 10 Gb/s data rates. Isola has developed Tachyon 100G with the highest level of thermal performance for high layer count line cards. The very low Z-axis CTE makes it a perfect choice for fine pitch BGA applications of 0.8 mm or less. The material is optimized with the use of spread glass to mitigate skew, improve rise times, reduce jitter, and increase eye width/height and that use ultra smooth HVLP (VLP2) 2um Rz copper that significantly reduces conductor losses.

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

Fluoronoid® FL 100 Grade 1 is a virgin PTFE has a wide range of applications that make use of its extreme chemical resistance, very low coefficient of friction, excellent electrical insulation properties and thermal stability up to 250°C.

Shandong Chuanjun Chemical Diethylene glycol dibenzoate(DEDB)e is a new plasticizer in China. It widely used in PVC products as main plastizer the 1970's abroad. It can replace the dioctyl phthalate and dibutyl ester. Its features include light color, good plasticized capacity, good compatibility , low release, good heat stability, good resistance to freeze , extraction, UV ray, oxidization and volatilization and good electrical performance. It is the cheapest new plasticizer in China.

Hairma Chemical (GZ) Reactive Epoxy Soybean Oil HM-01R can be used for PVC insulated wires and cables, paints, coatings, circuit boards, etc. It has the characteristics of high epoxy value, good compatibility, high resistivity, and high thermal stability.

IS415 is engineered to meet the demands of Lead (Pb) free multilayer printed circuit assembly, deliver CAF resistance with strong IST results and maintain FR-4 processing. IS415 offers good electrical performance, superior chemical and thermal performance and product consistency.

FR406 is engineered to meet the demands of the multilayer printed circuit board industry, while maintaining standard FR-4 processing. FR406 offers improved dimensional control, superior chemical and thermal performance and product consistency.

G200 has Blending Bismaleimide/Triazine (BT) and epoxy resin which provides G200 with enhanced thermal, mechanical and electrical performance over most epoxy materials. G200 possesses performance characteristics that make it an excellent selection for large panel size, high layer count Printed Wiring Boards (PWB).

Virgin PTFE provides a low-friction, non-stick surface suitable for use in high-temperature and high-dielectric applications. PTFE Film and PTFE Sheets are available in roll form or cut to size sheets and can be supplied etched one-side, etched two-side or with a self-adhesive acrylic backing (pressure-sensitive tape).

ZOLTEK’s Type-45 Recycled Chopped Fiber format has high strength and modulus, low density, electrical conductivity, dimensional stability and low thermal expansion.

ZOLTEK’s Type-65 Recycled Chopped Fiber format has high strength and modulus, low density, electrical conductivity, dimensional stability, low thermal expansion.

Next PPS PPSG40-02NC is Polyphenylene Sulfide Glass Fiber Reinforced Natural Compound.