Products in Sensors & Actuators: Polyolefins

MOCOM Compounds ALTECH® PP-B A 2030/150 GF30 CP is a heterophasic copolymer made of polypropylene and 30% glass fibers, coupled together chemically and easy to remove. It is heat and processing stable, and is suitable for injection molding with melt temperatures of 200-250°C and mold temperatures of 20-70°C. It is most commonly used for automotive purposes such as functional components, powertrain parts, housings, fixing elements, interior and exterior decoration and finishing. To ensure optimal results, it should be pre-dried in a dry air (dessiccant) dryer or air circulating dryer at temperatures of 80-120°C for 2-4 hours.

MOCOM Compounds ALTECH® NXT PP -H A 2035/450.02 GF35 CP is a polypropylene homopolymer containing 35% glass fibers which is chemically coupled, heat stabilized for high temperature applications, and provides high stiffness and toughness. It is suitable for pre-drying in an air circulating dryer at 80-120°C for 2-4 hours or in a dry air (desiccant) dryer at 80-120°C for 2-3 hours, and for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is typically used in the automotive market segment for a variety of injection molded parts.

MOCOM Compounds ALTECH® PP-H A 2030/100 GF30 is a Polypropylene Homopolymer with 30% glass fibers filler/additive system for various injection molded parts, featuring high stiffness, heat stabilization, slip agent and easy release (demolding). During processing, injection molding should be done using a melt temperature of 200-250°C and a mold temperature of 20-70°C. After processing, the parts should be stored in a dry, light-protected location at a temperature not exceeding 30°C to ensure their quality.

SAHARA C 300HT is a polypropylene impact copolymer with optimized balance of stiffness and toughness, and high impact strength even at low temperature. Typical customer applications are injection molding of washing machine tubs, electrical appliance parts, housewares and thin walled packaging.

Starflam MX06089 is an Unfilled Flame Retardant Polypropylene Injection Molding Grade

PP GF/MF reinforced

Starflam MX05036 is an Unfilled, Halogen Free Flame Retardant, PP Injection Molding Resin

Starflam M10004A is an Unfilled Halogen Free Flame Retardant PP Injection Molding Resin

PP GF/MF reinforced

Starflam M10009A is an Unfilled Flame Retardant Polypropylene (Homo) Injection Molding Resin

Starflam MF0044 is an Halogen Free Flame Retardant, Glass Fiber Reinforced, PP Injection Molding Resin

Special compound for 3D effect painting based on PP, e.g. B. For decorative applications in the automotive exterior.

Starflam MX06101 is an Unfilled, Halogen Free Flame Retardant PP Injection Molding Resin

Starflam M10009AP is an Unfilled Flame Retardant high fluidity Polypropylene (Homo) Injection Molding Resin

Starflam M10009XP is an Unfilled Flame Retardant Polypropylene (Copo) Injection Molding Resin, also

Starflam MX05075 is an Unfilled Halogen Free Flame Retardant PP Injection Molding Resin

PP GF/MF reinforced

PP GF/MF reinforced