Products in Sensors & Actuators: Housings

SABIC's Specialties Business NORYL GTX830 resin is a 30% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 8200 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX830 resin is an excellent candidate for a wide variety of applications including automotive under the bonnet applications and water meter housings. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ SE1GFN2 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL™ SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.

SABIC's Specialties Business NORYL™ PX5373 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL™ SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.

SABIC's Specialties Business LNP™ STAT-KON™ ZJK20I is a static dissipative CNT compound based on polyphenylene ether (PPE) + polystyrene (PS) resin with low particulate count and good high heat properties. This material is an excellent candidate for IC tray, Wafer cassette and Slider tray parts in the semiconductor industry.

ELASTOSIL® CAT UV is a room-temperature curing silicone rubber (RTV-2) that can be used as an organometallic catalyst for addition-curing two-part silicone rubber grades. This versatile product enables fast UV curing at room temperature while maintaining a long pot life.

Stanyl® TW241F12 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. A suitable processing technology for the product is injection molding. Special features include good or high flow and heat stabilization.

ForTii® F11 is a breakthrough high-temperature polyamide that offers halogen-free and halogen-containing flame retardant grades, making it suitable for demanding applications in industries such as electronics, lighting, automotive, white goods, industrial, and aerospace. It provides an excellent balance of flow, toughness, and stiffness, enabling the production of thin walls or complex geometries in electronics and electrical applications. The material is VDE (Verband der Elektrotechnik) approved for all colors, has a high RTI electrical rating of 140 °C at 0.75 mm, and a CTI rating of 800 V, ensuring thermal and electrical performance. It is phosphorous-free and VDE-certified. The processing technology for this product is injection molding.

Arnite® TV4 260 S is a high-performance engineering plastic known for its impressive combination of high strength, rigidity, and excellent processing characteristics. These qualities make it highly suitable for a wide variety of applications in the automotive, electrical, electronic, and consumer goods sectors.

MOCOM Compounds ALTECH® PP-B A 2030/150 GF30 CP is a heterophasic copolymer made of polypropylene and 30% glass fibers, coupled together chemically and easy to remove. It is heat and processing stable, and is suitable for injection molding with melt temperatures of 200-250°C and mold temperatures of 20-70°C. It is most commonly used for automotive purposes such as functional components, powertrain parts, housings, fixing elements, interior and exterior decoration and finishing. To ensure optimal results, it should be pre-dried in a dry air (dessiccant) dryer or air circulating dryer at temperatures of 80-120°C for 2-4 hours.

MOCOM Compounds TEDUR® L 9105-1 is a Polyphenylene Sulfide base polymer with 30% glass fiber filler/additive system. It is designed for automotive and machinery applications and is known for its high toughness and stiffness. During processing with injection molding, the melt temperature should be between 320-340°C, and the mold temperature should be greater than 140°C.

MOCOM Compounds TEDUR® L 9401-1 is a Polyphenylene Sulfide base polymer containing 40% glass fibers and 5% PTFE. It has improved sliding/wear and high stiffness properties, making it suitable for the Automotive, Machinery, and other market segments. Typical applications include bearings and sliding elements, as well as functional components.

MOCOM Compounds ALCOM® PA66 910/32.1 TCE5 is a polyamide 66 base polymer with a special filler and additive system that provides thermal and electrical conductivity, as well as heat stabilization. It is mainly used for automotive, machinery, electrical and electronic, and lighting applications like electrical components, radiator systems, and cooling systems such as housings and functional components. To ensure optimal performance, it should be pre-dried at 80°C in a dry air (dessiccant) dryer for 2-12 hours, with a maximum moisture content of 0.12%. For injection molding, the melt temperature should be between 300-320°C and the mold temperature should be between 100-130°C.

MOCOM Compounds ALCOM® PA66 910/32.1 GF8 TCE8 is a polyamide 66 base polymer with a special filler/additive system, including 8% glass fibers, thermal conductive, electrically conductive, and heat stabilized. It is commonly used in the automotive, machinery, electrical and electronic, and lighting industries, and typical applications include housings and functional components. Processing injection molding requires a melt temperature of 300-320°C and a mold temperature of 100-130°C.

MOCOM Compounds ALTECH® PA6 A 2030/109 GF30 is a Polyamide 6 polymer with 30% glass fibers heat stabilized and easy release (demolding) filler/additive system. It is suitable for injection molding with a melt temperature of 270-290°C and a mold temperature of 80-100°C. This material is suitable for multiple market segments, such as automotive, machinery, building and construction, and is typically used for injection molded parts, exterior parts, interior decoration/finishing, engine and drive systems. To ensure its optimum performance, it should be stored in a cool, dry place, and not exposed to temperatures above 30°C.

MOCOM Compounds ALCOM® PA66 910/32.1 TCE2 is a special filler-based polyamide 66 with thermal and electrical conductivity, as well as heat stabilization, making it suitable for applications such as electrical components, radiator systems, cooling systems, housings, and functional components. For injection molding, the melt temperature should be 300-320°C and the mold temperature should be 100-130°C. This product is suitable for the automotive, machinery, electrical, electronic, and lighting markets.

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

Duresco NU 6110 T/NU 6110 V is a Glass fiber reinforced epoxy molding compound with very good mechanical properties for high temperature applications.

ESTOPLAST EP 1500NNO2 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

ESTOPLAST EP 1500GY166 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

ESTOPLAST EP 2015BB01 is a Polybutylene Terephthalate - Glass fiber reinforcement, which is 15% used in interior parts of automotive as well as in bobbins, E-motor components, lightings and lamp fittings.

ESTOPLAST EP 1500GY165 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

Duresco NU 3723 N is a Glass fiber reinforced epoxy molding compound with high temperature resistance and very good dimensional stability.Excellent chemical resistance.

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

BARLOG plastics GmbH Kebaflex® / SG 85 FR A.01 black is a product for the production of flexible, flame-retardant components. It has a Shore hardness of 88 A and achieves V0 classification from a wall thickness of 3.0 mm based on the UL 94 test standard.

ESTOPLAST EP 1500WW06 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

PBT unreinforced, injection molding type, low viscosity

PBT unreinforced, highly impact modified

ESTOPLAST EP 1500BB11DP is a Polybutylene terephthalate unfilled congruous for extrusion applications like OFC, rods, tubes, fibers.

POM copolymer unreinforced, medium viscosity

PBT + PCT, unreinforced, increased heat resistance, impact modified

POM copolymer unreinforced, highly viscous for injection molding and extrusion processing

ESTOPLAST EP 1500GY117 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

ESTOPLAST EP 1500-E is a Polybutylene terephthalate - unfilled which is high viscosity material suitable for extrusion/injection molding grade.

TPE-S, Shore A80, filled, suitable for EMC-appropriate shielding of electromagnetic fields

BARLOG plastics GmbH Kebablend® / WR FE 161104 is a special compound based on ABS, with improved sliding and wear behavior as well as low noise when friction is paired with plastic elements.