Products in Sensors & Actuators: Good Thermal Stability

SILRES® K is a solution of a condensation-curing methyl silicone resin in toluene. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® K is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® K has a very low carbon content and thus yields a high ash content when pyrolized. Composites made of SILRES® K show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® K also provides water repellency and excellent electrical insulation properties to the respective composite materials.

SILRES® MK Flakes is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® MK Flakes is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® MK Flakes has the lowest carbon content of all WACKER silicone resins and thus yields a very high ash content when pyrolized. Composites made of SILRES® MK Flakes show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® MK Flakes also provides water repellency and excellent electrical insulation properties to the respective composite materials.

SILRES® MK Powder is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Additionally, SILRES® MK Powder is the ideal product for making tack-free prepregs with excellent storage stability. When fully cured, SILRES MK POWDER has the lowest carbon content among all WACKER silicone resins, resulting in a high ash content when pyrolized. Composites made of SILRES® MK Powder exhibit long-term stability against weathering, moisture, and UV light. They can be continuously exposed to changing climatic conditions, UV radiation, and temperatures exceeding 300 °C (572 °F). Furthermore, SILRES® MK Powder provides water repellency and excellent electrical insulation properties to the composite materials.

Nanoxo Quantsil is an innovative quantum dots containing silicone-based clear and transparent elastomer possessing luminescent and UV filter properties. Quantsil is supplied as a two-part set i.e., the base elastomer (component A) and the curing agent (component B).

Nanoxo Quantsil is an innovative quantum dots containing silicone-based clear and transparent elastomer possessing luminescent and UV filter properties. Quantsil is supplied as a two-part set i.e., the base elastomer (component A) and the curing agent (component B).

BRUGGOLEN® H3386 is a mixture of copper-complex-based antioxidants and synergists. It is used for the retention of natural polyamide color after conditioning. This product is particularly suitable for the stabilization of polyamides against thermal aging, chemical attack, or aggressive weathering conditions. Powerful long-term stabilization/ natural colors Excellent UV stabilization Very effective dispersion

Duresco NU 6110 T/NU 6110 V is a Glass fiber reinforced epoxy molding compound with very good mechanical properties for high temperature applications.

ESTOPLAST EP 1500NNO2 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

MECHETEC® PVDF (Polyvinylidene Fluoride) is a non-reinforced highly crystalline fluoropolymer that combines exceptional chemical resistance with superior strength and stability. When compared with traditional fluoropolymers like PTFE, MECHETEC® PVDF offers up to three times the typical strength and stiffness while maintaining unparalleled resistance to even the harshest chemicals—even at temperatures up to 300°F. These properties, along with its natural flame retardency (UL94, V-0) and ultrahigh purity have made it the material of choice for processing equipment components used in semiconductor manufacturing clean room environments. Because it also offers excellent toughness and electrical properties that remain stable over a wide range of both frequencies and temperatures, MECHETEC® PVDF is also often used in components used for power transmission. MECHETEC® PVDF is offered in two grades; MECHETEC® PVDF 740 (beige) and MECHETEC® PVDF 1010 (white). Both grades machine easily and are available in a full range of heavy gage rod and plate sizes. Formally known as Uninar PVDF.

BESTNYL® SC00VI01AWX is a polyamides (PA). Polyamide is a technical plastic characterized by having good mechanical properties, excellent rigidity, good stabilization at high temperatures and good chemical resistance.

BESTNYL® SC00VI02AH15 is a polyamides (PA). Polyamide is a technical plastic characterized by having good mechanical properties, excellent rigidity, good stabilization at high temperatures and good chemical resistance.

BESTNYL® SC30VI02BMU is a polyamides (PA). Polyamide is a technical plastic characterized by having good mechanical properties, excellent rigidity, good stabilization at high temperatures and good chemical resistance.

ESTOPLAST EP 1500GY166 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

ESTOPLAST EP 2015BB01 is a Polybutylene Terephthalate - Glass fiber reinforcement, which is 15% used in interior parts of automotive as well as in bobbins, E-motor components, lightings and lamp fittings.

ESTOPLAST EP 1500GY165 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

Duresco NU 3723 N is a Glass fiber reinforced epoxy molding compound with high temperature resistance and very good dimensional stability.Excellent chemical resistance.

MECHETEC® PSU (Polysulfone) is an amorphous high performance thermoplastic material that has proven performance at elevated temperatures. Good mechanical properties along with thermal stability allow for its use in load bearing applications over broad temperature ranges. Other notable attributes include flame retardant, excellent radiation resistance, and good chemical resistance. The ability of MECHETEC® PSU to withstand common sterilization techniques supports its use in numerous sanitary applications such as medical instruments and food processing machinery. MECHETEC® PSU stock shapes are amber in color and semi-transparent. They machine easily and are available in a full range of heavy gage rod and plate sizes. Formally known as Unifone PSU.

ESTOPLAST EP 1500WW06 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

EMFutur EM100001 is noted for its mechanical and thermal properties. The raw material – graphite – is chemically processed to obtain monolayer flakes of graphene oxide.

ESTOPLAST EP 1500BB11DP is a Polybutylene terephthalate unfilled congruous for extrusion applications like OFC, rods, tubes, fibers.

Duresco NU 461 R is a Epoxy molding compound with excellent thermal shock and chemical resistance for high temperature applications.

ESTOPLAST EP 1500GY117 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

ESTOPLAST EP 1500-E is a Polybutylene terephthalate - unfilled which is high viscosity material suitable for extrusion/injection molding grade.

Fluoronoid® FL 100 Grade 1 is a virgin PTFE has a wide range of applications that make use of its extreme chemical resistance, very low coefficient of friction, excellent electrical insulation properties and thermal stability up to 250°C.

ESTOPLAST EP 1500WW5DP is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

ESTOPLAST EP 1500GY164 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

ESTOPLAST EP 1500BB01 is a Polybutylene terephthalate unfilled congruous for extrusion applications like OFC, rods, tubes, fibers.

ESTOPLAST EP 1500GY15 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

Silopren™ LSR 7005 liquid silicone rubber is a two-component, high-transparency, low-hardness, low-viscosity, fast-cure speed and ultra clear liquid silicone rubber (LSR). Providing good optical clarity, Silopren™ LSR 7005 liquid silicone rubber combines typical LSR properties, such as high temperature stability and flowability, with excellent UV and blue light stability. As a result, optical parts produced using this material can exhibit excellent durability and maintain optical clarity, even if exposed to high temperatures or UV light. The very low hardness and low modulus help enable easy assembling and coupling of molded optical elements. Silopren™ LSR 7005 liquid silicone rubber is designed to be processed through LSR injection molding technology, which can help to produce high precision optical parts even in large quantities at a high efficiency.Key Features and Typical Benefits Optical Clarity Durability Design Freedom Potential Applications Optical interfaces Rain light sensors Camera systems Optical sensors Other transparent applications.

ESTOPLAST EP 1500GY11 is a Polybutylene terephthalate unfilled congruous for extrusion applications like OFC, rods, tubes, fibers.