Products in Terminal Blocks, Plugs & Sockets: Electrical Components

SABIC's Specialties Business LNP THERMOCOMP RF0057E compound is based on Nylon 6/6 resin containing 25% glass fiber. Added features of this grade include: Non-Brominated & Non-Chlorinated Flame Retardant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business ULTEM™ Resin 2210R is a 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217°C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business 20% Glass fiber filled, super high flow polyetherimide(PEI) (TG 217degC) with internal mold release and balance properties with flow and ductility, ECO conforming, UL94 V0 listing.

SABIC's Specialties Business ULTEM™ Resin SF2270 is a 20% Glass fiber filled, super high flow (highest flow) polyetherimide(PEI) (Tg 217°C) with internal mold release, ECO conforming, UL94 V0 listing.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL GTX4610 resin is a 10% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This high performance injection moldable grade has a UL 5VA flame rating, non-brominated / non-chlorinated FR package, UL746C Outdoor Suitability rating of F1, excellent chemical resistance, high heat resistance, and flow. NORYL GTX4610 resin is an excellent candidate for a wide variety of electrical applications including connectors, sockets, sensors, terminal blocks, and insulator components. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

High flow ULTEM for thin wall application

LNP LUBRICOMP JD4901 compound is based on Polyetherimide (PEI) resin containing 20% glass fiber, 10% PTFE. Added features of this grade include: Wear Resistant.

SABIC's Specialties Business NORYL PX9406P resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm and V0 at 0.75mm. NORYL PX9406P is VDE certified IEC60335 and offers strong electrical performance at thin wall, high heat resistance, Low Warpage, low moisture absorption, and dimensional stability. This material is an excellent candidate for unattended appliance applications such as printed circuit board (PCB) holders, terminal blocks + connectors, circuit protection / relay / switches, motor end caps, control box / panels, and battery charger / fuse holders where VDE IEC60335 is required. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL SE1GFN3 resin is a 30% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL SE1GFN3 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business NORYL™ SE1GFN2 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL™ SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.

SABIC's Specialties Business NORYL™ PX5373 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL™ SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.

SABIC's Specialties Business VALOX™ ENH3500 is an unreinforced, non-chlorinated/brominated flame retardant Polybutylene Terephthalate (PBT) injection moldable grade with excellent chemical resistance. It has a UL94V0@0.80mm flame rating. This is a good candidate for a variety of applications needing a sustainable FR PBT solution.

SABIC's Specialties Business LEXAN ML6411 polycarbonate (PC) siloxane resin, is a high flow opaque injection molding (IM) grade with very low temperature ductility characteristics. This grade offers UL94 V0 @ 1.5mm and 5VA @ 3.0mm flame retardancy based on non-chlorine, non-bromine FR systems. LEXAN ML6411 resin offers excellent processing characteristics with opportunity for shorter IM cycle times compared to standard PC. This product is available in a wide range of opaque colors and is an excellent candidate for a wide range of electrical applications.

SABIC's Specialties Business NORYL™ N190 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F1. NORYL™ N190 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. *This grade is also referred to as NORYL™ N1900 in several regions.

SABIC's Specialties Business NORYL™ N1900 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 3mm and V0 at 1.5mm along with UL746C Outdoor Suitability rating of F1. NORYL™ N1900 resin exhibits high impact strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches. *this grade is also referred to as NORYL™ N190 in several regions.

MOCOM Compounds ALTECH® ECO PC 1000/542 FR UV is a polycarbonate base polymer with special features including UV stabilization, easy release (demolding), and flame retardant. It contains recycled material and is suitable for electrical and electronic applications, such as housings, plugs/connectors, and functional components.

MOCOM Compounds ALCOM® LD2 PC 1000 17150 UV GY2240-08 is a polycarbonate base polymer with special features such as impact modification, UV stabilization, and the inclusion of recycled material with light scattering capabilities. It is used in electrical and electronic, lighting, and various exterior parts, fixtures/fittings, and electrical component applications such as housings, lamps, sockets, and more.

MOCOM Compounds ALTECH® ECO PC 1000/121 UV IM is a polycarbonate-based impact-modified, UV-stabilized plastic containing recycled material. It is suitable for the electrical and electronic, lighting, and various market segments and is typically used to produce housings, lamps, sockets, and various exterior parts and fixtures/fittings.

MOCOM Compounds ALTECH® PA66 A 1000/517.01 IM is a heat-stabilized, easy-release, and easy-flow polyamide 66 that is adhesion-modified to PVC. It is commonly used in applications such as plugs/connectors, housings, and various automotive powertrain parts in the automotive, electrical, and electronic market segments. For injection molding, the melt temperature should range between 270-290°C and the mold temperature between 40-80°C. The product should be stored in the dark and kept at no more than 30°C.

MOCOM Compounds ALTECH® PA6 A 2030/516.01 GF30 IM is a polyamide 6 with 30% glass fibers filler/additive system. It is suitable for injection molding with melt temperatures of 270-290°C and mold temperatures of 80-100°C. It has easy release (demolding), impact modified, injection molding grade, heat stabilized, nucleated and processing stabilized special features. It is typically used in automotive, electrical, and electronic markets for exterior parts, interior decoration/finishing, and electrical components applications such as housings, functional components, and plugs/connectors. Pre-drying conditions should be 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on the moisture content, with a maximum moisture content of 0.15%.

CS series™ XPF0100S is a cross-linked polystyrene in highly spherical fine powder form. These cross-linked polystyrene particle materials exhibit high clarity, hardness, heat resistance and dimensional stability. CS Series™ cross-linked polystyrene materials are manufactured using TWO H Chem Ltd. Proprietary process technology.

Mineral loaded Copolymer PP. For SDS, please contact Addiplast Group using the 'Request Document' button.

Pure high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = 38 micron, D100 = 70 micron.

PLASMER® 1050DB/DN is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1050DB/DN is a fully crosslinked product and can be reused without scrap during processing.

ESTOPLAST EP 1500NNO2 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

ESTOPLAST EP 1500GY165 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

PLASMER® 1055BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1055BM/NM is a fully crosslinked product and can be reused without scrap during processing.

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

PLASTOMER® 1070B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASTOMER ® 1070B/N is a fully crosslinked product and can be reused without scrap during processing.

ESTOPLAST EP 2015BB01 is a Polybutylene Terephthalate - Glass fiber reinforcement, which is 15% used in interior parts of automotive as well as in bobbins, E-motor components, lightings and lamp fittings.

ESTOPLAST EP 1500GY166 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

PBT, 20% glass fiber reinforced, flame retardant (V0 at 0.8 mm; halogen free), hydrolysis-resistant

PLASMER® 1025BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1025BM/NM is a fully crosslinked product and can be reused without scrap during processing.

PLASMER® 1035BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1035BM/NM is a fully crosslinked product and can be reused without scrap during processing.

ESTOPLAST EP 1500GY117 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

PLASTOMER® 1075B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER® 1075B/N is a fully crosslinked product and can be reused without scrap during processing.