Products in Terminal Blocks, Plugs & Sockets: Lawn Equipment

SABIC's Specialties Business NORYL™ PX5373 resin is a 20% glass fiber reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2mm and V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL™ SE1GFN2 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter/charger, indoor and outdoor electrical enclosures / housings / connectors, and wall plates / sockets / switches.

SAHARA C 300HT is a polypropylene impact copolymer with optimized balance of stiffness and toughness, and high impact strength even at low temperature. Typical customer applications are injection molding of washing machine tubs, electrical appliance parts, housewares and thin walled packaging.

PBT unreinforced, injection molding type, approved for use in contact with food

PBT-GB30, PBT, 30% glass balls

PBT unreinforced, highly impact modified

PBT + PC, PBT / PC blend, unreinforced, impact resistant, reduced tendency to warp

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

PBT-GF15 FR, PBT, 15% glass fiber reinforced, flame retardant

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant, halogen free

PBT-GF20 FR, PBT, 20% glass fiber reinforced, flame retardant

PBT, 20% glass fiber reinforced, flame retardant (V0 at 0.8 mm; halogen free), hydrolysis-resistant

PBT-GF30, PBT, 30% glass fiber reinforced

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant

PPS-GF40, linear PPS, 40% glass fiber reinforced

PPS-MD60, linear PPS, 60% mineral filled, good surface quality

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

linear PPS, 40% glass fiber reinforced, impact resistant

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

PBT-GF20, PBT, 20% glass fiber reinforced

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

PBT-GF15, PBT, 15% glass fiber reinforced

linear PPS, 30% glass fiber reinforced, impact resistant

PBT-M40, PBT, 40% mineral

PBT unreinforced, flame retardant

PBT unreinforced, injection molding type, also suitable for extrusion, highly viscous

linear PPS, 30% glass fiber reinforced, impact resistant, hydrolysis stabilized

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

PBT-GF20 FR, PBT, 20% glass fiber reinforced, flame retardant, hydrolysis stabilized

linear PPS, 20% glass fiber reinforced, laser weldable, natural

PPS-GF30, linear PPS, 30% glass fiber reinforced, impact resistant, approved for food applications according to EU and FDA guidelines.

PBT unreinforced, injection molding type, low viscosity

PBT + PCT, unreinforced, increased heat resistance, impact modified

PPS-CF, PPS carbon fiber reinforced