Products in Terminal Blocks, Plugs & Sockets: High Temperature Resis...

SABIC's Specialties Business ULTEM™ Resin 2210R is a 20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217°C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business 20% Glass fiber filled, super high flow polyetherimide(PEI) (TG 217degC) with internal mold release and balance properties with flow and ductility, ECO conforming, UL94 V0 listing.

SABIC's Specialties Business ULTEM™ Resin SF2270 is a 20% Glass fiber filled, super high flow (highest flow) polyetherimide(PEI) (Tg 217°C) with internal mold release, ECO conforming, UL94 V0 listing.This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

High flow ULTEM for thin wall application

SABIC's Specialties Business Transparent, Thermoplastic Polyimide (TPI). Glass transition Temperature (Tg) of 227degC. Haze onset temperature of 212degC (SABIC IP method). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required.

LNP LUBRICOMP JD4901 compound is based on Polyetherimide (PEI) resin containing 20% glass fiber, 10% PTFE. Added features of this grade include: Wear Resistant.

ALPA-LSR 140201 is a liquid silicone rubber product in the SilSo injection molding range that is suitable for use in nearly all industrial applications due to its multifunctional mechanical and chemical properties. They crosslink without any by-products, and when combined with injection molding, these silicones enable fast, high-volume production of tiny components with complex shapes and fine details. Due to their biocompatible, odorless, and good haptic properties, they are the first choice for many medical and orthopedic products. Their high-temperature stability, good insulating properties, and low compression set are advantageous for the industrial processing of seal rings, plug-in connectors, and membranes.

ALPA-LSR 130201 is a liquid silicone rubber product in the SilSo injection molding range that is suitable for use in nearly all industrial applications due to its multifunctional mechanical and chemical properties. They crosslink without any by-products, and when combined with injection molding, these silicones enable fast, high-volume production of tiny components with complex shapes and fine details. Due to their biocompatible, odorless, and good haptic properties, they are the first choice for many medical and orthopedic products. Their high-temperature stability, good insulating properties, and low compression set are advantageous for the industrial processing of seal rings, plug-in connectors, and membranes.

MOCOM Compounds TEDUR® L 9105-1 is a Polyphenylene Sulfide base polymer with 30% glass fiber filler/additive system. It is designed for automotive and machinery applications and is known for its high toughness and stiffness. During processing with injection molding, the melt temperature should be between 320-340°C, and the mold temperature should be greater than 140°C.

MOCOM Compounds TEDUR® R 9519 is a special injection molding grade containing 45% glass fibers and recycled material, making it suitable for applications such as fixing elements and lamp sockets. Pre-drying is required in a dry air (desiccant) dryer at 130-140°C for 2-4 hours, depending on the moisture content. During processing, injection molding should be done with a melt temperature of 320-340°C and a mold temperature of at least 140°C.

MOCOM Compounds TEDUR® L 9511 is a high-stiffness injection molding grade thermoplastic with a base polymer of Polyphenylene Sulfide and a filler/additive system of 45% glass fibers. Its exceptional stiffness makes it suitable for various applications, such as housings and fixing elements.

DAP D62/6130F is a versatile diallyl ortho-phthalate molding compound, with the added benefits of being flame retardant and long-glass fiber filled. It is supplied in flake form, making it convenient for various applications. This compound can be efficiently molded using compression or transfer equipment and is easily preformed for ease of handling. Notably, it maintains its performance when stored at room temperature for up to one year. Additionally, it has successfully passed NASA outgassing tests, indicating its suitability for a range of applications, including those with stringent requirements.

DAP D44/6160 is a mineral-filled, special-purpose diallyl ortho-phthalate molding compound supplied in a free-flowing granular form. It can be easily molded using compression, transfer, or injection equipment and can be readily preformed. It surpasses all mineral compounds available today in terms of mechanical and electrical properties. It boasts extremely low water absorption, high dielectric strength, and a low dissipation factor, along with high tensile strength, exceptional arc resistance, and excellent resistance to high temperatures.

DAP ID-40 is a general-purpose diallyl ortho-phthalate molding compound filled with Orlon. It is supplied in a granular form and can be easily molded using standard compression or transfer equipment. This type of compound is versatile and suitable for various molding applications.

DAP 306 is a general-purpose diallyl ortho-phthalate molding compound filled with Orlon and supplied in flake form. It is suitable for a variety of applications, including switches, terminals, insulators, cups, cases, and other components that require strength as well as chemical and moisture resistance. It can also be used for the encapsulation of electrical and electronic components.

Hot punching general-purpose phenolic grade. Mechanical properties approach those of NP610 with improved electrical properties and moisture resistance. Certification to IEC standard is pending.

A paper-base laminate with low phenolic resin content for hard, flat surfaces. It is typically hot punched for numerous low voltage electrical applications of less than 250 volts where the material is not subjected to high humidity.

Pfluon Chemical 8800FC30 is a abrasion reinforced Wear resistant particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

Pfluon Chemical 8200GF30 is a glass fiber reinforced resin particle,standard viscosity,beige color and capable for plastic forming process like injection, squeeze etc.

Pfluon Chemical 8800G is a pure resin particle,hypocrystalline,standard viscosity and capable for plastic forming process like injection,squeeze etc. It appears in beige color.

Pfluon Chemical 8200FC30 is a abrasion reinforced Wear resistant particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

Pfluon Chemical 8100FP is a resin fine powder with diameter 50um,standard viscosity and capable for pressing mold,compound modication etc. It appears in white color.

Pfluon Chemical 8900GF30 is a glass fiber reinforced resin particle,standard viscosity,beige color and capable for plastic forming process like injection, squeeze etc.

Pfluon Chemical 8800P is a coarse powder with diameter 500um,standard viscosity and capable for plastic injection, squeeze,compound modification etc. It appears in white color.

Pfluon Chemical 8900CF30 is a carbon fiber reinforced resin particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

Pfluon Chemical 8200CF30 is a carbon fiber reinforced resin particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

Pfluon Chemical 8800CF30 is a carbon fiber reinforced resin particle,standard viscosity,black color and capable for plastic forming process like injection, squeeze etc.

Pfluon Chemical 8100G is a pure resin particle,hypocrystalline,standard viscosity and capable for plastic forming process like injection,squeeze etc. It appears in beige color.

Pfluon Chemical 8100P is a coarse powder with diameter 500um,standard viscosity and capable for plastic injection, squeeze,compound modification etc. It appears in white color.

Pfluon Chemical 9000UFP is a resin Ultrafine powder with diameter 20um,standard viscosity and capable for pressing mold,compound modification etc. It appears in white color.

Pfluon Chemical 8200G is a pure resin particle,hypocrystalline,standard viscosity and capable for plastic forming process like injection,squeeze etc. It appears in beige color.

Pfluon Chemical 8800GF30 is a glass fiber reinforced resin particle,standard viscosity,beige color and capable for plastic forming process like injection, squeeze etc.

Pfluon Chemical 8200P is a coarse powder with diameter 500um,standard viscosity and capable for plastic injection, squeeze,compound modification etc. It appears in white color.

Technyl® ORANGE is a brand-new range of fire-resistant products for high-voltage automotive components and cabling in electric vehicles. The new palette of orange pigmented Technyl® grades offers reliable color retention, laser-marking, flame-retardancy, high heat and fatigue resistance. In powertrain electrification systems, parts representing a potential electric shock hazard must be instantly recognizable to alert production line employees, after-sales personnel and car owners. We have adapted our electrical safety polymer offering to meet regional regulations with specific shades of orange to identify these products at first sight.