Products in Building Wires & Power Cables: Ethylene-Propylene Copoly...

SuperOhm® 3768 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

AquaGraft® 7020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

AquaGraft® EPMC-2 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

SuperOhm® 2595 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

SuperOhm® 3450 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

SuperOhm® 3754 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Colorable flame retardant polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, crush, deformation resistance at high temperatures, and superior flexibility.

AquaGraft® EPMC-4 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

AquaGraft® EPMC-16 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

SuperOhm® 3455 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Colorable flame retardant polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV extrusion line. Cables insulated with this compound are recognized for balanced properties including excellent heat, radiation, deformation resistance at high temperatures, and superior flexibility.

AquaGraft® 8020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Aquagraft® 16-6010 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

PEXIDAN® SX505NT pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493 or CM497, in the ratio 95:5. The SX505NT:CM493 or SX505NT:CM497 systems have passed type-tests for use up to and including 36 kV. The graft compound contains a non-staining stabilizer and an effective tree retarder, giving outstanding long term retention of dielectric strength. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.

PEXIDAN® SX554 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493, in the ratio 95:5, or CM497, in the ratio between 90:10 and 93:7.CM493 is a stronger catalyst suitable for wall thicknesses > 1.5mm and CM497 is a weaker catalyst suitable for small conductor sizes, such as 1 to 4 mm2. The system SX554:CM493 or SX554:CM497, has been approved for use at 1kV and has found uses up to 10kV, it is highly flexible and enables the production of soft rubber cables without the use of continuous vulcanization equipment. Crosslinking is obtained by exposure to moist or hot water immersion only.

KEP® 110 produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.

KEP® 020P produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.

A Highly Extendable DCPD Polymer with Heavy Hydrotreated Paraffinic Oil for TPO/TPV and Thermoset Applications

KEP® 530 produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.

GRP EPDM RECLAIM GRP EPS60E is a high quality reclaim manufactured from EPDM factory reject profiles. EPDM Reclaim is one of the most commonly used reclaim rubbers having both general-purpose and specialty applications. It is primarily used in automotive, construction, consumers and mechanical goods applications. The vulcanization properties of GRP EPDM Reclaim make it particularly suitable for a variety of EPDM Rubber products.EPDM Rubber is M-class synthetic Rubber. EPDM stands for ethylene propylene diene monomer (M-class) rubber. EPDM rubber is a terpolymer of ethylene, propylene, and a diene-component. Generally, ethylene content is around 45% to 85% in EPDM Rubber. Higher ethylene content gives the higher the loading possibilities of the polymer, better mixing, and extrusion. The key properties of EPDM are its outstanding heat, ozone, and weather resistance. EPDM rubber have excellent electrical insulating properties. EPDM rubber have also very good resistance to polar substances and steam.

An Ultra Fast Curing Polymer for Sponge and Dense Extrusions

KEP® 2060 produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.