Products in Building Wires & Power Cables: Cable Jacketing

ELASTOSIL® R 510/60 S is a high-consistency silicone rubber (HCR) that cures with peroxide and is specifically designed for manufacturing silicone-insulated cables and wires. It offers excellent performance within a wide temperature range of -55°C to +225°C. This product finds applications in various areas, including cables for household appliances, ignition and battery cables, as well as measurement and control cables.

ELASTOSIL® R 510/70 S is a peroxide-crosslinking, high-consistency silicone rubber (HCR) that is specifically designed for manufacturing silicone-insulated cables and wires. It offers excellent performance within a wide temperature range of -55°C to +225°C. This product finds applications in various areas, including cables for household appliances, ignition and battery cables, as well as measurement and control cables.

ELASTOSIL® R 502/75 OH is a peroxide-crosslinking HCR silicone for the manufacture of silicone-insulated safety cables that maintain circuit integrity. In case of fire, ELASTOSIL® R 502/75 OH forms a ceramic-like layer with high insulation resistance, good mechanical stability, and low smoke formation.

ELASTOSIL R 512/70 OH is a peroxide-curing HCR silicone for the manufacture of silicone-insulated safety cables that maintain circuit integrity. In case of fire, ELASTOSIL® R 512/70 OH forms a ceramic-like layer with high insulation resistance, good mechanical stability, and low smoke formation.

Arnitel® EL250 is a high-performance thermoplastic copolyester (TPC) known for its combination of flexibility, high-temperature resistance, strength, and excellent processing properties. It is an innovative choice, serving as a lighter, more intelligent, and environmentally friendly substitute for traditional rubbers in industries such as automotive and E&E. This contributes to reduced environmental impact and system costs. Arnitel® EL250 is specifically designed for injection molding processes, making it efficient and versatile for manufacturing applications. Importantly, it meets food contact quality standards, ensuring its suitability for applications where food safety is essential.

Securoc® C10 F11.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Securoc® C10 F13.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Securoc® C10 F12.0 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

Securoc® C10 is produced from a carefully selected, naturally occurring, platy sedimentary mineral that consists of partially hydrated magnesium-calcium carbonate. The standardized quality of Securoc® C10 is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Securoc® C10 is a very fine, platy-shaped filler that is flame and smoke retardant. In addition, this product works as an effective acid scavenger in halogen-containing polymers. It provides flame retardancy along with good smoke suppression and char formation, either by itself or in combination with ATH.

THERMODAN® HF TP 543CBU has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

THERMODAN® HF TP519CB has been developed specially to offer good processability, very fast extrusion process with very low die drool.

Charmax™ NH-5000 is a halogen-free intumescent flame retardant with high thermal stability and low water solubility based on synergistic phosphorus and nitrogen chemistries.

Charmax™ Sb-S is a hiqh quality standard grade of Antimony Trioxide used as a flame retardant synergist in plastics, rubber, adhesives and coatings. Charmax™ Sb-S is produced from high purity raw materials under carefully controlled conditions to ensure product quality. This product is 2011 RoHS compliant.

Charmax™ NH-4000 is a halogen-free intumescent flame retardant with high thermal stability and low water solubility based on synergistic phosphorus and nitrogen chemistries.

Charmax™ FS 12 is a non-toxic flame retardant / smoke suppressant based on a micro sized smoke suppressant complex coated onto propriety substrates.

Charmax™ LS Z4AF is a low cost molybdenum-based smoke suppressant synergist for PVC applications. Charmax™ LS Z4AF is specifically designed to reduce smoke in building wire and general purpose wire & cable applications.

Charmax™ FS 70 is a non-toxic flame retardant / smoke suppressant. This product consists of a proprietary blend of multi-functional ingredients, designed to provide increased cost performance versus traditional materials.

THERMODAN® HF TP 543C has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

THERMODAN® HF TP519CBU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.

Charmax™ LS Z20A is a cost efficient molybdenum based smoke suppressant synergist for PVC applications. Charmax™ LS Z20A is specifically designed to reduce smoke in halogenated and other polymers including PVC wire & cable and rigid sheet profiles.

Charmax™ LS Z8AF is a low cost molybdenum-based smoke suppressant synergist for PVC applications. Charmax™ LS Z8AF is specifically designed to reduce smoke in PVC/Rubber Blends, PVC plastisol adhesives, calendered products, PVC wire & cable applications as well as rigid sheet and profiles.

Flamtard V grades are inorganic silicate based flame retardant synergists, chemically modified to control the glass transition temperatures over which they soften (470-500 °C). Above this they convert into a highly viscous molten state in which they can help to reduce the creation and propagation of micro cracks in char formation during polymer combustion. Flamtard V can also improve adhesion of metal oxide residues and oxidized organic materials, leading to mechanically stronger chars. Flamtard V can be used in mica filled silicon based security cables, flame retardant intumescent PVC and PUR materials for the building and construction industry, polyamides and polyolefins. For other polymers, check the potential stability with TGA first. This proven replacement for antimony trioxide can be used alone or in conjunction with other materials in the Flamtard range.

Charmax™ FS BZMA-T is a non-toxic flame retardant / smoke suppressant composed of a micro-sized zinc molybdate complex coated onto magnesium hydroxide with a hydrophobic coating to promote dispersion in various polymer systems.

THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.

Charmax™ AR 57 is designed to eliminate or reduce Antimony Trioxide in flame retardant compounds, for the express purpose of reducing costs, while sustaining performance. Specific use rates will vary by application. For elimination of the price volatility and availability issues: Charmax™ AR 57 does not contain Antimony Trioxide. Charmax™ AR product line are produced from high quality raw material under carefully controlled conditioned to ensure product quality.

THERMODAN® HF TP 543CBT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

Charmax™ FS BZMA is a non-toxic flame retardant / smoke suppressant composed of a micro sized Zinc Molybdate complex coated onto Magnesium Hydroxide.

THERMODAN® HF TP 543COT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.

Neralit® 682.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 682 polyvinyl chloride is designated for products made of hard (unsoftened) PVC. It is especially suitable for the production of pressure pipes and window profiles. Extrusion technology on two-worm machines is suitable for processing the product.

Neralit® 601.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 601 polyvinyl chloride is designated for products made of hard (unsoftened) PVC.Injection, blowing, rolling (calendering) and extrusion technologies are suitable for processing the product.It facilitates the manufacture of transparent products.​.

Indo-Nippon Chemical Di Octyl Phthalate (DOP) is a general-purpose plasticizer. It has good compatibility with PVC, possesses all properties required for PVC processing. It is superior in electrical performance. DOP is used as a plasticizer for PVC cables and wires, floor coverings, adhesives, leather cloth, films, calendars, perfume fixative, nitrocellulose, synthetic and natural rubber, many synthetic and natural resins, drying oils, etc., Indo-Nippon Chemical Co., Ltd. also manufactures DOP - Medical Grade with high purity, with very low free alcohol content, practically free of impurities and odor. DOP of this grade is free of any additives.

Neralit® 652.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 652 polyvinyl chloride is designated for products made of softened and unsoftened PVC. Extrusion, rolling (calendering) and, if applicable, injection technologies are suitable for processing the product.

Neralit® 581.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 581 polyvinyl chloride is designated for products made of hard (unsoftened) PVC. Injection, blowing, rolling (calendering) and extrusion technologies are suitable for processing the product.