Products in Building Wires & Power Cables: Hoses

Millathane® UV is an ultra-violet curable millable polyurethane compound typically used with Millathane® 97, but other Grades can be used as well. Millable polyurethane extrusions can be continuously cured and products molded using UV light without the use of ovens, microwaves or salt bath units. (Patent Pending) These curable compounds can be extruded or calendered onto fabric or as an unsupported sheet and then continuously cured by passing them through a UV-curing conveyor belt chamber. Molded parts can be press-cured using special transparent molds to allow curing with UV light, or can be cured in a UV chamber. Time of irradiation varies with the nature and type of material, the type and concentration of other ingredients, and the type and power of the light source. They are great for extruding hollow tubing and other continuous shapes, such as bars, rods, L-channels, U-channels, square tubing, and the like. It’s great for extruded protective covering over all types of cables, hoses, and protective conduit.

Polybutadiene rubber Synthetic cis-butadiene rubber BR-1243 Nd is a product of polymerization of butadiene in solution in the presence of neodymium catalyst; 1,4-cis — at least 97%; polydispersity — no more 2.85. The polymer is stabilized by non- staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic cis-butadiene rubber SIBUR BR-1243 Nd Grade B (LP) is a product of polymerization of butadiene in solution in the presence of neodymium catalyst; 1,4-cis — at least 97%; polydispersity — no more 2.85. The polymer is stabilized by non- staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic cis-butadiene rubber SIBUR BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic polybutadiene rubber Synthetic cis-butadiene rubber BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic polybutadiene rubber Synthetic cis-butadiene rubber BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic polybutadiene rubber Synthetic cis-butadiene rubber BR-1203 Ti is the polymerization product of butadiene in solution; in the presence of titanium catalyst; 1,4-cis – at least 90%. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Synthetic cis-butadiene rubber BR-1243 Nd HV is a product of polymerization of butadiene in solution in the presence of rare-earth metal-base catalysts with addition of an antioxidant, which contains at least 97% of 1,4-cisbonds. The polymer contains no nitrosamines or substances that may be a source of nitrosamines.

Polsil® GUM 210/65 is a special grade heat cured elastomer with higher thermal resistance.

EKFLEX 882 is a general-purpose, non-phthalate plasticizer based on dioctyl cyclohexanoate (DOCH), featuring high performance and versatility in applications and designed to meet the most varied of domestic and international market needs and requirements in PVC and plastisol compound formulations. Delivering excellent performance, this plasticizer is a direct alternative for replacing phthalate plasticizes.

EKFLEX 983 is a colorless liquid plasticizer based on diisononyl phthalate (DINP) and monomeric isomers thereof, featuring excellent performance, low volatility and outstanding setting properties and used globally to manufacture laminates and sealants for the automotive industry.

EKFLEX 883 is a colorless liquid plasticizer based on diisooctyl phthalate (DIOP) and isomers thereof, featuring excellent performance and providing great value for money.

Neralit® 652.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 652 polyvinyl chloride is designated for products made of softened and unsoftened PVC. Extrusion, rolling (calendering) and, if applicable, injection technologies are suitable for processing the product.

SIVIC® N 700 PX is a carboxylated grade with abrasion resistance.

EKFLEX 1200 plasticizer boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

INNOPRENE 1350 is a product that is already completely cross-linked and there is no need for an extra cross-link process before its ultimate use. Also, it is possible to simplify the processes and reduce the prime cost as it is an environment-friendly material allowing for an easy recycle of scraps resulted from processing.

Ve Chemical N660 plays a crucial role in the rubber industry. They are widely used in tires and rubber products.When used in tires it ensures a high resistance to abrasion, good road handling and aging resistance.Carbon Black is also an important ingredient in the production of a multitude of other rubber goods like profiles, hoses and anti-vibration systems.

Vatan Plastik San. Tic. AS Diotyl Phthalate (DOP) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

SIVIC® 2870 HV is acryonitrile based multipurpose grade polymer with high viscosity, improved abrasion and tear resistance for industrial hose, cable and conveyor belt.

EKFLEX 1300 plasticizer boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

EKFLEX 862 is a non-phthalate plasticizer based on dioctyl adipate (DOA), featuring outstanding performance and efficiency and imparting great flexibility to the plasticized material, even at low temperatures.

EKFLEX 2000 is a non-phthalate plasticizer that boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

SIVIC® 2870 LV is acryonitrile based multipurpose grade polymer with low viscosity for industrial hose, cable and conveyor belt.

Ekflex 8815 is a colorless liquid plasticizer based on diisononyl phthalate (DINP) and monomeric isomers thereof, featuring excellent performance, low volatility and outstanding setting properties and used globally to manufacture laminates and sealants for the automotive industry.

Vatan Plastik San. Tic. AS Dioctyl Adipate (DOA) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Fujipoly Industries 7BN is for general use. It is made by extruding silicone rubber into a tube shape. The standard materials are roughly divided into two types, 7BN type (for general use) which has various standard dimensions.

Ekflex 1081 is a general-purpose, non-phthalate plasticizer based on dioctyl cyclohexanoate (DOCH), featuring high performance and versatility in applications and designed to meet the most varied of domestic and international market needs and requirements in PVC and plastisol compound formulations. Delivering excellent performance, this plasticizer is a direct alternative for replacing phthalate plasticizes.

Puyang Changyu Petroleum Resins TBBS(NS) Powder is a natural rubber, butadiene rubber, isoprene rubber, styrene-butadiene rubber and reclaimed rubber aftereffect accelerator, especially for the strong black rubber containing alkaline material. Safe operating temperature, anti-scorch strong, fast curing, high modulus strength, to improve the use of the proportion of synthetic rubber. Low toxicity and high efficiency, is an ideal alternative NOBS, with excellent performance, is called the standard accelerator. Widely used in the production of radial tires. Amines with aldehydes can, guanidine, thiuram accelerators and use, and scorch retarder PVI when used, constitutes a good vulcanization system. Mainly used in tires, shoes, hose, tape, cable manufacturing.

GRP EPDM RECLAIM GRP EPS60E is a high quality reclaim manufactured from EPDM factory reject profiles. EPDM Reclaim is one of the most commonly used reclaim rubbers having both general-purpose and specialty applications. It is primarily used in automotive, construction, consumers and mechanical goods applications. The vulcanization properties of GRP EPDM Reclaim make it particularly suitable for a variety of EPDM Rubber products.EPDM Rubber is M-class synthetic Rubber. EPDM stands for ethylene propylene diene monomer (M-class) rubber. EPDM rubber is a terpolymer of ethylene, propylene, and a diene-component. Generally, ethylene content is around 45% to 85% in EPDM Rubber. Higher ethylene content gives the higher the loading possibilities of the polymer, better mixing, and extrusion. The key properties of EPDM are its outstanding heat, ozone, and weather resistance. EPDM rubber have excellent electrical insulating properties. EPDM rubber have also very good resistance to polar substances and steam.

INNOPRENE 1450 is a product that is already completely cross-linked and there is no need for an extra cross-link process before its ultimate use. Also, it is possible to simplify the processes and reduce the prime cost as it is an environment-friendly material allowing for an easy recycle of scraps resulted from processing.

SIVIC® 2870 is low acryonitrile based multipurpose grade polymer with good extrudability and cold flex properties for industrial hose, cable and conveyor belt.

Neralit® 601.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 601 polyvinyl chloride is designated for products made of hard (unsoftened) PVC.Injection, blowing, rolling (calendering) and extrusion technologies are suitable for processing the product.It facilitates the manufacture of transparent products.​.

Neralit® 682.0 is suspension polyvinyl chloride (PVC). Suspension NERALIT® type 682 polyvinyl chloride is designated for products made of hard (unsoftened) PVC. It is especially suitable for the production of pressure pipes and window profiles. Extrusion technology on two-worm machines is suitable for processing the product.

Shouguang Derun Chemistry DRPF001 Top grade is used as Flame-retardant plasticizer for plastic ,resin and rubber,Widely for all kinds of soft PVC materials,especially transparent flexible PVC products,such as PVC terminal insulation sleeves, PVC mining air pipe, PVC flame retardant hose, PVC cable, PVC electrical insulation tape, PVC conveyor belt, PVC packing film etc PU foam PU coating NBR, CR Lubricating oil, TPU, PC/ABS, EP, PF ,etc.

Fujipoly Industries 7AV is for heat resistance. It is made by extruding silicone rubber into a tube shape. The standard materials are roughly divided into two types, 7AV type (for heat resistance) which has various standard dimensions.