Products in Data Communication Cables: Polyurethanes (PU)

ISOTHANE 1070A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

ebalta MG 425 is processed on a two-component low pressure device. The systems MG 400 / MG 425 / MG 475 are cured with the hardener PUR 19. By mixing MG 425 with MG 400 the E-modulus can variably between 630 – 1550 MPa. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Nitrocellulose lacquers have a better adhesion on polyurethane surfaces than on acryllacquer- systems. Release agent – please see category release agent

ISOTHANE 1085A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

ISOTHANE 1075A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

ISOTHANE 1065A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

ISOTHANE 1080A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

ebalta MG 321 FR is processed on a two-component low pressure device. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Nitrocellulose lacquers have a better adhesion on polyurethane surfaces than on acryllacquer- systems. As release agent you can use our T 03-01. MG 321 FR beige fire behavior according to UL 94, 3 mm thickness V0 With MG 883 the potlife of MG 321 FR beige can be set up to 120 secs. MG 321 FR-S beige/ black - Approved according to UL 94 - File E191776 Vol. 1 fire behavior based on UL 94, 3 mm thickness V0 and 5VA

Ebalta MG 453 GF is processed on a two-component low pressure device. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Release agent – please see category release agent

ISOTHANE 1090A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

ebalta MG 453 is processed on a two-component low pressure device. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Release agent – please see category release agent

ebalta MG 426 is processed on a two-component low pressure device. After grinding with a sand paper , grit 280, the surface can be varnished with a commercial lacquer. For better adhesion we recommend the use of a primer coat. Nitrocellulose lacquers have a better adhesion on polyurethane surfaces than on acryl-lacquer- systems. Release agent – please see category release agent.