Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Electrical & Electronics
Wire & Cable
Data Communication Cables
Products in Data Communication Cables: Foaming Agent
28 Products found in Data Communication Cables
Filters
Suppliers
Product Families
Functions
End Uses
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
AGC Chemicals Americas, Inc.
Fluon+™ FP-F-FMX1
Functions:
Foaming Agent, Nucleating Agent
Processing Methods:
Gas Assisted Injection Molding, Injection Molding
Carrier:
Resin-based, Fluorinated ethylene propylene (FEP)
Features:
Cost Effective, Light Weight, Low Dielectric Constant
AGC Chemicals Americas, Inc. Fluon+™ FP-F-FMX1 Concentrate is a nucleating agent designed for use in the gas injection extrusion process. It contains a well-dispersed nucleating agent that acts as a site for foaming during the gas injection extrusion process. The concentrate is based on Chemours Teflon® FEP (Fluorinated ethylene propylene) and is supplied in cylindrical pellet form, approximately 0.125 inches long by 0.080 inches in diameter.
AGC Chemicals Americas, Inc.
Fluon+™ High Flow FXM1-9494
Functions:
Foaming Agent, Nucleating Agent
Processing Methods:
Gas Assisted Injection Molding, Injection Molding
Carrier:
Resin-based, Fluorinated ethylene propylene (FEP)
Features:
Cost Effective, Light Weight, High Flow, Low Dielectric Constant
AGC Chemicals Americas, Inc. Fluon+™ High Flow FXM1-9494 Concentrate is a nucleating agent designed for use in the gas injection extrusion process. It contains a well-dispersed nucleating agent that acts as a site for foaming during the gas injection extrusion process. The concentrate is based on Chemours Teflon® FEP (Fluorinated ethylene propylene) and is supplied in cylindrical pellet form, approximately 0.125 inches long by 0.080 inches in diameter.
iD Additives, Inc. - La Grange, IL
ID Additives, Inc. 74837 iD Foam 20 MFC
Functions:
Foaming Agent
Compatible Polymers & Resins:
Styrene Acrylonitrile (SAN), Polypropylenes (PP), Polyethylenes (PE), Polyethylene Terephthalate (PET), Thermoplastic Polyolefins (TPO), Thermoplastic Elastomers (TPE), Polyurethanes (PU), Polystyrenes (PS), Acrylonitrile Butadiene Styrene (ABS), High-Impact Polystyrene (HIPS)
Processing Methods:
Injection Molding, Extrusion Blow Molding (EBM), Film Extrusion
End Uses:
Wires, Rigid Packaging, Flexible Packaging, Cables, Rigid Films, Cosmetic Packaging, Film
Labeling Claims:
Non-Flammable
Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.
iD Additives, Inc. - La Grange, IL
ID Additives, Inc. 71896 iD High Temp Foam MFC
Compatible Polymers & Resins:
Styrene Acrylonitrile (SAN), Polypropylenes (PP), Polyethylenes (PE), Polyethylene Terephthalate (PET), Thermoplastic Polyolefins (TPO), Thermoplastic Elastomers (TPE), Polyurethanes (PU), Polystyrenes (PS), Acrylonitrile Butadiene Styrene (ABS), High-Impact Polystyrene (HIPS)
Functions:
Foaming Agent
Processing Methods:
Injection Molding, Extrusion Blow Molding (EBM), Film Extrusion
End Uses:
Wires, Rigid Packaging, Flexible Packaging, Cables, Rigid Films, Cosmetic Packaging, Film
Labeling Claims:
Non-Flammable
Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.
iD Additives, Inc. - La Grange, IL
ID Additives, Inc. 6851 iD 35 MFC
Functions:
Foaming Agent
Compatible Polymers & Resins:
Styrene Acrylonitrile (SAN), Polypropylenes (PP), Polyethylenes (PE), Polyethylene Terephthalate (PET), Thermoplastic Polyolefins (TPO), Thermoplastic Elastomers (TPE), Polyurethanes (PU), Polystyrenes (PS), Acrylonitrile Butadiene Styrene (ABS), High-Impact Polystyrene (HIPS)
Processing Methods:
Injection Molding, Extrusion Blow Molding (EBM), Film Extrusion
End Uses:
Wires, Rigid Packaging, Flexible Packaging, Cables, Rigid Films, Cosmetic Packaging, Film
Labeling Claims:
Non-Flammable
Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.
iD Additives, Inc. - La Grange, IL
ID Additives, Inc. LF200101 Liquid Micro Fine Cell
Functions:
Foaming Agent
Compatible Polymers & Resins:
Styrene Acrylonitrile (SAN), Polypropylenes (PP), Polyethylenes (PE), Polyethylene Terephthalate (PET), Thermoplastic Polyolefins (TPO), Thermoplastic Elastomers (TPE), Polyurethanes (PU), Polystyrenes (PS), Acrylonitrile Butadiene Styrene (ABS), High-Impact Polystyrene (HIPS)
Processing Methods:
Injection Molding, Extrusion Blow Molding (EBM), Film Extrusion
End Uses:
Wires, Rigid Packaging, Flexible Packaging, Cables, Rigid Films, Cosmetic Packaging, Film
Labeling Claims:
Non-Flammable
Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.
iD Additives, Inc. - La Grange, IL
ID Additives, Inc. 71531 iD 100 MFC EXO
Functions:
Foaming Agent
Compatible Polymers & Resins:
Styrene Acrylonitrile (SAN), Polypropylenes (PP), Polyethylenes (PE), Polyethylene Terephthalate (PET), Thermoplastic Polyolefins (TPO), Thermoplastic Elastomers (TPE), Polyurethanes (PU), Polystyrenes (PS), Acrylonitrile Butadiene Styrene (ABS), High-Impact Polystyrene (HIPS)
Processing Methods:
Injection Molding, Extrusion Blow Molding (EBM), Film Extrusion
End Uses:
Wires, Rigid Packaging, Flexible Packaging, Cables, Rigid Films, Cosmetic Packaging, Film
Labeling Claims:
Non-Flammable
Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.
iD Additives, Inc. - La Grange, IL
ID Additives, Inc. Liquid Exo Foam MFC
Functions:
Foaming Agent
Compatible Polymers & Resins:
Styrene Acrylonitrile (SAN), Polypropylenes (PP), Polyethylenes (PE), Polyethylene Terephthalate (PET), Thermoplastic Polyolefins (TPO), Thermoplastic Elastomers (TPE), Polyurethanes (PU), Polystyrenes (PS), Acrylonitrile Butadiene Styrene (ABS), High-Impact Polystyrene (HIPS)
Processing Methods:
Injection Molding, Extrusion Blow Molding (EBM), Film Extrusion
End Uses:
Wires, Rigid Packaging, Flexible Packaging, Cables, Rigid Films, Cosmetic Packaging, Film
Labeling Claims:
Non-Flammable
Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.
iD Additives, Inc. - La Grange, IL
ID Additives, Inc. 6836 iD 130 MFC
Functions:
Foaming Agent
Compatible Polymers & Resins:
Styrene Acrylonitrile (SAN), Polypropylenes (PP), Polyethylenes (PE), Polyethylene Terephthalate (PET), Thermoplastic Polyolefins (TPO), Thermoplastic Elastomers (TPE), Polyurethanes (PU), Polystyrenes (PS), Acrylonitrile Butadiene Styrene (ABS), High-Impact Polystyrene (HIPS)
Processing Methods:
Injection Molding, Extrusion Blow Molding (EBM), Film Extrusion
End Uses:
Wires, Rigid Packaging, Flexible Packaging, Cables, Rigid Films, Cosmetic Packaging, Film
Labeling Claims:
Non-Flammable
Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.
iD Additives, Inc. - La Grange, IL
ID Additives, Inc. 6265 iD 70 MFC
Functions:
Foaming Agent
Compatible Polymers & Resins:
Styrene Acrylonitrile (SAN), Polypropylenes (PP), Polyethylenes (PE), Polyethylene Terephthalate (PET), Thermoplastic Polyolefins (TPO), Thermoplastic Elastomers (TPE), Polyurethanes (PU), Polystyrenes (PS), Acrylonitrile Butadiene Styrene (ABS), High-Impact Polystyrene (HIPS)
Processing Methods:
Injection Molding, Extrusion Blow Molding (EBM), Film Extrusion
End Uses:
Wires, Rigid Packaging, Flexible Packaging, Cables, Rigid Films, Cosmetic Packaging, Film
Labeling Claims:
Non-Flammable
Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.
Britec Solutions
BTec™ BSI-8150-FL
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-8150-FL is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.
Britec Solutions
BTec™ BSI-9135-FP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-9135-FP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.
Britec Solutions
BTec™ BSI-9135-VFP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-9135-VFP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.
Britec Solutions
BTec™ BSI-7070-FL
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-7070-FL is an endothermic and exothermic CFA Blends deliver a collaboration effect that provides attributes that each cannot supply by independently- the best of both chemistries.
Britec Solutions
BTec™ BSI-9170-FP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-9170-FP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.
Britec Solutions
BTec™ BSI-9100-AL
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-9100-AL is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.
Britec Solutions
BTec™ BSI-9170-VFP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-9170-VFP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.
Britec Solutions
BTec™ BSI-7100-VFL
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-7100-VFL is an endothermic and exothermic CFA Blends deliver a collaboration effect that provides attributes that each cannot supply by independently- the best of both chemistries.
Britec Solutions
BTec™ BSI-9100-AP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-9100-AP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.
Britec Solutions
BTec™ BSI-8100-VP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-8100-VP is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.
Britec Solutions
BTec™ BSI-9170-HFP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-9170-HFP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.
Britec Solutions
BTec™ BSI-8150-FP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-8150-FP is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.
Britec Solutions
BTec™ BSI-7070-FP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-7070-FP is an endothermic and exothermic CFA Blends deliver a collaboration effect that provides attributes that each cannot supply by independently- the best of both chemistries.
Britec Solutions
BTec™ BSI-7100-VFP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-7100-VFP is an endothermic and exothermic CFA Blends deliver a collaboration effect that provides attributes that each cannot supply by independently- the best of both chemistries.
Britec Solutions
BTec™ BSI-8100-FP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-8100-FP is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.
Britec Solutions
BTec™ BSI-8100-VL
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-8100-VL is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.
Britec Solutions
BTec™ BSI-8080-FP
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-8080-FP is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.
Britec Solutions
BTec™ BSI-9170-VFL
Functions:
Foaming Agent
Processing Methods:
Coextrusion, Structural Foam Molding, Extrusion, Cable Extrusion, Co-Injection Molding, Injection Molding, Rotational Molding
End Uses:
Wires, Housings, Toys, Cables, Housewares, Automotive Interior Parts
Labeling Claims:
Environmentally Friendly
BTec™ BSI-9170-VFL is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.