Products in Wire & Cable: Electrical/Electronic Applications

SABIC's Specialties Business FLEX NORYL WCA871A resin is a flexible, non-reinforced extrudable blend of Polyphenylene Ether (PPE) + Thermoplastic Elastomer (TPE). This material contains non-halogenated flame retardant and performance capable of meeting UL VW-1 requirements, 105C end use temperature rating, and heat deformation performance as defined by UL 1581. FLEX NORYL WCA871A resin is intended for evaluation in wire insulation and cable jacket applications in light colors. It has a Shore A Hardness reading of 84 and exhibits superior thermal stability, very low water absorption, good electric properties, and low specific gravity. Processing is typically conducted on standard extrusion equipment, and UL 1581 testing is conducted on 2.0mm wire with 0.12mm X 20 stranded copper conductor.

MOCOM Compounds ALFATER® XL A85E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with natural color, black color, and high viscosity. It has good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the Automotive, building and construction, Machinery, electrical and electronic, and Furniture industries for extruded parts, blow molded parts, and coextrusion. It can be used for profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct, as well as 2K components. Its adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer has been tested generally.

MOCOM Compounds ALTECH® ABS A 1000/172 UV is a acrylonitrile/butadiene/styrene/copolymer with good flow, processing stabilized and UV stabilized, suitable for information technology, electrical and electronic and telecommunications applications including display elements, keyboards, and other various applications. For processing, injection molding with a melt temperature of 200-240°C and a mold temperature of 50-80°C is recommended. Pre-drying conditions should be 80°C in an air circulating dryer for 3-6 hours or 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content, with a maximum moisture content of 0.20%.

MOCOM Compounds ALFATER® XL A90E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) that provides good weathering, chemical, ozone, and hot air resistance. It is suitable for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components, and can be used in the automotive, building and construction, machinery, electrical and electronic, and furniture industries. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL D40E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black or natural color. It has high viscosity and good resistance to weathering, chemicals, ozone, hot air, and hydrolysis. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture industries for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL D40I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, weathering resistance, chemical resistance, ozone resistance, and hot air resistance. It is suitable for injection molding and extrusion processes, with melt temperatures of 190-230°C and 200-240°C respectively, and mold temperatures of 10-70°C. Additionally, it has good adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general. It is mainly used in the automotive, building and construction, electrical and electronic, machinery, and furniture industries, and is typically applied to seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, profiles, cable jacketing, conduits, and 2K components.

MOCOM Compounds ALFATER® XL A60E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with high viscosity, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, such as for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. It also has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. All of these properties make it a versatile material for various applications.

MOCOM Compounds ALFATER® XL D50E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black color, high viscosity, and excellent weathering, chemical, ozone, and hot air resistance. It is suitable for pre-drying in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours. It is recommended for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, and is suitable for extruded parts, blow molded parts, and coextrusion. Typical applications include profiles, seals, sealing lips, conduit, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A65E 2GP0000 WT1159-17 is a thermoplastic vulcanisate (PP+EPDM) available in natural, white, and black colors. It has high viscosity and superior resistance to weathering, chemicals, ozone, hot air, and hydrolysis. This material is widely used in the automotive, building and construction, machinery, electrical and electronic, and furniture industries for applications such as profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, and air ducts, as well as 2K components. It offers excellent adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A80E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black color and high viscosity. It features good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture sectors and can be used for extruded parts, blow molded parts, coextrusion, profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

MOCOM Compounds ALFATER® XL A65E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with a natural color, white, or black. It has high viscosity and good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture market segments for extruded parts, blow molded parts, coextrusion profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components.

EverGlide® MB2450 is a Thermoplastic polyurethane polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1550 is a Polyethylene terephthalate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Campine MT is a very consistent and controlled Antimony trioxide grade with average particle size between 1.3-1.5 μm. The MT–grade is having the optimal particle size for flame retardant masterbatches . Campine MT( Medium Tining) is recommended in PVC plastisols for textile coatings used in tent covers , banners and canvas for lightweight constructions.The MT grade is also suitable for cable applications and in plastics for electric & electronic applications. Features Consistent particle size Controlled color index Powder with controlled and consistent purity levels Benefits Uniqe balance between optimal tinting, with a controlled viscosity and shear Consistent tinting strength in films and reproducible colors in thermoplastic masterbatches The tinting level is intermediate between Campine N and Campine LT Reliable purity of end product Reach Compliant

EverGlide® MB1350 is a Polycarbonates polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1450 is a polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB450 is a low density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

BRUGGOLEN® TP-H2062 is a halogen and metal-free heat stabilizer for polyamides in the form of polymeric granules. In E&E applications, it provides:Improved retention of mechanical performance under heat compared to standard phosphite/phenolic-based stabilizersTensile strength retention >50% for 2500h at 150°CMaintains comparative tracking index (CTI) up to 600VAllows E&E applications at elevated temperaturesHalogen and metal-free heat stabilizer in granular product form

EverGlide® MB950 is a High Impact Polystyrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1950 is a Polyamide 6 polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Campine XP is a very consistent and controlled Antimony trioxide grade with average particle size between 0.8-1.0 μm. Campine XP is the core grade to be used as additive into pigments. The XP–grade is also suitable as synergist for halogenated flame retardants in sensitive cable applications and plastics for electric & electronic applications. Features Consistent particle size Controlled color index Powder with controlled and consistent purity levels Benefits Stable polymer viscosity due to consisten & homogeneous mix Stable flameretardant level guaranteed in the end products Consistent tinting strength & stability in the coloring of the FR-plastics Reliable high purity of end product Reach - Compliant

Increased chemical resistance compared to P2H-AT, contains antistatic additive. Major Benefits: Chemical resistance; High gloss; Medium impact. Typical Applications: Telephones, Electronic boards, housings, Refrigerator door handles.

BRUGGOLEN® H3386 is a mixture of copper-complex-based antioxidants and synergists. It is used for the retention of natural polyamide color after conditioning. This product is particularly suitable for the stabilization of polyamides against thermal aging, chemical attack, or aggressive weathering conditions. Powerful long-term stabilization/ natural colors Excellent UV stabilization Very effective dispersion

BRUGGOLEN® H3336 is a mixture of copper complex-based antioxidants and synergists in powder form. BRUGGOLEN® H3336 provides highly efficient heat stabilization of polyamides up to 180°C, which leads to effective processing stabilization against polymer degradation. It gives a characteristic bluish discoloration after conditioning. Features:Cost-effectiveExcellent dispersionHigh extraction resistance, no plate-outSuited for E&E applicationsCharacteristic:Bluish discoloration after conditioning

EverGlide® MB1840 is a Polyoxymethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB250H is a High-density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

OMNISTAB® UV 326 is a UV absorber of the hydroxyphenyl benzotriazole class which imparts good light stability to a variety of polymers.

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Campine N is a very consistent and controlled Antimony trioxide grade with average particle size between 0.8 -1.0 μm. The N–grade is the core grade as synergist for halogenated flame retardants in cable applications and in plastics for electric & electronic applications. Campine N is also commonly used to build into pigments. Features Consistent particle size Controlled color index Powder with controlled and consistent purity levels Benefits Stable polymer viscosity due to consistent and homogeneous mix Stable flame retardant level in end product Consistent high tinting strength and stability in the coloring of the FR-plastics Reliable purity of end product Reach Compliant

EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

White Masterbatch 151 recommended for injections, Blow moldings, Sheets,Thin Films and Cables