Products in Wire & Cable: Flexible Grips

295 Products found in Wire & Cable

Matching product categories

Jacketing & Insulation

Jacketing & Insulation

Other Wire & Cable Applications

Other Wire & Cable Applications

Data Communication Cables

Data Communication Cables

Building Wires & Power Cables

Building Wires & Power Cables

Power Transmission & Distribution

Power Transmission & Distribution

Optical Fiber & Telecom

Optical Fiber & Telecom

TDSWith TDS

Arnitel® EL250 banner

EnvaliorArnitel® EL250

Polymer Name:Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:Injection Molding
End Uses:Wine Taps, Cable Jacketing, Kitchenware, Flexible Grips, Cables, Support Springs, Arnitel Spring In Monitor Arm, Robotics, Electronic Accessory Cases
Density:1080.0 - 1080.0 kg/m³
Strain at Break:300.0 - 300.0 %
Flexural Modulus:20.0 - 20.0 MPa

Arnitel® EL250 is a high-performance thermoplastic copolyester (TPC) known for its combination of flexibility, high-temperature resistance, strength, and excellent processing properties. It is an innovative choice, serving as a lighter, more intelligent, and environmentally friendly substitute for traditional rubbers in industries such as automotive and E&E. This contributes to reduced environmental impact and system costs. Arnitel® EL250 is specifically designed for injection molding processes, making it efficient and versatile for manufacturing applications. Importantly, it meets food contact quality standards, ensuring its suitability for applications where food safety is essential.

SEBS - ELASTRON G500.A23.N.PA banner

ElastronSEBS - ELASTRON G500.A23.N.PA

Tear Strength:11.0 - 11.0 kN/m
Strain at Break:1000.0 - 1000.0 %
Compression Set (70 °C):26.0 - 26.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

SEBS - ELASTRON G301.A45.N banner

ElastronSEBS - ELASTRON G301.A45.N

Tear Strength:27.0 - 27.0 kN/m
Strain at Break:900.0 - 900.0 %
Compression Set (70 °C):39.0 - 39.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G101.D47.B banner

ElastronSEBS - ELASTRON G101.D47.B

Tear Strength:54.0 - 54.0 kN/m
Strain at Break:550.0 - 550.0 %
Compression Set (70 °C):80.0 - 80.0 %

A hard, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G100.A40.B banner

ElastronSEBS - ELASTRON G100.A40.B

Tear Strength:21.0 - 21.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):43.0 - 43.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON P.G401.A90.N banner

ElastronSEBS - ELASTRON P.G401.A90.N

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding, Extrusion
Tear Strength:80.0 - 80.0 kN/m
Strain at Break:850.0 - 850.0 %
Compression Set (70 °C):56.0 - 56.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for use in medical applications.

SEBS - ELASTRON F.G100.A40.B banner

ElastronSEBS - ELASTRON F.G100.A40.B

Tear Strength:21.0 - 21.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):43.0 - 43.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

PLASMER® 1040DB/DN banner

Hyundai EPPLASMER® 1040DB/DN

Applications:Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:Polyolefins, Polyethylenes
Polymer Name:Ethylene-based Elastomer (POE)
End Uses:Housings, Automotive Interior Parts, Automotive Exterior Parts

PLASMER® 1040DB/DN is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1040DB/DN is a fully crosslinked product and can be reused without scrap during processing.

SEBS - ELASTRON G510.A50.N.ABS banner

ElastronSEBS - ELASTRON G510.A50.N.ABS

Tear Strength:14.0 - 14.0 kN/m
Strain at Break:400.0 - 400.0 %
Compression Set (70 °C):68.0 - 68.0 %

A soft, colorable SEBS based thermoplastic elastomer with superior UV resistance (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

SEBS - ELASTRON G500.A80.B.ABS banner

ElastronSEBS - ELASTRON G500.A80.B.ABS

Tear Strength:55.0 - 55.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):67.0 - 67.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

DynaStar™ 77340-1000 banner

Star Thermoplastic Alloys & Rubbers, Inc.DynaStar™ 77340-1000

Polymer Name:Styrenic Thermoplastic Elastomer

DynaStar™ 77340-1000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

SEBS - ELASTRON G300.A50.N banner

ElastronSEBS - ELASTRON G300.A50.N

Tear Strength:21.0 - 21.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):44.0 - 44.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON F.G401.A40.N banner

ElastronSEBS - ELASTRON F.G401.A40.N

Tear Strength:24.0 - 24.0 kN/m
Strain at Break:1200.0 - 1200.0 %
Compression Set (70 °C):36.0 - 36.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

SEBS - ELASTRON G601.A92.N banner

ElastronSEBS - ELASTRON G601.A92.N

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Extrusion, Injection Molding
Additives Included:Copper Stabilizer, Flame Retardant
Tear Strength:48.0 - 48.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):61.0 - 61.0 %

A hard, colorable copper stabilized halogen free flame retardant (HFFR) SEBS based thermoplastic elastomer (TPE) compound with superior UV resistance.

SEBS - ELASTRON G601.A70.B banner

ElastronSEBS - ELASTRON G601.A70.B

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Extrusion, Injection Molding
Additives Included:Copper Stabilizer, Flame Retardant
Tear Strength:25.0 - 25.0 kN/m
Strain at Break:550.0 - 550.0 %
Compression Set (70 °C):50.0 - 50.0 %

A soft, black copper stabilized halogen free flame retardant (HFFR) SEBS based thermoplastic elastomer (TPE) compound with superior UV resistance.

SEBS - ELASTRON F.G500.A40.N.ABS banner

ElastronSEBS - ELASTRON F.G500.A40.N.ABS

Tear Strength:15.0 - 15.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):70.0 - 70.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

SEBS - ELASTRON G601.A92.B banner

ElastronSEBS - ELASTRON G601.A92.B

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Extrusion, Injection Molding
Additives Included:Copper Stabilizer, Flame Retardant
Tear Strength:48.0 - 48.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):61.0 - 61.0 %

A hard, black copper stabilized halogen free flame retardant (HFFR) SEBS based thermoplastic elastomer (TPE) compound with superior UV resistance.

SEBS - ELASTRON G103.A60.B banner

ElastronSEBS - ELASTRON G103.A60.B

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:24.0 - 24.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):54.0 - 54.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G103.A60.N banner

ElastronSEBS - ELASTRON G103.A60.N

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:24.0 - 24.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):54.0 - 54.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON F.G100.A60.N banner

ElastronSEBS - ELASTRON F.G100.A60.N

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):51.0 - 51.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

SEBS - ELASTRON G101.A45.N banner

ElastronSEBS - ELASTRON G101.A45.N

Tear Strength:22.0 - 22.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):48.0 - 48.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

PHOENIX™ 02451 banner

Phon TechPHOENIX™ 02451

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Tear Strength:14.5425 - 14.5425 kN/m
Strain at Break:874.7 - 874.7 %

PHOENIX™ 02451 is an excellent scratch resistance for bonding with polypropylene and RoHS compliant. It is conform to FDA and suitable for medical tube with tools grip syringe stopper.

SEBS - ELASTRON G500.A40.B.PA banner

ElastronSEBS - ELASTRON G500.A40.B.PA

Tear Strength:16.0 - 16.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):34.0 - 34.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

PLASMER® 2055B/N banner

Hyundai EPPLASMER® 2055B/N

Applications:Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:Polyolefins, Polyethylenes
Polymer Name:Ethylene-based Elastomer (POE)
End Uses:Housings, Automotive Interior Parts, Automotive Exterior Parts

PLASMER® 2055B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 2055B/N can be reused without scrap during processing.

PLASMER® 1045BM/NM banner

Hyundai EPPLASMER® 1045BM/NM

Applications:Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:Polyolefins, Polyethylenes
Polymer Name:Ethylene-based Elastomer (POE)
End Uses:Housings, Automotive Interior Parts, Automotive Exterior Parts

PLASMER® 1045BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1045BM/NM is a fully crosslinked product and can be reused without scrap during processing.

SEBS - ELASTRON G301.A75.B banner

ElastronSEBS - ELASTRON G301.A75.B

Tear Strength:36.0 - 36.0 kN/m
Strain at Break:750.0 - 750.0 %
Compression Set (70 °C):48.0 - 48.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G400.A90.N banner

ElastronSEBS - ELASTRON G400.A90.N

Tear Strength:70.0 - 70.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):60.0 - 60.0 %

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

SEBS - ELASTRON G510.A40.N.ABS banner

ElastronSEBS - ELASTRON G510.A40.N.ABS

Tear Strength:11.0 - 11.0 kN/m
Strain at Break:400.0 - 400.0 %
Compression Set (70 °C):70.0 - 70.0 %

A soft, colorable SEBS based thermoplastic elastomer with superior UV resistance (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

SEBS - ELASTRON G418.A60.N banner

ElastronSEBS - ELASTRON G418.A60.N

Tear Strength:24.0 - 24.0 kN/m
Strain at Break:1000.0 - 1000.0 %

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) which has non-migratory type antistatic properties. Non- migratory type antistatic property is independent from relative humidity. This product is a good option when permanent antistatic property is required.

SEBS - ELASTRON G100.A21.B banner

ElastronSEBS - ELASTRON G100.A21.B

Tear Strength:12.0 - 12.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):40.0 - 40.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON F.G400.A80.B banner

ElastronSEBS - ELASTRON F.G400.A80.B

Tear Strength:50.0 - 50.0 kN/m
Strain at Break:850.0 - 850.0 %
Compression Set (70 °C):55.0 - 55.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

PLASMER® 1035BM/NM banner

Hyundai EPPLASMER® 1035BM/NM

Applications:Other Building & Construction Applications, Lighting, Exterior & Body
Product Families:Thermoplastic Olefin Elastomers (TPO), Thermoplastic Elastomers
Chemical Family:Polyolefins, Polyethylenes
Polymer Name:Ethylene-based Elastomer (POE)
End Uses:Housings, Automotive Interior Parts, Automotive Exterior Parts

PLASMER® 1035BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1035BM/NM is a fully crosslinked product and can be reused without scrap during processing.

SEBS - ELASTRON P.G401.A60.N banner

ElastronSEBS - ELASTRON P.G401.A60.N

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding, Extrusion
Tear Strength:38.0 - 38.0 kN/m
Strain at Break:1000.0 - 1000.0 %
Compression Set (70 °C):41.0 - 41.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for use in medical applications.

SEBS - ELASTRON G400.D56.B banner

ElastronSEBS - ELASTRON G400.D56.B

Tear Strength:120.0 - 120.0 kN/m
Strain at Break:500.0 - 500.0 %

A hard, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

SEBS - ELASTRON G501.A50.B.PS banner

ElastronSEBS - ELASTRON G501.A50.B.PS

Tear Strength:28.0 - 28.0 kN/m
Strain at Break:450.0 - 450.0 %
Compression Set (70 °C):84.0 - 84.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PS.

SEBS - ELASTRON G100.A21.N banner

ElastronSEBS - ELASTRON G100.A21.N

Tear Strength:12.0 - 12.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):40.0 - 40.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Show

of 295 results