Products in Wire & Cable: Heat Resistance

Melochem Molding Compound 736 by BI-QEM is a general purpose melamine formaldehyde resin. It is reinforced with high-class cellulose and modified with special purpose additives, pigments, cure regulators and lubricants. It offers good hardness, glossy surface with excellent scratch and chemical resistance. It provides resistance against surfactants and weak bases. The molded products can be recycled and exhibit good light stability and low water absorption properties. It is designed for processing by injection molding. Melochem Molding Compound 736 is recommended for dinnerware jugs, ladles and bowls. It is also suitable for electrical applications and provides heat resistance and abrasion resistance. Its shelf life is of 12 months

LLDPE Red Masterbatch which can be matched according to customer samples or Pantone color number, including ruby red, blood red, orange red, Coca-Cola red, Marlboro red, tomato red, pink, rose red, claret, iron red, garnet red .

Qingdao Zhongsu PE Wax PE-6A is a polymerized type.

HIPS (High Impact Polystyrene ) 616 is Super High Impact Extrusion Grade,Super High Impact Strength and it is used in Sheets, cable reels applications.

PLASMER® 1035BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1035BM/NM is a fully crosslinked product and can be reused without scrap during processing.

KEP® 530 produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.

PLASMER® 1380B/N is a flame retardant grade that can be widely used in automobiles and electrical/electronic parts. PLASTOMER ® 1380B/N is a fully crosslinked product and can be reused without scrap during processing.

Sebamide 6 S3C GF30-0 is a unamplified Polyamide 6.

China Star Materials Antioxidant ODA is mainly used to produce tires, tube tires, cables, rubber overshoes, rubber mats, thermal aureoles and sponge products, etc. When ODA is used in CR with Antioxidant ODA as co-reagent, it will perform its best thermal resistance, reduce the plasticity of unvulcanized CR, and decrease the degree of shrinkage during calendering, so is helpful to adjust the size of semi finished articles, and increase the stability of CR during transportation and storage.

SAK- CZL by Sun Ace is a one-pack calcium-zinc heat stabilizer. SAK- CZL is based on a combination of calcium and zinc soaps, together with organic and inorganic co-stabilizers to provide combined high heat stability and lubrication to suit a broad range of processing conditions. It has synergistic effects leading to an increased efficiency in comparison with the single components at satisfactory dosage levels. Used in flexible PVC cable applications.

E-SPHERES® SL500 are Coarse Grade White Hollow Ceramic Microspheres.

Fainplast Compounds Propylplus™ 703 is a range of polypropylene and halogen free compounds specially designed for those applications requiring superlor thermo-mechanical properties, outstanding heat resistance and high electrical properties.They can be used as primary insulation on multimedia, telecom, instrumentation wires, optical fiber cables and other applications where extremly thin wall thickness must comply with high performing properties.

KRALASTIC MTH-2 is a heat resistance ABS resin heat resistant grade.

KEP® 020P produced by Kumho Polychem is a highly functional special synthetic rubber that is mainly used for automotive parts and has excellent resistance to heat, ozone, and chemicals. With a lower specific gravity compared with other synthetic rubbers, it can be applicable for high-filling mixing, meaning it has a high economic feasibility.

Shenzhen Xinghua Pigment Masterbatch Pigment Yellow 151 is benzimidazolone yellow colored pigment by Shenzhen Xinghua Pigment Masterbatch. It offers very good migration fastness, excellent light fastness and high resistance. It can be used in rubber. Pigment Yellow 151 is suitable for PE, PP, EVA, PVC and POM.

CHLOROPRENE DCR-107 is applied in Belts, air springs / Low exothermic polymer.

ANTI-OXIDANT 01(SV 91A001AO) is used for LDPE, LLDPE, HDPE & HDPE Telecommunication duct and it having advantage to Protect the polymer from degradation.

RIGIDDI-PAK R-4242/4243Low cost, fast set potting compounds with excellent properties and FAST TURNOVER. R-4242/4243 are 1:1 by weight or volume, making them ideal for hand pour or automatic metering systems.

Ve Chemical N660 plays a crucial role in the rubber industry. They are widely used in tires and rubber products.When used in tires it ensures a high resistance to abrasion, good road handling and aging resistance.Carbon Black is also an important ingredient in the production of a multitude of other rubber goods like profiles, hoses and anti-vibration systems.

Fainplast Compounds Fainplast™ PVC KL 92/1 is a Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. They are used in wire & cable applications. The primary feature is heat resistant.

KRAIBURG EVM is used for the manufacture of flame-resistant, heat-resistant and weather-resistant products. Typical applications are cable sheathings, hoses, floor coverings, rubber-coated fabrics, seals and profiles for automotive and building construction.

RIGIDDI-PAK R-4307A high performance, long working life potting compound for potting/encapsulating units requiring high physical strength and excellent electricals. DI-PAK R-4307 is a holds its mechanical and electrical properties while under the most severe conditions. This is due to its low water absorption, thermal shock resistance, and retention of strength at elevated temperatures.

RIGIDDI-PAK R-4545 SeriesA very low viscosity potting and encapsulating system with excellent flow and penetration into the most intricate electronic components, without voids or porosity. The R-4545 Series cure to a hard, shiny, high gloss, plastic finish that is free from "blushing" under all humidity conditions. The R-4545 Series is ideal for electrical applications where surface finish and appearance are critical.

KRALASTIC K-2938FSR-1 is a heat resistance and high flow ABS resin heat resistant grade.

Dongguan SUGO Plastics Technology B1399D has high mechanical strength, anti-static, static dissipative with good toughness and good dimensional stability.it is also conductive, EMI with good creep resistance and ROHS compliant, heat & cold resistance.

E-SPHERES® SL75 are fine grade White Hollow Ceramic Microspheres.

Fainplast Compounds Fainplast™ PVC KL 77 is a Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. They are used in wire & cable applications. The primary feature is heat resistant.

Calcium Stearateused by the rubber and plastic industries as an effective elastomer processing aid and release agent. The low chloride content of STRUKTOL® Calcium Stearate allows for complete product dispersion in elastomers. Our "GR" version offers low dust and easy handling.

Shenzhen Xinghua Pigment Masterbatch Pigment Yellow 17 is diarylide yellow pigment. It offers high heat resistance, very good light fastness and good migration resistance. This grade can be used in rubber. Pigment Yellow 17 is designed for PE, PP, EVA, POM and PVC.

Rosin Chemical(Wuping) Terpene Resin T-80 acts as a tackifier. It is processed from natural turpentine. It doesn't crystallize. It is transparent, neutral, electrically insulating, hydrophobic and non-poisonous. It can resist sparse acid, sparse alkali, heat, light and aging and has excellent viscidity. It dissolves easily in different kinds of synthetic matter such as fragrant hydrocarbon and vegetable oil. It is also an ameliorant of hot melting material. Terpene resin is widely used as industrial material in plastics, rubber, electric cable and packaging.

Fainplast Compounds Fainplast™ PVC KL 92 is a Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. They are used in wire & cable applications. The primary feature is heat resistant.

Fainplast Compounds Fainplast™ PVC HGKA 81 is a Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. They are used in wire & cable applications. Main properties are Good Flexibility, Heat Resistant.

RIGIDDI-PAK R-4525 SeriesA general purpose series of low viscosity, strong, potting and encapsulating compounds. DI-PAK R-4525 has excellent electrical insulating properties and bonds well to many substrates. By varying the curing agents, the desired cure and working life can be obtained.

Zibo Fengyi Plastics CPVC RESIN is a kind of irregular structure thermo elastomer without any crystals. It has the characteristic of low plastic temperature, low ML viscosity, fine machining function, fine resistance at low temperature, fine heat resistance, fine deflection, fine fire-resistance, it can be mixed with CR, CSM, NBR, EPDM AND SBR at any proportion.

Rosin Chemical(Wuping) Terpene Resin T-90 acts as a tackifier. It is processed from natural turpentine. It doesn't crystallize. It is transparent, neutral, electrically insulating, hydrophobic and non-poisonous. It can resist sparse acid, sparse alkali, heat, light and aging and has excellent viscidity. It dissolves easily in different kinds of synthetic matter such as fragrant hydrocarbon and vegetable oil. It is also an ameliorant of hot melting material. Terpene resin is widely used as industrial material in plastics, rubber, electric cable and packaging.

Qingdao Zhongsu PE Wax H-20 is a polymerized type.