Products in Jacketing & Insulation: Molding Compound

Voltoid® S-350 is a cellulose based electrical barrier and insulation material that has Underwriters Laboratories’ flame classification of 94 V-0. S-350 is UL approved for continuous service at 90˚C (electrical and mechanical). It has a combination of firmness with flexibility that makes it well suited for a number of uses. S-350 die cuts cleanly without excessive die wear. It can be fabricated by creasing, cut scoring, forming, and can be printed.

Resinoid 2002-C5 is a fabric reinforced, two-step phenolic molding compound. It has improved heat distortion and dimensional stability. It has been formulated to exhibit excellent wear resistant properties. It is available in bulk form and is recommended for compression or transfer molding.

Haysite Reinforced Plastics 20000 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Resinoid 2215 is an organic fiber reinforced compound offering moderate impact strength. This product is available in a small pellet suitable for compression, transfer and injection molding.

Haysite Reinforced Plastics 18600 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Haysite Reinforced Plastics 43000 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Haysite Reinforced Plastics 14200 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Haysite Reinforced Plastics 30000 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Haysite Reinforced Plastics 54500 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Haysite Reinforced Plastics 46000 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Resinoid 2089 is a chopped fabric reinforced, two-step phenolic molding compound offering good physical and wear properties. This product has been specifically formulated for mechanical applications where minimal wear and low shrinkage values are desired. This material comes in bulk fabric form and is suitable for compression molding.

Voltoid® D-100 is an economical electrical and flame barrier, including Underwriters Laboratories’ flame class rating of 94 V-0. D-100 is recommended for applications where long exposure to high humidity is not anticipated. It is a versatile material which can be riveted, stitched, stapled, and formed.

Resinoid 2277 is a chopped fabric reinforced, two-step phenolic molding compound. It was specifically developed for molding applications where a lightweight, high strength material with good impact strength is needed. This material comes in pelletized from and is suitable for transfer or compression molding and can be used in injection molding systems with deep flight screws. Resinoid 2277 meets the requirements of ASTM D-5948 CFI-20 (Formerly MIL M14/1 CFI-20).

Verkid® BMC PX4 is a fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives. Generally thermoset unsaturated polyester or vynil-ester resins are used as organic matrix. With the aim of enhance its characteristics and improve its transformation, other components are added: catalysts, inhibitors, thermoplastic additives, demoulding agents, thickeners and pigments.

Verkid® SMC H154 is used in hot press, compression molding for the production of large parts with high mechanical properties and excellent surface finish. It is a glass fiber reinforced compound, in a thermoset resin matrix, with mineral fillers and different additives.

Carbkid® Fiber VE SMC is a polymer composite material reinforced with carbon fiber, which consists of a thermoset resin (usually vinylester or epoxy) and different additives that allow to obtain certain specific characteristics and improve the behavior of the material during the molding process of the final product. While the standard SMC is reinforced with glass fibers, the CSMC is reinforced with cut fibers or carbon fabrics. CSMC materials combine the low-weight characteristics offered by carbon composites in conjunction with a widespread forming process, such as compression molding, which allows for short manufacturing cycles and is therefore suitable for industrial applications in large series.

Durapol® M600 SMC is composed of polyester matrix and Chopped glass fibers with rovind reinforcement. It appears in Green RAL 6019 color with UP GM 205 Standards.

Resinoid 2005 is a cellulose reinforced, two-step phenolic molding compound. It exhibits excellent electrical and thermal properties and dimensional stability. This material comes in pelletized from and is suitable for transfer or compression molding. It can be preformed on automatic equipment.

Resinoid 2016P is a fabric reinforced, two-step phenolic molding compound offering excellent resistance to mechanical shock. It is supplied in pellet form suitable for transfer and compression molding. This material can also be used in injection molding systems with deep flight screws

Haysite Reinforced Plastics 44500 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Haysite Reinforced Plastics 42000 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Resinoid 2002-4A is a fabric reinforced, two-step phenolic molding compound. It has been modified to meet gear requirements and other stressed applications. It possesses excellent impact and flexural strength. It is available in bulk form and is recommended for compression or transfer molding.

Haysite Reinforced Plastics 24500 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Voltoid® V-090 is composed of a blend of organic and inorganic fibers, specially formulated inorganic fillers, and bound in a proprietary latex matrix. The material has good dielectric strength and a U.L. Flame Class Rating of 94-5VA. V-090 has a glow wire rating over 700˚C and is therefore suitable for demanding fire resistant applications.

Voltoid® D-225 exhibits superior electrical performance and flame retardance in a competitively priced barrier or insulation material, including achieving an Underwriters Laboratories’ flame class rating of 94 V-0.

Resinoid 2020 is a fabric reinforced, two-step phenolic molding compound. It exhibits excellent moldability in transfer molding. It possesses excellent dimensional stability and impact strength properties. It is available in bulk form and is recommended for compression or transfer molding.

Haysite Reinforced Plastics 270FRII are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Haysite Reinforced Plastics 14100 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Resinoid 2101 is an organic fiber reinforced, two-step phenolic molding compound. It was specifically developed for molded parts requiring nominal mechanical strengths and excellent electrical properties. This material comes in pelletized form an d in grades suitable for injection, transfer or compression molding.

Haysite Reinforced Plastics 48600 are sold commercially to other injection, compression, and transfer molders for use in various applications and also used internally for our compression molded applications. Properties include are arc and track resistance, corrosion resistance, low profile, high temperature, and wear resistance.

Resinoid 2016 is a fabric reinforced, two-step phenolic molding compound. It is available in bulk form and is recommended for compression or transfer molding.