Products in Jacketing & Insulation: Pipe Seals

320 Products found in Jacketing & Insulation

Fluon+™ Glass-Reinforced PF-21001 banner

AGC Chemicals Americas, Inc.Fluon+™ Glass-Reinforced PF-21001

Polymer Name:Perfluoroalkoxy Polymer (PFA)
Processing Methods:Extrusion, Injection Molding
Fillers Included:Glass Fiber
Additives Included:Pigment (Unspecified)

AGC Chemicals Americas, Inc. Fluon+™ Glass-Reinforced PF-21001 is a reinforced PFA compound designed for use in injection molding or extrusion applications where additional mechanical properties are required. The compound contains 25% glass fiber and 75% PFA, a copolymer of tetrafluoroethylene and perfluoroalkoxyethylene. These pre-pigmented black pellets are approximately 0.080 inches in diameter and 0.125 inches long, and are suitable for applications that demand the thermal and chemical resistance of PFA, along with the additional mechanical toughness provided by the glass fiber reinforcement.

Fluon+™ FP-EF-103 banner

AGC Chemicals Americas, Inc.Fluon+™ FP-EF-103

Polymer Name:Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:Extrusion, Injection Molding
Fillers Included:Glass Fiber
Flexural Modulus:3272.75 - 3272.75 MPa

AGC Chemicals Americas, Inc. Fluon+™ FP-EF-103 (464102519) is a 15% glass-reinforced ETFE product designed for use in injection molding or extrusion applications. The glass fibers are added to improve the physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.100” in diameter.

Fluon+™ FP-EF-105 banner

AGC Chemicals Americas, Inc.Fluon+™ FP-EF-105

Polymer Name:Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:Extrusion, Injection Molding
Fillers Included:Glass Fiber
Flexural Modulus:4823.0 - 4823.0 MPa

AGC Chemicals Americas, Inc. Fluon+™ FP-EF-105 (464102520) is a 25% glass-reinforced ETFE product designed for use in injection molding or extrusion applications. The glass fibers are added to improve the physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.100” in diameter.

Fluon+™ FP-EF-101 banner

AGC Chemicals Americas, Inc.Fluon+™ FP-EF-101

Polymer Name:Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:Extrusion, Injection Molding
Fillers Included:Glass Fiber
Flexural Modulus:1550.25 - 1550.25 MPa

AGC Chemicals Americas, Inc. Fluon+™ FP-EF-101 (464102517) is a 5% glass-reinforced ETFE product designed for use in injection molding or extrusion applications. The glass fibers are added to improve the physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.100” in diameter.

Fluon+™ FP-EF-102 banner

AGC Chemicals Americas, Inc.Fluon+™ FP-EF-102

Polymer Name:Ethylene Tetrafluoroethylene Copolymer (ETFE)
Processing Methods:Extrusion, Injection Molding
Fillers Included:Glass Fiber
Flexural Modulus:2411.5 - 2411.5 MPa

AGC Chemicals Americas, Inc. Fluon+™ FP-EF-102 (464102518) is a 10% glass-reinforced ETFE product designed for use in injection molding or extrusion applications. The glass fibers are added to improve the physical properties of ETFE. This compound is supplied in cylindrical pellet form and the pellets are approximately 0.125” in length by 0.100” in diameter.

PEROXAN DA banner

PerganPEROXAN DA

Functions:Curing Agent, Initiator
Chemical Family:Peroxides
Compatible Polymers & Resins:Unsaturated Polyester (UPE), Acrylics, Polyethylenes (PE), Polystyrenes (PS), Polypropylenes (PP)

PEROXAN DA is Di-tert-amyl peroxide 93%, Liquid.PEROXAN DA is used for the (co)polymerization of ethylene, styrene, acrylates and methacrylates. PEROXAN DA is also used for the production of controlled rheology polypropylene (CR-PP).PEROXAN DA is used for the curing of unsaturated polyester resins and polymerization of styrene alkyde mixtures.

SEBS - ELASTRON G500.A40.B.PA banner

ElastronSEBS - ELASTRON G500.A40.B.PA

Tear Strength:16.0 - 16.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):34.0 - 34.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

SEBS - ELASTRON G400.A52.T banner

ElastronSEBS - ELASTRON G400.A52.T

Tear Strength:31.0 - 31.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):94.0 - 94.0 %

A soft, transparent SEBS based thermoplastic elastomer (TPE) compound designed for injection molding applications.

SEBS - ELASTRON G301.A75.B banner

ElastronSEBS - ELASTRON G301.A75.B

Tear Strength:36.0 - 36.0 kN/m
Strain at Break:750.0 - 750.0 %
Compression Set (70 °C):48.0 - 48.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON F.G400.A80.B banner

ElastronSEBS - ELASTRON F.G400.A80.B

Tear Strength:50.0 - 50.0 kN/m
Strain at Break:850.0 - 850.0 %
Compression Set (70 °C):55.0 - 55.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

SEBS - ELASTRON G510.A40.N.ABS banner

ElastronSEBS - ELASTRON G510.A40.N.ABS

Tear Strength:11.0 - 11.0 kN/m
Strain at Break:400.0 - 400.0 %
Compression Set (70 °C):70.0 - 70.0 %

A soft, colorable SEBS based thermoplastic elastomer with superior UV resistance (TPE) compound specially designed for excellent adhesion to ABS/PC/PMMA/SAN/ASA/PET and PET-G.

SEBS - ELASTRON G601.A92.B banner

ElastronSEBS - ELASTRON G601.A92.B

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Extrusion, Injection Molding
Additives Included:Copper Stabilizer, Flame Retardant
Tear Strength:48.0 - 48.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):61.0 - 61.0 %

A hard, black copper stabilized halogen free flame retardant (HFFR) SEBS based thermoplastic elastomer (TPE) compound with superior UV resistance.

SEBS - ELASTRON P.G401.A50.N banner

ElastronSEBS - ELASTRON P.G401.A50.N

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Extrusion, Injection Molding
Tear Strength:32.0 - 32.0 kN/m
Strain at Break:1100.0 - 1100.0 %
Compression Set (70 °C):36.0 - 36.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for use in medical applications.

SEBS - ELASTRON G101.A83.B banner

ElastronSEBS - ELASTRON G101.A83.B

Tear Strength:50.0 - 50.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):48.0 - 48.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G100.A80.N banner

ElastronSEBS - ELASTRON G100.A80.N

Tear Strength:45.0 - 45.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):55.0 - 55.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON P.G401.A60.N banner

ElastronSEBS - ELASTRON P.G401.A60.N

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding, Extrusion
Tear Strength:38.0 - 38.0 kN/m
Strain at Break:1000.0 - 1000.0 %
Compression Set (70 °C):41.0 - 41.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for use in medical applications.

SEBS - ELASTRON G400.A70.B banner

ElastronSEBS - ELASTRON G400.A70.B

Tear Strength:39.0 - 39.0 kN/m
Strain at Break:900.0 - 900.0 %
Compression Set (70 °C):49.0 - 49.0 %

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

SEBS - ELASTRON G301.A90.B banner

ElastronSEBS - ELASTRON G301.A90.B

Tear Strength:75.0 - 75.0 kN/m
Strain at Break:850.0 - 850.0 %
Compression Set (70 °C):62.0 - 62.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G100.A21.N banner

ElastronSEBS - ELASTRON G100.A21.N

Tear Strength:12.0 - 12.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):40.0 - 40.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

EcoFlame APP202 (Ammonium Polyphosphate) banner

UnibromEcoFlame APP202 (Ammonium Polyphosphate)

Chemical Name:Ammonium Polyphosphate
Functions:Smoke Suppressant, Flame Retardant
Chemical Family:Phosphates
Labeling Claims:Halogen-free
Compatible Polymers & Resins:Polypropylenes (PP), Thermoplastic Polyurethane (TPU), Epoxies (EP), Unsaturated Polyester (UPE), Cellulose & Cellulosics

EcoFlame APP202 (Ammonium Polyphosphate) is a kind of ammonium polyphosphate, and it can be adopted for all applications where APP201 is used. Aside from this, this chemical additive has found other applications that it is extremely suitable for, and here are some details. On account of its low water solubility, our product is particularly suitable as an additive to polymers or intumescent coatings for exterior application. This phosphorous-based non-halogenated fire retardant could deliver good flame retardant performance to cellulose-containing materials, such as paper, wood, car's fireproof cloth, military cellulose materials, etc.

SEBS - ELASTRON G100.A30.N banner

ElastronSEBS - ELASTRON G100.A30.N

Tear Strength:17.0 - 17.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):41.0 - 41.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G100.A21.B banner

ElastronSEBS - ELASTRON G100.A21.B

Tear Strength:12.0 - 12.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):40.0 - 40.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Varteco Quimica Puntana KALFLEX-16 (DINP) banner

Varteco Quimica PuntanaVarteco Quimica Puntana KALFLEX-16 (DINP)

Functions:Plasticizer
Chemical Family:Pthalates
End Uses:Pipe Seals, Pipes

Varteco Quimica Puntana KALFLEX-16 (DINP) is a primary plasticizer similar to KALFLEX-10 (DOP). Their differences vary according to the increasing molecular weight. It is less volatile, has less power as solvent and less plasticizer effectiveness. As a result, it is adequate to be used in plastisols when formulae with low viscosity and low level of plasticization are required. It is also used with KALFLEX-10 to regulate the final viscosity of plastisols. Additionally, it can be used in high temperature compounds due to its lower volatility.

PEROXAN DC-40 MB banner

PerganPEROXAN DC-40 MB

Chemical Name:Dicumyl Peroxide
CAS Number:80-43-3
Functions:Curing Agent
Chemical Family:Peroxides
Compatible Polymers & Resins:Styrene Butadiene Rubber (SBR), Natural Rubbers (NR), Nitrile Butadiene Rubber (NBR), Ethylene Vinyl Acetate (EVA), Ethylene Propylene Diene Monomer (EPDM), Low-Density Polyethylene (LDPE)
Synonyms:Active dicumyl peroxide, Bis(1-methyl-1-phenylethyl) peroxide, Bis(2-phenyl-2-propyl) peroxide, Bis(α,α-dimethylbenzyl) peroxide, Cumene peroxide, Cumyl peroxide, Di-α-cumyl peroxide, Dicumene hydroperoxide, Dicumenyl peroxide, Diisopropylbenzene peroxide, Isopropylbenzene peroxide, NSC 56772, α-Cumyl peroxide, α,α-Dimethylbenzyl peroxide, α,α′-Dicumyl peroxide

PEROXAN DC-40 MB is Dicumyl peroxide 40%, Granules with EPM.PEROXAN DC-40 MB is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

SEBS - ELASTRON F.G100.A60.N banner

ElastronSEBS - ELASTRON F.G100.A60.N

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):51.0 - 51.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound designed for contact with non-fatty foods.The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of Regulation 10/2011/EC.

SEBS - ELASTRON G103.A60.N banner

ElastronSEBS - ELASTRON G103.A60.N

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding
Tear Strength:24.0 - 24.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):54.0 - 54.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G501.A50.B.PS banner

ElastronSEBS - ELASTRON G501.A50.B.PS

Tear Strength:28.0 - 28.0 kN/m
Strain at Break:450.0 - 450.0 %
Compression Set (70 °C):84.0 - 84.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PS.

SEBS - ELASTRON P.G401.A70.B banner

ElastronSEBS - ELASTRON P.G401.A70.B

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Extrusion, Injection Molding
Tear Strength:45.0 - 45.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):43.0 - 43.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound designed for use in medical applications.

SEBS - ELASTRON G200.A50.N banner

ElastronSEBS - ELASTRON G200.A50.N

Tear Strength:20.0 - 20.0 kN/m
Strain at Break:550.0 - 550.0 %
Compression Set (70 °C):29.0 - 29.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers high temperature resistance and excellent compression set with superior UV resistance.

SEBS - ELASTRON G101.A30.B banner

ElastronSEBS - ELASTRON G101.A30.B

Tear Strength:18.0 - 18.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):34.0 - 34.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G500.A80.N.PA banner

ElastronSEBS - ELASTRON G500.A80.N.PA

Tear Strength:36.0 - 36.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):51.0 - 51.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

SEBS - ELASTRON G300.A75.N banner

ElastronSEBS - ELASTRON G300.A75.N

Tear Strength:43.0 - 43.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):51.0 - 51.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

PEROXAN DC-P + banner

PerganPEROXAN DC-P +

Chemical Name:Dicumyl Peroxide
CAS Number:80-43-3
Functions:Curing Agent
Chemical Family:Peroxides
Compatible Polymers & Resins:Low-Density Polyethylene (LDPE), Unsaturated Polyester (UPE), Styrene Butadiene Rubber (SBR), Natural Rubbers (NR), Nitrile Butadiene Rubber (NBR), Ethylene Vinyl Acetate (EVA), Ethylene Propylene Diene Monomer (EPDM)
Processing Methods:Compression Molding
Synonyms:Active dicumyl peroxide, Bis(1-methyl-1-phenylethyl) peroxide, Bis(2-phenyl-2-propyl) peroxide, Bis(α,α-dimethylbenzyl) peroxide, Cumene peroxide, Cumyl peroxide, Di-α-cumyl peroxide, Dicumene hydroperoxide, Dicumenyl peroxide, Diisopropylbenzene peroxide, Isopropylbenzene peroxide, NSC 56772, α-Cumyl peroxide, α,α-Dimethylbenzyl peroxide, α,α′-Dicumyl peroxide

PEROXAN DC-P + is Dicumyl peroxide 98%, Powder.PEROXAN DC-P+ is used for the curing of unsaturated polyester resins.PEROXAN DC-P+ is used for the crosslinking of natural rubber and synthetic rubber, as well as polyolefins.

SEBS - ELASTRON G401.A82.N banner

ElastronSEBS - ELASTRON G401.A82.N

Tear Strength:60.0 - 60.0 kN/m
Strain at Break:800.0 - 800.0 %
Compression Set (70 °C):56.0 - 56.0 %

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good scratch and abrasion resistance is required.

PEROXAN PK295 V banner

PerganPEROXAN PK295 V

Functions:Curing Agent, Initiator
Chemical Family:Peroxides
Compatible Polymers & Resins:Unsaturated Polyester (UPE), Acrylics, Polystyrenes (PS)

PEROXAN PK295 V is 1,1-Di-(tert-butylperoxy)-3,3,5-trimethylcyclohexane 50%, Solution in odorless white spirits.PEROXAN PK295 V is used for the (co)polymerization of styrene, acrylonitrile, acrylates and methacrylates.PEROXAN PK295 V is used for the curing of unsaturated polyester resins.

SEBS - ELASTRON G100.A75.B banner

ElastronSEBS - ELASTRON G100.A75.B

Tear Strength:40.0 - 40.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):59.0 - 59.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Show

of 320 results