Products in Other Wire & Cable Applications: Hoses

NBR 1855 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

NBR 1845 is essentially an acrylonitrile (17-20%) and 1,3-butadiene copolymer obtained by emulsion polymerization method with the use of fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Low content of acrylonitrile, good frost-resistance, satisfactory oil resistance.

Fujipoly Industries 7BN is for general use. It is made by extruding silicone rubber into a tube shape. The standard materials are roughly divided into two types, 7BN type (for general use) which has various standard dimensions.

Mercure TBBS is delayed action sulphenamide alone or in combination with small quantities of booster accelerators is widely used in NR, SBR, NR/BR/SBR blend, NBR and other synthetic rubber based compounds used for the manufacture of auto tire treads, sidewalls, casings, cycle tires & tubes, conveyor & V-belts, tire retreading & repair materials, footwear, hoses, cables, injection molded products and various compression / transfer molded as well as extruded rubber goods.

HIPREN® EM 1500T is Appropriate for rubber compounds used in the production of car tires and inner tubes, footwear, cables, conveyor belts and various technical rubber goods.

CHLOROPRENE DCR-42A is applied in Cables, hoses / High strength and loading

Paracril N41 is a copolymer of butadiene and acrylonitrile, cold polymerized with a semi staining stabilizer.

Neoplast™ 180 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

VinoPrene 710 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Neoplast™ 180 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Vatan Plastik San. Tic. AS Diotyl Phthalate (DOP) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

VinoPrene 706 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

EKFLEX 862 is a non-phthalate plasticizer based on dioctyl adipate (DOA), featuring outstanding performance and efficiency and imparting great flexibility to the plasticized material, even at low temperatures.

Paraclean 28L45 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

A soft, colorable copper stabilized halogen free flame retardant (HFFR) SEBS based thermoplastic elastomer (TPE) compound with superior UV resistance.

CHLOROPRENE M-40 is applied in General purpose, cables, belts, hoses, other industrial applications.

EKFLEX 983 is a colorless liquid plasticizer based on diisononyl phthalate (DINP) and monomeric isomers thereof, featuring excellent performance, low volatility and outstanding setting properties and used globally to manufacture laminates and sealants for the automotive industry.

A soft, colorable copper stabilized halogen free flame retardant (HFFR) SEBS based thermoplastic elastomer (TPE) compound with superior UV resistance.

Vinoplast 550 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Apcoflex® N685 is a cold polymerized, medium ACN containing acrylonitrile butadiene co-polymer, It contains non-staining antioxidant.

A soft, black copper stabilized halogen free flame retardant (HFFR) SEBS based thermoplastic elastomer (TPE) compound with superior UV resistance.

VinoPrene 707 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

CSM 40 rubber is a kind of white material which turns to light yellow or brown, tasteless evenly rubber-shape, and it has the mutual character with rubber which also has its own property. 2. It is non-toxic, non-explosive, open flame burning, auto-extinction after remove. 3. It has excellent ozone resistance, resistance to atmospheric aging, chemical resistance, better physical mechanical, thermal aging resistance and low temperature resistance (-20℃-12℃), oil resistance, flame resistance, abrasion resistance and electrical insulation etc.

Polsil® GUM 210/65 is a special grade heat cured elastomer with higher thermal resistance.

Nurcacit MTT PDR used as vulcanization accelerator for chloroprene rubber, Injection-molded and technical extruded articles, profiles, hoses, seals, mills (rollers), cable sheeting, conveyor-belts based on CR. Possesses good module, age-resistance and advantageous compression set. Nurcacit MTT dispersed perfectly in compounds based on polychloroprene. As a result of its relatively low melting point (about 60 to 70 C), the material usually melts down and disperses without any problems. Because Nurcacit MTT is a powerful accelerator, it is best to incorporate it at the end of the mixing process together with ZnO. Particularly in compounds with a high rubber content, high viscosity or containing large amounts of active carbon black, MTT should be incorporated into the otherwise finished compound while it is being preheated for conversion.

Nanjing Shuguang Chemical Group Accelerant SG-R 705 is the rubber antioxidant. It is mainly used in such synthetic rubbers as SBR, NBR, chloroprene, chlorohydrin, chlorosulfonated polyethylene rubber and so on, and can prevent the cracking due to sunlight, ozone and enhance thermal stability for the chloroprene rubber and chlorosulfonated polyethylene. In plastic industry it serves as the UV stabilizer and the antiozonant of polymer material. It is used in polypropylene fiber, film and narrowband to provide good stability, but make the product appear yellow-green. The amount of dosage is 0.3 - 3 PHR.

EKFLEX 1300 plasticizer boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

Aipol Spa APAN is a thermoplastic polyurethane (TPU) pellet, produced through “reactive extrusion” in the Aipol plant of Montegranaro. The TPUs combine the high technical properties of the polyurethane elastomers, to the possibility of processing through a termoplastic technology. A bridge between rubber and traditional thermoplastics.

MARFRAN® Shore D are compounds obtained mixing different types of thermoplastic polyolefin with SEBS elastomer. Olefin thermoplastic compounds modified with SEBS block copolymer are characterized by a high modulus of elasticity, excellent durability and resistance to low Temperatures.

Paracril CLT is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

ESD M2185A belongs to ESD Thermoplastic Elastomer Series with Anti-static, High mechanical strength, Static dissipative and Good toughness.

EKFLEX 1200 plasticizer boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

ESD P2130 belongs to TPU ESD Thermo plastic Polyurethane Series with Anti-static, High mechanical strength, Static dissipative and Good toughness.

MARFRAN® E FG1 is a TPE-SSBS base polyolefin polymers and others with SEBS elastomer. This Compounds for injection molding and extrusion: soft to the touch, it guarantees excellent resistance to aging and atmospheric agents, low compression set, high elasticity, easy to work, colorable and high transparency.

CHLOROPRENE DCR-107 is applied in Belts, air springs / Low exothermic polymer.