Products in Other Wire & Cable Applications: Cost Effective

Vitrolite® is a naturally occurring mineral and with concentrations of less than 0.5% has a profound effect on polymer melts. Vitrolite® is effective in reducing polymer melt viscosity without adversely affecting the finished polymer mechanical properties. Vitrolite is not known to chemically interact with polymers or additives, and has been widely used in the polymer industry. It is not essentially inert but it is stable (millions of years in age) and does not change its effect upon multiple uses (e.g., compounding followed by molding).

Vitrolite® is a naturally occurring mineral and with concentrations of less than 0.5% has a profound effect on polymer melts. Vitrolite® is effective in reducing polymer melt viscosity without adversely affecting the finished polymer mechanical properties. Vitrolite is not known to chemically interact with polymers or additives, and has been widely used in the polymer industry. It is not essentially inert but it is stable (millions of years in age) and does not change its effect upon multiple uses (e.g., compounding followed by molding).

Vitrolite® is a naturally occurring mineral and with concentrations of less than 0.5% has a profound effect on polymer melts. Vitrolite® is effective in reducing polymer melt viscosity without adversely affecting the finished polymer mechanical properties. Vitrolite is not known to chemically interact with polymers or additives, and has been widely used in the polymer industry. It is not essentially inert but it is stable (millions of years in age) and does not change its effect upon multiple uses (e.g., compounding followed by molding).

BRUGGOLEN® H3336 is a mixture of copper complex-based antioxidants and synergists in powder form. BRUGGOLEN® H3336 provides highly efficient heat stabilization of polyamides up to 180°C, which leads to effective processing stabilization against polymer degradation. It gives a characteristic bluish discoloration after conditioning. Features:Cost-effectiveExcellent dispersionHigh extraction resistance, no plate-outSuited for E&E applicationsCharacteristic:Bluish discoloration after conditioning

Vitrolite® is manufactured from naturally occurring amorphous silicates and aluminosilicates and is non-toxic, inert, non-flammable, and does not affect UL approvals. Vitrolite® is suitable for all products including electrical, food contact, and medical devices. It is currently used as a processing additive for molding auto parts, food containers, consumer electronics, toys, wire and cable, pipe and a host of other products.

China Jinan Taixing Fine Chemical Aluminum hydroxide has a competitive price with cost performance.

KV-9010 is a Close match to RAL 9010. It is used in PVC cables, Plasticized PVC extrusion or injection articles.

Fujipoly Industries 7BN is for general use. It is made by extruding silicone rubber into a tube shape. The standard materials are roughly divided into two types, 7BN type (for general use) which has various standard dimensions.

Yildiz Kolor AB-SS/PP is an antiblock mastermatch group and Synthetic Silica additive.

Black Masterbatch 350 is recommended for injections,Thin films, Sheets, Pipes, Blow moldings, Cables and Compound.

China Jinan Taixing Fine Chemical Magnesium hydroxideMg(OH)2 is anti-incendiary and anti-smoking, which is largely beneficial for various rubbers, PU, fiber, coating and paint industries. It is also available in fined and surface-treated grades which are suited to specific applications: increase inters consistency with basic materials and improves the synthetically property.

Indo-Nippon Chemical Di Iso Decyl Phthalate (DIDP) finds improved performance in PVC applications due to lower volatility, higher heat stability and lower migration. Due to its superior electrical resistance, it is used in the manufacture of electrical wires and cables. It has lower specific gravity and can be economical on volume cost. In plastisol applications, DIDP exhibits initial low viscosity and excellent storage stability. It has high resistance to migration, aging and oil extraction.

Yildiz Kolor AO-10/PE is an antioxidant mastermatch group and Combination of heat and processing stabilizers additive.

Ecopiren 5,5 is a fine white powder of magnesium hydroxide. Produced from selectively mined natural magnesium hydroxide (ground brucite), by milling and classifying.

WHITE (N)-1612 is polyethylene carrier resin based titanium dioxide pigment masterbatch.

Yuyao Zhongfa Engineering Plastics PA FRML is Flame-Retardant Masterbatch of PA6 or PA66 which has good mechanical properties, aging resistance, thermal stability and good processibility, etc. after adding the master. and the flame retardant grade could be changed from UL-94, V0, V1, V2 to HB. The mixture of flame-retardant masterbatch and PA6 can replace flame-retardant PA6 to decrease production cost, so does PA66 and can be used for household electric appliance parts, low voltage electrical apparatus, air switch, electric plug-in unit, communications equipment's, lighting luminaire, luminaire ,mining electric apparatus parts, etc.

Black Masterbatch 360 is recommended for injections,Thin films, Sheets, Pipes, Blow moldings, Cables and Compound.

Ecopiren 3,5 is a fine white powder of magnesium hydroxide. Produced from selectively mined natural magnesium hydroxide (ground brucite), by milling and classifying.

White Masterbatch 145 recommended for injections, Blow moldings, Sheets,Thin Films and Cables

EKFLEX 1300 plasticizer boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

EKFLEX 1200 plasticizer boasts a major advantage in terms of performance vs. cost, which sets it apart from other plasticizers more commonly used in the marketplace.

TPE Solutions TPV 170A Precolored Gray is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 170A Precolored Gray provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

White Masterbatch 161 recommended for injections, Blow moldings, Sheets,Thin Films and Cables

TPE Solutions TPV 155A is a thermoplastic Elastomer (TPE), that is based on PP/EPDM. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs/TPEs. TPV – 160A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F. It is ozone, UV and water resistant as well. This grade is also considered polyolefin.

PPR-01ML contains colorant and is a kind of masterbatch with high mechanical properties, aging resistance , thermal stability and good processibility. It can be colored up easily and its production cost is low.

Black Masterbatch 4420 is recommended for injections, Blow moldings, Cables, Sheets, Pipes, Water Pipes, Fibers and Compound.

DynaStar™ 77370-1000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

DynaStar™ 77360-1000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

TPE Solutions TPV 165A thermoplastic vulcanizate is a fully crosslinked, EPDM/PP compound. It is designed to replace thermoset elastomers, such as EPDM or polychloroprene, and traditional thermoplastic TPVs. TPV – 165A provides the performance of vulcanizated rubber with the advantage of low-cost thermoplastic processing. Excellent oil and chemical resistance with a maximum service temperature of 275°F.

Black Masterbatch 945 is recommended for injections, Blow moldings, Cables, Sheets, Pipes, Water Pipes, Fibers and Compound.

M.G. Polyblends BK-1013 is used in economic version of Super black, It is mainly used in Thin Polyolefin films (Thickness approx 15-20 microns), HDPE Pipes, Tarpaulins, Cables.

Yildiz Kolor AB-SS/PE is an antiblock mastermatch group and Synthetic Silica additive.

Yildiz Kolor ANS-125 is an antislip mastermatch group and Coarse Particle Size Inorganic Additive.

White Masterbatch 141 recommended for injections, Blow moldings, Sheets,Thin Films and Cables

White Masterbatch 174 recommended for injections, Blow moldings, Sheets,Thin Films and Cables