Products in Power Transmission & Distribution: Wires

POWERSIL® XLR® 630 A/B is a two-component silicone compound with excellent processing properties and low viscosity. It is designed for easy handling and application. The vulcanized rubber exhibits good mechanical properties and excellent dielectric behavior. It is a ready-to-use, two-component system that provides the desired characteristics for various applications.

POWERSIL® 3525 MH silicone rubber is a one-component, ready-to-use, addition-curing compound that produces an electrically insulating, highly erosion-resistant silicone elastomer upon curing. Compared to conventional silicone rubber, it shows fast curing, with curing time being reduced by 30 to 50% depending on wall thickness and available machinery and runner system. No peroxide decomposition products are released during the curing process.

ELASTOSIL® R Plus 4305/80 is a two-component, high-consistency silicone rubber specifically designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and display good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

ELASTOSIL® R Plus 4305/70 is a two-component, high-consistency silicone rubber specifically developed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and demonstrate good to very good mechanical properties. This fast-curing silicone rubber displays good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

POWERSIL® 600 A/B is a pourable, addition-curing, two-component silicone rubber that cures at room temperature. It is specifically designed for casting applications and forms soft products with high mechanical strength. This ready-to-use, two-component system is very easy to process thanks to its low viscosity. It offers excellent dielectric properties and is best suited for outdoor applications due to its UV and weathering resistance, as well as its excellent hydrophobic properties.

POWERSIL® 311 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product is specifically recommended for the production of electrical insulating equipment used outdoors, such as composite insulators, arrester housings, bushings, and more. It is particularly suitable for extruded parts that are cured in the air.

POWERSIL® 3500 MH is a high-temperature vulcanizing (HTV) silicone rubber, used as an addition-curing one-component compound for the production of press-cured articles. The resulting vulcanized products are resistant to tracking and display good to very good mechanical properties. The compound does not release any peroxide split products during cure or post-cure processes. The curing system is significantly faster compared to peroxide-curing materials; cure time can be reduced by 30-50%, depending on the wall thickness.

WACKER® Silicone Paste P is a translucent, vaseline-like paste that has a relatively stiff consistency and provides water repellency. When applied to parts, WACKER® Silicone Paste P offers excellent water repellency, which helps protect against corrosion. The paste also becomes softer when subjected to shear stress or other mechanical stress, such as kneading. This softening effect often makes the processing of the paste easier.

ELASTOSIL® R 510/60 S is a high-consistency silicone rubber (HCR) that cures with peroxide and is specifically designed for manufacturing silicone-insulated cables and wires. It offers excellent performance within a wide temperature range of -55°C to +225°C. This product finds applications in various areas, including cables for household appliances, ignition and battery cables, as well as measurement and control cables.

ELASTOSIL® R 510/70 S is a peroxide-crosslinking, high-consistency silicone rubber (HCR) that is specifically designed for manufacturing silicone-insulated cables and wires. It offers excellent performance within a wide temperature range of -55°C to +225°C. This product finds applications in various areas, including cables for household appliances, ignition and battery cables, as well as measurement and control cables.

AGC Chemicals Americas, Inc. Fluon® PTFE G355 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon® PTFE G350 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon® PTFE G155 is a virgin granular PTFE homopolymer. It is a fine powder grade that can be used for molding, but is mainly intended as a feedstock for making filled compounds. Its properties allow for minimal insulation thickness while also tolerating a wide range of temperatures (-180°C to 260°C) compared to other insulators.

AGC Chemicals Americas, Inc. Fluon® PTFE G163 is a virgin granular PTFE homopolymer. It is a fine powder grade used for molding but also intended as a feedstock for making filled PTFE compounds. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.

CableFill® 300 bedding compound for wire and cable applications is:ExtrudableFlexibleEasy peelFree flowingFlame-retardantHalogen free

SuperOhm® 3768 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

SuperOhm® 3450 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

AquaGraft® 7020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Superohm® 2565 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for operation up to 450F (230C) and 25 kV in appropriate cable construction when extruded and cured consistent with industry standards.

Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

SuperOhm® 3754 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Excelene 1000 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

SuperOhm® 2575 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

CableFill® 200 bedding compound for wire and cable applications is:ExtrudableFlexibleEasy peelFree flowingFlame-retardantHalogen free

Superohm® 2560 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. Cables jacketed with this compound are recognized for balanced properties including excellent heat and deformation resistance at high temperatures, oil resistance, and superior mechanical properties and is suitable for operation up to 450F (230C) in appropriate cable construction when extruded and cured consistent with industry standards.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

AquaGraft® 8020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Superohm® 240 NL-HE is a RoHS compliant, highly flexible, colorable, polymeric composition in pellet form, based on EPR rubber, containing peroxide curing agent, ready for extrusion in a conventional CV or Dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for applications up to 25kV.

AquaGraft® 1-6008R is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.

EverGlide® MB2450 is a Thermoplastic polyurethane polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1550 is a Polyethylene terephthalate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.