Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Electrical & Electronics
Wire & Cable
Power Transmission & Distribution
Products in Power Transmission & Distribution: Food Contact Acceptable
21 Products found in Power Transmission & Distribution
Filters
Suppliers
Product Families
Functions
End Uses
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
ELASTOSIL® R Plus 4305/70
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Battery Cable, Plugs, Ignition Cables, Wires, Cables
Features:
Good Mechanical Properties, Low Compression Set, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency, Excellent Transparency Properties
Tear Strength:
39.0 - 39.0 kN/m
ELASTOSIL® R Plus 4305/70 is a two-component, high-consistency silicone rubber specifically developed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and demonstrate good to very good mechanical properties. This fast-curing silicone rubber displays good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
ELASTOSIL® R Plus 4305/80
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Battery Cable, Plugs, Ignition Cables, Wires, Cables
Features:
Good Mechanical Properties, Low Compression Set, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency, Excellent Transparency Properties
Tear Strength:
21.0 - 21.0 kN/m
ELASTOSIL® R Plus 4305/80 is a two-component, high-consistency silicone rubber specifically designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and display good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
WACKER® Silicone Paste P
Functions:
Lubricant (Internal), Lubricant (External)
Chemical Family:
Silicones
End Uses:
Wires, Cables
WACKER® Silicone Paste P is a translucent, vaseline-like paste that has a relatively stiff consistency and provides water repellency. When applied to parts, WACKER® Silicone Paste P offers excellent water repellency, which helps protect against corrosion. The paste also becomes softer when subjected to shear stress or other mechanical stress, such as kneading. This softening effect often makes the processing of the paste easier.
Envalior
Arnitel® EL250
Polymer Name:
Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:
Injection Molding
End Uses:
Wine Taps, Cable Jacketing, Kitchenware, Flexible Grips, Cables, Support Springs, Arnitel Spring In Monitor Arm, Robotics, Electronic Accessory Cases
Density:
1080.0 - 1080.0 kg/m³
Strain at Break:
300.0 - 300.0 %
Flexural Modulus:
20.0 - 20.0 MPa
Arnitel® EL250 is a high-performance thermoplastic copolyester (TPC) known for its combination of flexibility, high-temperature resistance, strength, and excellent processing properties. It is an innovative choice, serving as a lighter, more intelligent, and environmentally friendly substitute for traditional rubbers in industries such as automotive and E&E. This contributes to reduced environmental impact and system costs. Arnitel® EL250 is specifically designed for injection molding processes, making it efficient and versatile for manufacturing applications. Importantly, it meets food contact quality standards, ensuring its suitability for applications where food safety is essential.
Envalior
Arnitel® EL250-08
Polymer Name:
Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:
Injection Molding
Density:
1080.0 - 1080.0 kg/m³
Strain at Break:
300.0 - 300.0 %
Arnitel® EL250-08 is a high-performance thermoplastic copolyester (TPC) that excels in flexibility, high-temperature resistance, strength, and excellent processing properties. It is a forward-thinking choice, serving as a lighter, more intelligent, and environmentally friendly substitute for traditional rubbers in industries like automotive and E&E. This results in reduced environmental impact and system costs. Arnitel® EL250-08 is specifically designed for injection molding processes, making it efficient and versatile for manufacturing applications. Importantly, it meets food contact quality standards, ensuring its suitability for applications where food safety is paramount.
Envalior
Arnitel® EL430
Polymer Name:
Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods:
Injection Molding
Density:
1130.0 - 1130.0 kg/m³
Strain at Break:
785.0 - 785.0 %
Arnitel® EL430 is a high-performance thermoplastic copolyester (TPC) known for its impressive combination of flexibility, high-temperature resistance, strength, and excellent processing properties. It serves as an innovative and eco-conscious substitute for traditional rubbers in industries like automotive and E&E. This choice contributes significantly to reducing environmental impact and system costs. Arnitel® EL430 is designed for injection molding processes, making it efficient and versatile for manufacturing applications. Importantly, it meets food contact quality standards, ensuring its suitability for applications where food safety is a key consideration.
Polymer Dynamix
EverGlide® MB950
Functions:
Lubricant (Internal), Lubricant (External)
Labeling Claims:
Food Contact Acceptable
Carrier:
Polystyrenes (PS), Resin-based
Features:
Improved Wear, Food Contact Acceptable, Low Friction, Excellent Lubricity, Paintable, Good Scratch Resistance, Cost Effective, Ease of Handling, Good Printability, Good Thermal Stability, Good Abrasion Resistance, Low Migration
EverGlide® MB950 is a High Impact Polystyrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB450
Functions:
Lubricant (Internal), Lubricant (External)
Chemical Family:
Silicones
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Polyethylenes (PE)
Carrier:
Low-Density Polyethylene (LDPE), Resin-based
EverGlide® MB450 is a low density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB1950
Functions:
Lubricant (Internal), Lubricant (External)
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Polyamides
Carrier:
Polyamide 6 (PA 6), Resin-based
Features:
Improved Wear, Food Contact Acceptable, Low Friction, Excellent Lubricity, Paintable, Good Scratch Resistance, Cost Effective, Ease of Handling, Good Printability, Good Thermal Stability, Good Abrasion Resistance, Low Migration
EverGlide® MB1950 is a Polyamide 6 polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB1450
Functions:
Lubricant (Internal), Lubricant (External)
Chemical Family:
Silicones
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Polyesters
Carrier:
Polybutylene Terephthalate (PBT), Resin-based
EverGlide® MB1450 is a polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB1350
Functions:
Lubricant (Internal), Lubricant (External)
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Polycarbonates (PC)
Carrier:
Polycarbonates (PC), Resin-based
Features:
Improved Wear, Food Contact Acceptable, Low Friction, Excellent Lubricity, Paintable, Good Scratch Resistance, Cost Effective, Ease of Handling, Good Printability, Good Thermal Stability, Good Abrasion Resistance, Low Migration
EverGlide® MB1350 is a Polycarbonates polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB250H
Functions:
Lubricant (Internal), Lubricant (External)
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
High-Density Polyethylene (HDPE)
Carrier:
High-Density Polyethylene (HDPE), Resin-based
Features:
High Flow, Improved Wear, Food Contact Acceptable, Low Friction, Excellent Lubricity, Paintable, Good Scratch Resistance, Cost Effective, Ease of Handling, Good Printability, Good Thermal Stability, Good Abrasion Resistance, Low Migration
EverGlide® MB250H is a High-density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB1550
Functions:
Lubricant (Internal), Lubricant (External)
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Polyesters
Carrier:
Polyethylene Terephthalate (PET), Resin-based
Features:
Improved Wear, Food Contact Acceptable, Low Friction, Excellent Lubricity, Paintable, Good Scratch Resistance, Cost Effective, Ease of Handling, Good Printability, Good Thermal Stability, Good Abrasion Resistance, Low Migration
EverGlide® MB1550 is a Polyethylene terephthalate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB2450
Functions:
Lubricant (Internal), Lubricant (External)
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Thermoplastic Polyurethane (TPU)
Carrier:
Resin-based, Thermoplastic Polyurethane (TPU)
Features:
Improved Wear, Food Contact Acceptable, Low Friction, Excellent Lubricity, Paintable, Good Scratch Resistance, Cost Effective, Ease of Handling, Good Printability, Good Thermal Stability, Good Abrasion Resistance, Low Migration
EverGlide® MB2450 is a Thermoplastic polyurethane polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB1840
Functions:
Lubricant (Internal), Lubricant (External)
Labeling Claims:
Food Contact Acceptable
Carrier:
Resin-based, Polyoxymethylene (POM)
Features:
Improved Wear, Food Contact Acceptable, Low Friction, Excellent Lubricity, Paintable, Good Scratch Resistance, Cost Effective, Ease of Handling, Good Printability, Good Thermal Stability, Good Abrasion Resistance, Low Migration
EverGlide® MB1840 is a Polyoxymethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB150H
Functions:
Lubricant (Internal), Lubricant (External)
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Polypropylenes (PP)
Carrier:
Resin-based, Polypropylenes (PP)
Features:
High Flow, Improved Wear, Food Contact Acceptable, Low Friction, Excellent Lubricity, Paintable, Good Scratch Resistance, Cost Effective, Ease of Handling, Good Printability, Good Thermal Stability, Good Abrasion Resistance, Low Migration
EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB350
Functions:
Lubricant (Internal), Lubricant (External)
Chemical Family:
Silicones
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Polypropylenes (PP), Polyethylenes (PE)
Carrier:
Resin-based, Linear Low Density Polyethylene (LLDPE)
EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB3950
Functions:
Lubricant (Internal), Lubricant (External)
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Ethylene Vinyl Acetate (EVA), Polyvinyl Chloride (PVC)
Carrier:
Resin-based, Ethylene Vinyl Acetate (EVA)
Features:
Improved Wear, Food Contact Acceptable, Low Friction, Excellent Lubricity, Paintable, Good Scratch Resistance, Cost Effective, Ease of Handling, Good Printability, Good Thermal Stability, Good Abrasion Resistance, Low Migration
EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB150
Functions:
Lubricant (Internal), Lubricant (External)
Chemical Family:
Silicones
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Polypropylenes (PP)
Carrier:
Resin-based, Polypropylenes (PP)
EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB1150
Functions:
Lubricant (Internal), Lubricant (External)
Labeling Claims:
Food Contact Acceptable
Carrier:
Resin-based, Acrylonitrile Butadiene Styrene (ABS)
Features:
Improved Wear, Food Contact Acceptable, Low Friction, Excellent Lubricity, Paintable, Good Scratch Resistance, Cost Effective, Ease of Handling, Good Printability, Good Thermal Stability, Good Abrasion Resistance, Low Migration
EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
Polymer Dynamix
EverGlide® MB3450
Functions:
Lubricant (Internal), Lubricant (External)
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Polyvinyl Chloride (PVC)
Carrier:
Resin-based, Styrene Acrylonitrile (SAN)
Features:
Improved Wear, Food Contact Acceptable, Low Friction, Excellent Lubricity, Paintable, Good Scratch Resistance, Cost Effective, Ease of Handling, Good Printability, Good Thermal Stability, Good Abrasion Resistance, Low Migration
EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.