Products in Power Transmission & Distribution: Good Mechanical Prope...

POWERSIL® XLR® 630 A/B is a two-component silicone compound with excellent processing properties and low viscosity. It is designed for easy handling and application. The vulcanized rubber exhibits good mechanical properties and excellent dielectric behavior. It is a ready-to-use, two-component system that provides the desired characteristics for various applications.

POWERSIL® 3525 MH silicone rubber is a one-component, ready-to-use, addition-curing compound that produces an electrically insulating, highly erosion-resistant silicone elastomer upon curing. Compared to conventional silicone rubber, it shows fast curing, with curing time being reduced by 30 to 50% depending on wall thickness and available machinery and runner system. No peroxide decomposition products are released during the curing process.

POWERSIL® 3100 MH silicone rubber is a one-component, addition-curing compound that is ready to use and cures to an electrically insulating, highly erosion-resistant silicone elastomer. This product offers comparatively fast curing times compared to conventional silicone rubber, reducing cure times by 30-50%, depending on the wall thickness of the application, as well as the available machinery and runner system. Furthermore, no peroxide decomposition products are released during the curing process, reducing any potential hazards. The curing system also eliminates the risk of curing inhibition by oxygen.

ELASTOSIL® R Plus 4305/70 is a two-component, high-consistency silicone rubber specifically developed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and demonstrate good to very good mechanical properties. This fast-curing silicone rubber displays good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

ELASTOSIL® R Plus 4305/80 is a two-component, high-consistency silicone rubber specifically designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and display good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.

POWERSIL® 311 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product is specifically recommended for the production of electrical insulating equipment used outdoors, such as composite insulators, arrester housings, bushings, and more. It is particularly suitable for extruded parts that are cured in the air.

POWERSIL® 310 MH is a one-component, ready-to-use peroxide curing compound. It cures to form an electrically insulating silicone elastomer with high erosion resistance. This product exhibits very good arc resistance, suitable dielectric properties, and good mechanical properties. POWERSIL® 310 MH is specifically recommended for the production of various types of electrical insulating equipment used in outdoor applications, such as composite insulators, arrester housings, bushings, and more.

POWERSIL® 190 MH is a one-component silicone rubber compound that is peroxide-curing and ready to use. It is specifically formulated for high voltage applications. When used to extrude or mold insulators, POWERSIL® 190 MH provides excellent resistance to arcing and tracking. This enhanced resistance helps improve the reliability of electrical systems and reduces power interruptions.

POWERSIL® 3500 MH is a high-temperature vulcanizing (HTV) silicone rubber, used as an addition-curing one-component compound for the production of press-cured articles. The resulting vulcanized products are resistant to tracking and display good to very good mechanical properties. The compound does not release any peroxide split products during cure or post-cure processes. The curing system is significantly faster compared to peroxide-curing materials; cure time can be reduced by 30-50%, depending on the wall thickness.

ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.

AGC Chemicals Americas, Inc. Fluon® PTFE G350 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

AGC Chemicals Americas, Inc. Fluon® PTFE G355 is a fine agglomerated, free-flowing powder specifically designed for automatic molding, isostatic molding, and general molding techniques. These grades have high bulk density with excellent flow characteristics. Articles molded from Fluon® PTFE G350 and G355 exhibit good mechanical properties and surface finish.

SuperOhm® 3768 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

AquaGraft® 7020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

Reddish - orange colored polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

SuperOhm® 3754 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.

Superohm® 2560 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. Cables jacketed with this compound are recognized for balanced properties including excellent heat and deformation resistance at high temperatures, oil resistance, and superior mechanical properties and is suitable for operation up to 450F (230C) in appropriate cable construction when extruded and cured consistent with industry standards.

Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.

SuperOhm® 2575 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.

AquaGraft® 8020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties

MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to MIL-I-24768/3, Type GEB.

MC511FR is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include structural applications when used in elevated temperatures. MC511FR also complies with MIL-I-24768/28, Type GEB-F. Certification to IEC standard is pending.

MC511A is a high strength, glass epoxy laminate that is specially formulated to meet power generation producer’s exacting standards where higher strength at elevated temperatures are required. MC511A is certifiable to MIL-I-24768/3, Type GEB, IEC-60893-3-2 EP GC 203 and is halogen free to meet the European restrictions.

THERMODAN® HF TP870BU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP870NU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP870 has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP870B has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

Beijing New Friend Insulation Material F890H_H grade halogen - free is free flame retardant with leakage resistant laminates.

Voltoid® HP-450 is a high density composite designed to provide superior flame barrier properties and dimensional stability at high temperatures. Composed of aramid fiber, filler, and polymeric binders, it features low water absorption and exhibits outstanding electrical and mechanical properties.

276 Assembled Roving is is based on E6 glass formulation, coated with a silane-based sizing. 276 is compatible with unsaturated polyester, yinyl ester, and epoxy resins. It is designed or filament winding and pultrusion applications. 276 is suitable for use in tent pole, outdoor travel goods, pressure vessels, pipes, craft and chemical storage tanks.

Voltoid® D-800 is a resin-bonded cellulose fiber composite material. The D-800 series of products are specially formulated to provide consistent electrical and mechanical performance under conditions of variable ambient humidity and/or moisture. D-800 is recognized by Underwriters Laboratories for continuous use as an electrical and mechanical barrier to 105˚C. It is easily fabricated by being punched and blanked.

352B Direct Roving for LFT is coated with a silane-based sizing compatible with PA, TPU, and other resins. 352B is designed for LFT-G and LFT-D process. Its superior permeability with matrix resin makes it suited in automotive, electronic & electrical, military, telecommunication, construction, and sporting industry.