Products in Medical: Food Contact Acceptable

Hexamoll® DINCH functions as a non-phthalate plasticizer ideal for PVC and other polar polymers, especially in applications involving close human contact. Its clear, colorless, and almost odorless liquid composition makes it practically anhydrous. This plasticizer exhibits compatibility with common organic solvents, as well as other monomeric plasticizers used in PVC, while being nearly insoluble in water.

SILPURAN® 6400/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/70 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/70 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6000/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6740/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber compound with a short curing time. Vulcanizates are noted for their self-adhesive properties on various substrates and excellent mechanical properties. SILPURAN® 6740/40 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6700/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6600/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® AUX 8251 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for addition-cured high-consistency silicone rubber. SILPURAN® AUX 8251 RO is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/40 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/40 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 5040/60 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required post-cure. Articles made from ELASTOSIL® LR 5040/60 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 34004/50 A/B is a paste-like, white, two-component liquid silicone rubber with a very short curing time. Vulcaniates are noted for their radio-opaqueness. ELASTOSIL® LR 34004/50 A/B contains barium sulfate as a radio-opaque additive, which meets the requirements of the US and European Pharmacopeia.

ELASTOSIL® LR 5040/20 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/20 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

ELASTOSIL® LR 5040/45 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/45 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6000/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6610/60 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam (≤ 75 kGy). SILPURAN® 6610/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6610/50 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam ( 75 kGy). SILPURAN® 6610/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6610/40 A/B is a paste-like, two-component compound. Its vulcanizates are noted for their significantly reduced tendency towards radical-induced reattachment, i.e., healing, of slit valve surfaces during sterilization by gamma irradiation and e-beam (≤ 75 kGy). SILPURAN® 6610/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 3003/80 US A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003/80 US A/B series. It is a paste-like, easily pigmentable two-component compound noted for its high transparency, excellent mechanical and electrical properties, and ability to be molded into intricately shaped, precision parts. It is used for health care applications, including short-term implants. Very brief molding cycles for intricately shaped and flash-free parts are possible.

SILPURAN® 6000/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 5040/50 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/50 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® 6760/50 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Vulcanizates are noted for their self-adhesive properties to various substrates combined with a low coefficient of friction. SILPURAN® 6760/50 A/B is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6400/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/20 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/20 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/70 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/70 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6000/30 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/30 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6600/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6700/40 A/B is a paste-like, easily pigmentable two-component compound with a very short curing time and good mechanical and electrical properties. Its vulcanizates are noted for their self-adhesive properties on various substrates. SILPURAN® 6700/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

SILPURAN® 6600/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. Compared to the SILPURAN® 6000 series, the coefficient of friction of a post-cured article made of SILPURAN® 6600 is reduced by 50–70%. SILPURAN® 6600/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

ELASTOSIL® LR 3003/70 US A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound. It is noted for its high transparency, excellent mechanical and electrical properties, and ability to be molded into intricately shaped, precision parts. This series is used for health care applications, including short-term implants. Very brief molding cycles for intricately shaped and flash-free parts are possible.

ELASTOSIL® LR 5040/30 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/30 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

SILPURAN® AUX 8250 RO is a white, barium sulfate-containing batch that is used as a radio-opaque additive for peroxide-cured high-contrast silicone rubber. SILPURAN® AUX 8250 RO is designed for medical applications in compliance with the WACKER SILICONES HEALTH CARE POLICY, including implantation for less than 30 days.

SILPURAN® 6400/60 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/60 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

VESTAMID® D18 is a medium-viscosity polyamide 612 compound that is specifically designed for extrusion and injection molding processes. It is commonly used for applications such as monofilaments, including toothbrush bristles. The material exhibits low water absorption, which contributes to the exceptional dimensional stability of components even when exposed to varying ambient humidity conditions. VESTAMID® D18 is suitable for profile extrusion processing techniques.

Acetron® GP Polyoxymethylene POM-C / Ertacetal® C Polyoxymethylene POM-C - the ultimate general-purpose, copolymer acetal grade that offers unparalleled performance and versatility.Features:Porosity free nature ensures a high-quality finish and long-lasting durabilityLow moisture absorption ensures that your components remain stable and dimensionally accurate, even in humid environmentsExcellent machinability allows for easy processing, reducing costs and increasing efficiencyBenefits:The porosity-free nature of Acetron® GP POM-C makes it ideal for Food Contact and medical applications, meeting FDA, NSF, Canada AG, and SSI Standard compliance requirementsThe low moisture absorption capability of this material ensures that your components remain stable and dimensionally accurate, even in humid environments, increasing the lifespan of your productThe excellent machinability of Acetron® GP POM-C makes it easy to process, reducing costs and increasing efficiency in your manufacturing processApplications:Food Contact and Medical ApplicationsBearings and BushingsGears and Electrical ComponentsMedical and Diagnostic EquipmentValves and Fluid Handling Components"

Fluorosint® 207 is an advanced polymer material that combines the excellent chemical resistance, low friction, and high temperature properties of PTFE (polytetrafluoroethylene) with added food contact compliance and unique combination of dimensional stability and creep resistance. This material is designed to excel in demanding applications where high performance, reliability and food contact compliance are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceFood Contact Compliant (FDA): safe for use in food and pharmaceutical applicationsHigh dimensional stability and creep resistance: ensures consistent performance over timePTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionBenefits:Low coefficient of friction, making it ideal for aggressive service bearing and bushing applicationsFood Contact Compliance (FDA), allowing for use in food and pharmaceutical industriesHigh dimensional stability and creep resistance, ensuring consistent performance over timeEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Food and pharmaceutical applications where FDA compliance is requiredLow friction bearing and bushing applications in aggressive service environmentsLower pressure seats and seals, where virgin PTFE failsChemical processing industries where high chemical and hydrolysis resistance is neededAny application that requires low friction and dimensional stability in harsh environments.Fluorosint® 207 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. With its added food contact compliance and unique properties, Fluorosint® 207 is an excellent choice for applications in food, pharmaceutical and chemical processing industries.

Fluorosint® HPV is an advanced polymer material that combines the excellent chemical resistance and low friction properties of PTFE (polytetrafluoroethylene) with added strength, stiffness, and wear resistance, making it ideal for high-performance bearing applications.Key features:High PV (pressure-velocity) and low “k” or wear factor: Optimized for high performance and durability in bearing applicationsFDA Compliant: Suitable for use in food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speedsFDA Compliant : Suitable for applications where food contact compliance may be requiredBenefits:High performance and durability in bearing applications: Enables equipment to run efficiently and safelyFDA Compliance: Provides new design options for food processing and pharmaceutical applicationsHigh strength and stiffness: Can handle heavy loads and high speeds, making it ideal for demanding applicationsImproved reliability and safety in critical applications.Application:Bearing applications where high PV and low “k” or wear factor are neededFood processing and pharmaceutical applications where FDA compliance is requiredAny application that requires high performance and durability in harsh environmentsFluorosint® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's FDA compliant, making it suitable for food processing and pharmaceutical applications, it's ideal for high-performance bearing applications and it's available in custom shapes for efficient production. With its excellent chemical resistance, low friction, and high performance in harsh environments, Fluorosint® HPV is an excellent choice for equipment manufacturers looking to improve the performance and safety of their products.