Products in Medical: Low Odor

The Addisil™ 470 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 40 and 80 Shore A for medical applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. The series is especially suitable for the manufacture of extruded transparent tubing and profiles for use in healthcare applications.Key Features and Benefits- High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months from date of manufacture.

Nylene Medium viscosity, extrusion grade nylon 6 resin suitable for film co-extrusion, coatings, and compounding applications Excellent melt stability and good melt strength Excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die

Silopren™ LSR 4020 is a two-component liquid silicone rubber for injection molding processes. Silopren™ LSR 4020 TP 3364 can be used to produce medical technical articles with high transparency and excellent rubber elastic properties.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 4020 TP 3364 are distinguished by the following properties: excellent biocompatibility high stability to ozone and ultraviolet light neutral odor and taste sterilisable with ethylene oxide, steam and gamma radiation good transparency high thermal stability high recovery after puncture easy pigmentable with the LSR Color Pastes. Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 4020 TP 3364 is particularly suitable for the following elastomeric articles: sealing elements, catheters, vibration dampers, tube connectors, parts for medical technical equipment, mats.

Silopren™ LSR 4670 is a two-component liquid silicone rubber for injection molding processes. The material performance is particularly characterized by high reactivity, low viscosity and high tear strength. The LSR 4670 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanisates consisting of LSR 4670 are distinguished by the following properties: Low viscosity Fast cure High tear strength Sterilisable with ethylene oxide, steam and gamma radiation Long service life at dynamic stress Neutral odor and taste High recovery after puncture High temperature stability.

The Addisil™ IND 1060 E series is a one-component heat curable rubber for making elastomers (HCE) with a hardness range between 50 and 80° Shore A for industrial applications. This series is based on a platinum cure system, which is particularly suitable for high value extrusion applications where regulatory compliance, transparency, mechanical performance and/or productivity are important. Application examples are oven door profiles and tubing for food applications.Key Features and Benefits High transparency, no yellowing Excellent mechanical properties Dry, non-stick surface Odorless during processing and in its application Fast curing One-component, ready to use Shelf life of 3 months as of manufacturing date Suitable for compliance with the food contact regulations FDA 21 CFR 177.2600 and the BfR section XV recommendations.

Silopren™ LSR 4640 is a two-component liquid silicone rubber for injection molding processes. The material performance is particularly characterized by high reactivity, low viscosity and high tear strength. The LSR 4640 enables particularly the production of parts for healthcare devices covering by USP Class VI such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanisates consisting of LSR 4640 are distinguished by the following properties: Low viscosity Fast cure High tear strength Sterilisable with ethylene oxide, steam and gamma radiation Long service life at dynamic stress Neutral odor and taste High recovery after puncture High temperature stability compliance with US Pharmacopeia XXIII, Class VI (maximum contact time with human tissue 28 days.

Silopren™ LSR 4080 is a two-component liquid silicone rubber for injection molding processes. The LSR 4080 enables particularly the production of parts for healthcare devices such as sealing elements, O-rings, diaphragms, ear plugs, bellows, baby teats, respiratory devices, air vent flaps, tube connectors, catheters and mats.Key Features and BenefitsVulcanizates consisting of LSR 4080 are distinguished by the following properties: Good rubberlike properties Excellent biocompatibility Sterilisable with ethylene oxide, steam and gamma radiation Long service life at dynamic stress Neutral odor and taste High recovery after puncture High temperature stability Easy pigmentable with LSR color pastes.