Products in Medical: Processing Aid

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® R 812 is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

These PTFE powders are Natural Prime PTFE micronized to various particle sizes and are FDA compliant for applications requiring food contact. MicroFLON 1437FG is designed for food contact applications. These applications include: food processing, machine parts, and medical devices.

These PTFE powders are Natural Prime PTFE micronized to various particle sizes and are FDA compliant for applications requiring food contact. MicroFLON 1433FG is designed for food contact applications. These applications include: food processing, machine parts, and medical devices.

These PTFE powders are Natural Prime PTFE micronized to various particle sizes and are FDA compliant for applications requiring food contact.

NOVIS P-490 is an Isotactic low molecular weight polypropylene with enhanced flow properties. Melting point and most of its mechanical properties are similar to conventional PP. It is its low molecular weight and narrow molecular weight distribution which impart NOVIS P-490 high melt flow rate.

Haftolat or the dry form, Haftolat/P, are very effective process aids produced from EPM rubber. I

Dispergator OX is a Polymer- and water-free granulated processing aid, suitable for all natural and synthetic elastomers, and especially helpful in polymer blends. Dispergator OX is particularly recommended for pressureless continuous curing processes, as it con-tains no moisture.

Dispergator KB contains 25 % more active material and less moisture than Dispergator DS. It fa-vourably can be used in all rubber compounds which are intended to be cured by UHF, LCM or hot air. It also has good compatibility with most polymers.

Mediaplast AT is a very effective process aid to improve flow properties and to reduce the tackiness of rubber compounds regardless of the polymer used. Processing of CR and ACM compounds in par-ticular is significantly improved by adding a small amount of Mediaplast AT. It improves the demolding properties of technical rubber parts. The sticking of uncured compounds to internal mixers, open mills and conveyor belts will be visibly diminished by the use of Mediaplast AT.

Kettlitz-Dispergator FD is a highly effective processing aid for compounds in alimentary contact. It has been developed referring to the regulations of FDA and BfR XXI (former BGVV resp. BGA regulation). It is a combination of zinc salts and hydrocarbons in surface active agents.

Mediaplast WH-P is a Processing aid and homogenizing agent with non-staining properties in order to improve the stickiness of synthetic rubber compounds. Especially in NBR, EPDM, SBR and EVA the application of Mediaplast WH results in shorter mixing times and better homogeneity.

Mediaplast EV/F is an effective processing aid for the treatment of very sticky polymers, mainly EVA compounds. EVA types with a vinyl acetate content of more than 40 % tend to stick to open mills, internal mixers and even extruder screws.

Pertac/GR is a multifunctional process aid based on 1.2-polybutadiene converted into free-flowing granules.

Mediaplast WH is a Processing aid and homogenizing agent with non-staining properties in order to improve the stickiness of synthetic rubber compounds. Especially in NBR, EPDM, SBR and EVA the application of Mediaplast WH results in shorter mixing times and better homogeneity.

PPA 21 is a polymer processing aid with PE Resin. It is used in building, construction & landscaping ,consumer goods ,healthcare ,packaging.

PPA 26D is a polymer processing aid with PE Resin. It is used in consumer goods , healthcare ,packaging.

Haftolat or the dry form, Haftolat/P, are very effective process aids produced from EPM rubber. I

Kettlitz-Dispergator SI/GR is a new generation of processing aid based on a silicone combination. The proc-ess aid has been developed especially for EPDM and EVA compounds to improve processability.